About the Memphis Audio VIVREMV2
Wireless remote control
Wireless remote control
You can control the volume of a Memphis SixFive Series V2 subwoofer amplifier wirelessly from your front seat or dash with the VIVREMV2 remote. It sends its control signal to your sub amp using the reliable 2.4 GHz wireless band, so you won't have to run a wire throughout your vehicle in order to control the level of bass.
Re-chargeable and more
You recharge the VIVREMV2's battery with the included charging connector either at home or in your car if it has a USB connection available. An LED mirrors the amp's onboard light, indicating power on and protection mode. If your amp does go into thermal protection mode, a push of the VIVREM's knob will reset the amplifier so you can resume playing bass — hopefully at a lower volume.
More than one sub amp?
This wireless remote can control up to four SixFive sub amps at the same time, so if you want to go nuts with bass, be our guest.
- wireless remote level control for Memphis SixFive Series sub amps
- includes USB-MINI charging cable and USB-MINI to pigtail hardwire cable
- charge lasts for approximately 3000 hours (charges in 4 hours)
- uses 2.4 GHz band wireless connection
- LED shows amp status: power on, thermal or short protection
- knob pushes in to reset amp from thermal protection mode
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # VIVREMV2
What's in the box:
- Wireless remote bass control
- 26" USB charging cable (type-A on one end / type-C on other end / 2.0)
- 28" Hardwiring cable (type-C on one end / bare wire on other end)
- Mounting bracket
- Two 3/8" screws
More details on the Memphis Audio VIVREMV2
Overview: The Memphis Car Audio VIVREMV2 wireless bass control is an accessory for select models of the SixFive V2 series of power amplifiers. The VIVREMV2 automatically pairs with the amplifier when it powers up. The remote can be mounted horizontally or vertically with the included mounting clip. The dimensions of the VIVREMV2 are: 1.60"W, 2.53"H, 1.23"D.
Compatibility: The VIVREMV2 is compatible with the mono and 5-channel models of the SixFive V2 series amplifiers. This includes the following models: VIV1300.5V2, VIV2200.1V2, VIV1500.1V2, VIV1100.1V2, VIV750.1V2, VIV3000.1V2, VIV900.5V2, and VIVBELLE (subwoofer channel only for 5-channel models).
Note: The Memphis VIVREMV2 can only be used with V2 versions of Memphis VIV amplifiers.
Operation: The VIVREMV2 wireless remote has a large 1-1/8" diameter rotary control that lets you adjust the output volume of the paired amplifier. It has a control range (attenuation) of 0dB to -26dB. When the remote is at maximum volume, the amplifier will be at the level set by the Gain Control. As you turn down the volume on the remote, the amplifier's level is attenuated. The rotary knob can be briefly pressed to mute the amplifier, and pressed again to un-mute. The VIVREMV2 uses EEPROM (electronic memory) to save the last volume setting when powering down, and will return to the same volume when powering up. You can clear the volume memory by pressing the button for 5 seconds, resetting the volume to MAX.
LED: The included LED will flash blue as you turn the volume up or down, and glow solid blue when the volume is set to Minimum or Maximum volume. When the amplifier goes into protection, the LED will glow solid red.
Power: The Memphis VIVREMV2 has a built-in rechargeable battery. The battery can be charged in 4 hours via the included USB type-C to type-A cable, and will provide approximately 3000 hours of battery life. You can also hardwire the VIVREMV2 to avoid having to charge the device. A USB type-C hardwire connection is included in the box.