About the AudioQuest Evergreen
AudioQuest believes good cable design is all about damage control. In AQ's view, the perfect cable would be one that adds nothing no noise, no distortion to the original signal. Even AudioQuest's affordable Evergreen cables embody this philosophy. They bring together some of AQ's most advanced designs and materials, for excellent sound quality from a single joined cable that's relatively thin and lightweight.
Solid Long-Grain Copper (LGC) conductors
One of the most important materials that goes into an audio cable is the metal used for its conductors the parts of the cable that actually carry the signal. Unlike lesser cables, AudioQuest's Evergreen features conductors made from solid Long-Grain Copper rather than stranded metal, for improved performance and better transparency.
Advanced cable geometry
While many cables use a single path for both the ground and shield, AudioQuest uses a design they call "double-balanced asymmetrical geometry." This design separates the ground and shield paths for clean, quiet performance.
Cold-welded, gold-plated connectors
All the details of the cable's construction are well thought-out. For instance, the Evergreen's connectors are cold-welded, rather than soldered, which eliminates a common source of distortion found in many other audio cables.
- length: 1 meter/3.3 feet
- stereo cable with dual RCA connectors at each end
- solid Long-Grain Copper (LGC) conductors help improve performance
- foamed polyethylene insulation for low distortion
- metal-layer NDS (Noise Dissipation System) shields against RF interference
- double-balanced asymmetrical cable geometry separates the ground and shield for quieter performance
- cold-welded, gold-plated RCA plugs feature a solder-less design for lower distortion
- warranty: 5 years
- Our 60-day money-back guarantee
- MFR # EVERG01R
What's in the box:
- 1-Meter stereo RCA cable
More details on the AudioQuest Evergreen
Evergreen Series Stereo RCA Cable: The AudioQuest Evergreen stereo RCA cable is terminated by a gold-plated male stereo RCA connectors on each end. The AudioQuest Evergreen stereo RCA cable is available in the following lengths.
- 0.6 meter (2')
- 1 meter (3' 4")
- 2 meter (6' 7")
- 3 meter (10')
- 5 meter (16' 5")
- 8 meter (26' 3")
- 12 meter (39' 5")
Solid Long-Grain Copper Conductors (LGC): Solid conductors eliminate strand-interaction distortion. Evergreen's solid Long-Grain Copper allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. OFHC is a general metal industry specification regarding "loss" without any concern for distortion. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance.
Foamed-Polyethylene Insulation: Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. Evergreen uses air-filled Foamed-Polyethylene Insulation on both conductors because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.
Metal-Layer Noise-Dissipation System (NDS): 100% shield coverage is easy; preventing captured RF Interference from modulating the equipment's ground reference requires AQ's Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment's ground plane.
Double-Balanced Asymmetrical Geometry: Purposely designed for single-ended applications, Double-Balanced Asymmetrical Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.
Cold-Welded, Gold-Plated Plugs: This plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion.
Directional: Arrows on the connectors indicate the preferred signal path from the source component to the input.
10 questions already asked