Weego JSOBD Memory Saver
Disconnect the battery without losing your car's electronic presets
Our take on the Weego JSOBD Memory Saver by Crutchfield's Bob Bihlmayer
Keep your vehicle's presets
Don't lose all your presets when you disconnect your car's battery. Weego's JSOBD memory saver preserves your car's electronic settings, including radio settings, clock, seat positions, alarms, GPS, keyless entry codes and more, when the battery is disconnected. It's simple to use: just connect the memory saver to your car's OBDII port, connect the other end to the 12V/10A output on your Weego power pack, then power up the Weego before disconnecting the battery.
An LED indicator shows you that you've made the correct connection to the vehicle's OBDII port. The affordable JSOBD is easier to use than other memory savers. Warranty: 18 months.
What's in the Box:
- OBDII 12V memory saver (OBDII connector and attached 55" DC cable)
- Owner's Manual & Warranty
Why Shop With Us?12 Reasons.
OBDII 12V Memory Saver: The JSOBD OBDII 12V Memory Saver is an optional accessory for elect Weego Jump Starters (sold separately). The OBDII 12V Memory Saver allows you to disconnect your vehicle's battery without losing electronic presets including - radio/clock settings, seat positions, alarms, GPS, keyless entry codes, and more.
Compatibility: Compatible with the Weego Jump Starter 44, Jump Starter 66, and the Jump Starter Battery+ Heavy Duty (JS12), as well as Professional (JS18) models - all sold separately. OBDII ports are found in vehicles produced post 1996. This product will not work on vehicles with an OBDI port.
Note: Read vehicle's owner's manual regarding the OBDII connector. The vehicle manufacture may have specific cautions and instructions about replacing your vehicle battery. It will also show you how to locate your vehicle's OBDII port.
OBDII Port: Simply attach ODBII 12V Memory Saver to your vehicle's OBDII port, connect other end of Memory Saver cable to 12V/10A output on a compatible Weego Jump Starter and power on the Weego before disconnecting the vehicle's battery. An LED light indicates proper connection to your vehicle's ODBII port.
- Before connecting the OBDII 12V Memory Saver, turn off all electronics in your vehicle (air conditioner, heater, radio, lights, chargers, etc.) to prevent any damage to the WeegGo Memory Saver.
- Make sure your vehicle has been turned off for at least 20 minutes before using the OBDII 12V Memory Saver. This is how long it takes for the vehicle's computer to shut down.
- Do not start your vehicle while a Weego Jump Starter is connected to your vehicle through the JSOBD OBDII 12V memory saver.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.