Contact us
Close contact box

Definitive Technology DI 5.5S Rough-in Brackets

Pre-construction brackets for Definitive Technology DI 5.5S in-wall speakers

Item # 73555SRIK

Item # 73555SRIK

Ships from distributor

Out of Stock
C$79.99 pair
Add to wishlist

About the Definitive Technology DI 5.5S Rough-in Brackets

These pre-construction brackets are designed for Definitive Technology DI 5.5S in-wall speakers. Use the adjustable arms to attach the bracket to studs or joists before the drywall goes up.

Product highlights:

KEEP READINGREAD LESS

What's in the box:

  • 2 Metal in-wall mounting brackets
  • 4 Metal mesh arms

Customer reviews

We don't have any reviews, yet.
Be the first to review this product

Loading reviews...

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the Definitive Technology DI 5.5S Rough-in Brackets

Stacey B.

Product Research

Features

Overview: When planning speaker installations in new construction many installers find it useful to install rough-in brackets onto wall studs or ceiling joists so that the sheetrock contractor knows precisely where to cut the appropriate size holes. The DI Series rough-in brackets were custom designed from the ground up to be easy to install. The "arms" are metal mesh and can easily be attached to wood or metal studs using nails, dry-wall screws, or construction staples. The arms easily detach and can be positioned at various points around the bracket to accommodate unusual stud/joist locations. The mounting bracket is heavy gauge steel that will not bend or break with rough handling and sloppy drywall cutting by subcontractors. The convenient wire tie loop is scored to allow easy snap off once the speaker is installed.

Compatibility: The DI 5.5S rough in bracket is compatible with Definitive Technology's 5.5" Disappearing In-Wall Loudspeaker (DI 5.5S).

Note: DI Rough-in Brackets are packaged two to a carton (2 mounting brackets and 4 mounting arms). Mounting screws not supplied.

Metal Brackets: The mounting brackets are fabricated from heavy duty painted stamped steel. There are no sharp metal edges to cut an installer's hands and they are ultra rigid, so that when drywall is laid over and cut the brackets will not bend or break. The mounting bracket requires a 6.375" x 6.375" square cutout.

Mounting Arms:  The metal mesh mounting arms snap onto the metal bracket in a variety of positions to cover almost any installation. The wings can be attached with nails, staples or screws; and can be bent and easily trimmed with tin snips. They are also thin enough to make stud notching simple. The wire tie loop easily breaks away when the speaker is installed.

Dimensions:

  • Mounting Brackets: Width = 8.3125", Height = 8.3125", Depth = 0.8125"
  • Mounting Arms: Width = 12.4375", Height = 1.9375", Depth = 0.5625"
  • Overall Dimension: Width = 32.8125", Height = 8.3125", Depth = 0.8125"
  • Cutout: Width = 6.375", Height = 6.375", Depth = 0.4375"

Loading accessories...

Customer Q&A

Loading articles...

TOP