Contact us
Close contact box

Definitive Technology DI 8R Rough-in Brackets

Pre-construction brackets for Definitive Technology DI 8.5R in-ceiling speakers

Item # 7358RRIK

Top Seller

Item # 7358RRIK

Ships from distributor

Out of Stock
C$79.99 pair
Add to wishlist

About the Definitive Technology DI 8R Rough-in Brackets

These pre-construction brackets are designed for Definitive Technology DI 8R in-ceiling speakers. Use the adjustable arms to attach the bracket to studs or joists before the drywall goes up.

Product highlights:

KEEP READINGREAD LESS

What's in the box:

  • 2 Metal in-wall mounting rings
  • 4 Metal mesh arms

Customer reviews

Loading reviews...

Definitive Technology DI 8R Rough-in Brackets reviews

Average review:

3 reviews

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

I'm so glad I used these

Jamie B from madison, WI on 1/29/2016

Verified customer (What's this?)
Verified employee purchase (What's this?)

I'm very glad I used these. It allowed me to line them up how I wanted before the drywall. After the drywall went up and I put the speakers in, they looked amazing.

Pros: Easy setup, easy to align

Cons: Staples don't go through the metal bands very easy. But you can screw through the metal bands.

Crutchfield response on

0 of 0 found this helpful

Definitive Technology DI 8R Rough-in Brackets

Crutchfield customer from Merion, PA on 3/25/2014

Verified customer (What's this?)
Verified employee purchase (What's this?)

These rings are a bit expensive, but really easy to use especially in an old house with uncertain joist placements. Plenty of extra strap length for attachment, and they keep the wire secure.

Pros:

Cons:

Crutchfield response on

0 of 0 found this helpful

Definitive Technology DI 8R Rough-in Brackets

JimA from Fairfield ,California on 4/18/2011

Verified customer (What's this?)
Verified employee purchase (What's this?)

I don't think these people do anything half way ! Easy to put together and install with nice housing for the drywall guys to roto-zip around and it has a place to hold the end of the speaker wire also. There were no instructions with it but it was quite cut and dry to clip the wings on !! Will buy again soon I hope !

Pros:

Cons:

Crutchfield response on

0 of 0 found this helpful

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the Definitive Technology DI 8R Rough-in Brackets

Stacey B.

Product Research

Features

Overview: When planning speaker installations in new construction many installers find it useful to install rough-in brackets onto wall studs or ceiling joists so that the sheetrock contractor knows precisely where to cut the appropriate size holes. The DI Series rough-in brackets were custom designed from the ground up to be easy to install. The "arms" are metal mesh and can easily be attached to wood or metal studs using nails, dry-wall screws, or construction staples. The arms easily detach and can be positioned at various points around the bracket to accommodate unusual stud/joist locations. The center ring is heavy gauge steel that will not bend or break with rough handling and sloppy drywall cutting by subcontractors. The convenient wire tie loop is scored to allow easy snap off once the speaker is installed.

Compatibility: The DI 8R rough in bracket is compatible with Definitive Technology's 8.0" Disappearing In-Wall Loudspeaker (DI 8R).

Note: DI Rough-in Brackets are packaged two to a carton (2 mounting rings and 4 mounting arms). Mounting screws not supplied.

Metal Rings: The center rings are fabricated from heavy duty painted stamped steel. There are no sharp metal edges to cut an installer's hands and they are ultra rigid, so that when drywall is laid over and cut the brackets will not bend or break. The center ring requires a 8.8125" diameter cutout.

Mounting Arms:  The metal mesh mounting arms snap onto the center ring in a variety of positions to cover almost any installation. The wings can be attached with nails, staples or screws; and can be bent and easily trimmed with tin snips. They are also thin enough to make stud notching simple. The wire tie loop easily breaks away when the speaker is installed.

Dimensions:

  • Metal Ring: Diameter = 10.875", Depth = 0.8125"
  • Mounting Arms: Width = 12.4375", Height = 1.9375", Depth = 0.5625"
  • Overall Dimension: Width = 35.25", Height = 10.875", Depth = 0.8125"
  • Cutout: Diameter = 8.8125", Depth = 0.4375"

Loading accessories...

Customer Q&A

Q
Crutchfield asked: Why did you buy this?
A
I have a new build so no drywall yet. 1. This allows me to precisely plan the speaker locations before drywall 2. Based on the dynamic range of these speakers, I will prefer more robust joist support other than just drywall. [ Raphael  May 07, 2017 ]
A
Using them to place in home during new construction for future speakers. [ Thomas  Mar 04, 2016 ]

Loading articles...

TOP