About the Memphis Audio MSA1
The sound of Memphis
The sound of Memphis
Memphis Audio has been making the world of car audio better since 1965, and their MClass Series speakers are the culmination of quality construction, thoughtful design, and years of experience. With a tradition of great American music in mind, Memphis Audio builds these speakers to reproduce every song with authenticity and impressive detail.
Powerful, crisp highs
Do your high frequencies justice with M Series MSA1 1" aluminum dome tweeters. Memphis includes flush- and surface-mounting gear so you can mount these tweeters in the right spot to create the best possible soundstage for your car. Once installed, you'll notice crisp details in your music that you've never heard before. These tweeters will handle up to 75 watts RMS, so they'll be a welcome addition to just about any system.
Memphis also includes external crossovers to ensure that only the high frequencies are delivered to these tweeters.
Installation note: You'll need a pair of our universal backstraps to install these tweeters in the factory locations.
- 1" aluminum dome tweeters (pair)
- flush- and surface-mount hardware included
- external crossovers included
- handles up to 75 watts RMS (100 watts peak power)
- frequency response: 2,000-20,000 Hz
- sensitivity: 88 dB
- top-mount depth: 11/16"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # MSA1
What's in the box:
- 2 Tweeters (18" Wire terminated with quick-slide connectors attached)
- 2 Crossovers
- 2 Adhesive backed crossover mounting pads
- 2 Flush mount housings (with tweeters installed)
- 2 Flush mount retaining rings
- 2 Angled surface mount housings
- Four 3/4" Flat-head screws
- Installation instructions
More details on the Memphis Audio MSA1
Features & specs
|Tweeter Design||1" Dome|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||88|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||2000 - 20k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||75|
|Peak Power Handling (Watts)||150|
|Top-mount Depth (Inches)||1 1/16|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||2 1/16|
|Mounting Height (Inches)||0.175|
Mounting: The tweeters offer multiple mounting options; choose flush mount, surface mount, or angled surface mount. The tweeters are shipped in the flush mount housings and the angled surface mount housings are included. The back of the flush mount housing and the top of the angled surface mount housing combine to create the (non-angled) surface mount housing. Once installed in any of the housings, the tweeter will pivot slightly to optimize imaging.
|Flush Mount||Surface Mount||Angled Surface Mount|
|Mounting Depth||1.05"||screw depth||screw depth|
Crossover: The 12 dB/octave crossovers' inputs are screw terminals that will accept bare wire or spade connectors up to ¼" wide. The 16" tweeter output wire (labeled TW+/TW-) is terminated with quick slides to easily connect to the quick slides on the wire attached to the tweeters. Each crossover also has a full range output (labeled WF+/WF-), 16" wires terminated with quick slides (0.25" positive/0.11" negative), not crossed over. The tweeter output level can be changed from flat to -3 dB by moving a jumper pin inside each crossover.
- Width: 1¾"
- Height: 1"
- Length: 2¾" (3¾" including wiring)
3 questions already asked