About the Kenwood Excelon P-HD3FR
Kenwood Excelon sound for your Harley
Kenwood Excelon sound for your Harley
If you're ready to upgrade the sound on your 2014-up Harley-Davidson®, Kenwood has a solution. The Excelon P-HD3FR speaker and amp package features fairing and saddlebag speakers, plus two compact, powerful amplifiers. Designed specifically for select Road Glide and Street Glide models, this kit fits right into your Harley, and no flashing of the factory radio is required.
A pair of powerful amps
This package includes two 2-channel Kenwood Excelon XM160-2 amplifiers for big-time power. These compact Class D amps are built to handle life on the road, so you'll enjoy excellent performance no matter where your travels take you.
These amps are made to rock hard and run cool, even when tucked into a tight space. Plus, the high-efficiency design won't overload your motorcycle's electrical systems, and they'll work with your factory radio or any aftermarket receiver. You'll install these amps using the included mounting plates and Harley-specific wiring kit — no wire trimming or special modifications required.
Two sets of speakers
The package includes two Kenwood Excelon XM65F 6-1/2" speakers that fit right into the fairing locations on your Road Glide or Street Glide. These rugged coaxial speakers are a perfect match for this system's amp, so they'll really boost your bike's audio quality. The rugged, road-ready design will stand up to moisture and vibration.
For the saddlebags, there's a pair of Kenwood Excelon 6”x9” XM69R speakers, plus a pair of sharp-looking metal mesh grilles. These powerful speakers feature a sealed design that keeps water from passing through, plus silicone gaskets for extra protection. The package also includes a cut-in kit for the saddlebags.
Product highlights:
- system includes two 6-1/2" fairing speakers, two 6"x9" saddlebag speakers, two 2-channel amps, mounting plates, and an amp wiring kit
- designed for select 2014-up Harley-Davidson® Road Glide and Street Glide motorcycles
- no flashing required
Kenwood Excelon XM65F 6-/2" full-range speakers
- designed for your Harley's fairing speaker locations
- polypropylene woofer cones
- 1" PEI dome tweeters
- power handling: 150 watts RMS (300 watts peak)
- frequency response: 40-25,000Hz
- impedance: 2 ohms
- warranty: 2 years
Kenwood Excelon XM69R 6"x9" full-range speakers
- designed to fit your Harley's hardshell bags
- polypropylene woofer cones
- 1" PEI dome tweeters
- power handling: 200 watts RMS (400 watts peak)
- frequency response: 20-25,000Hz
- impedance: 2 ohms
- silicone gaskets included
- Kenwood CA-CUT14 cut-in kit included
- warranty: 2 years
Kenwood Excelon XM160-2 motorcycle 2-channel amplifiers (2)
- high-efficiency design works with Harley-Davidson electrical systems
- Class D amp technology
- 80 watts RMS x 2 (2 ohms)
- includes mounting plates and amplifier wiring kit
- warranty: 2 years
- MFR # P-HD3FR
What's in the box:
Kenwood Excelon P-HD3FR owner's manual
- This Kenwood Harley-Davidson bundle includes 5 individually boxed items:
- XM160-2 Amplifier (x2):
- 2-Channel amplifier with attached 6" speaker and 8" power/ground harnesses (inline 15A ATO fuse)
- Street Glide mounting plate (attached to amplifier)
- Road Glide mounting plate
- 5' Power & ground harness with inline 15A ATO fuse
- 17" Input/Bypass harness
- 21" Front output harness
- 6" Input Link harness
- Ten 6" wire ties
- 4 Star washers
- Instruction manual
- XM65F Front Speakers:
- Two 6.5" 2-way speakers
- 2 Gilles
- Instruction manual
- XM69R Rear Speakers:
- Two 2-way speakers
- Two 14+ silicon mounting gaskets
- Two 98-13 silicon mounting gaskets
- Instruction manual
- CA-CUT14 Saddlebag Kit:
- 2 Speaker adapters
- 2 Mounting frames
- 2 Grilles
- 4.5' Loomed dual-speaker cable (two 2-pin connectors on one end/ 4-pin plug on other end)
- Two 46" lengths of jacketed speaker wire with inline grommets (2-pin plug on one end/ slip-on terminals on other end)
- 2 Silicon gaskets
- 10 wire clamps with adhesive backing
- Twenty-four 1/2" screws
- 3 Rubber screw-bushings
- Fifteen 7.5" wire ties
- Instruction manual
Customer reviews for Kenwood Excelon P-HD3FR
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsCustomer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kenwood Excelon P-HD3FR
Product Research
Features
Amplifiers
Front Speakers
Rear Speakers
Rear Speaker Installation
Features
Compatibility: The Kenwood P-HD3FR Amplifier and Front & Rear Speaker package is designed specifically for installation in the following Harley-Davidson motorcycles:
Make | Model | Year | Chassis |
---|---|---|---|
Harley-Davidson | Street Glide | 2014-up | FLHX |
Limited Ultra | 2014-up | FLHTK | |
Ultra Classic | 2014-up | FLHTCU | |
Tri Glide Ultra | 2014-up | FLHTCUG | |
Road Glide | 2015-up | FLTR | |
Limited Road Glide Ultra | 2020-up | FLTRK | |
Road Glide Ultra | 2016-up | FLTRU | |
Electra Glide Standard Fairing (with factory radio installed) | 2018-up | FLHT |
Amplifiers
No Flashing Required: The two included Kenwood XM160-2 amplifiers are tuned for the best performance with a stock Harley-Davidson headunit, letting you install both amps without the need for flashing the factory radio.Power: The Kenwood XM160-2 amplifier can output 80W RMS (2Ω) x 2 channels.
Class D Design: The amplifier features a Class D design, which uses digital switching power supplies. The result is a more efficient amplifier, generating less heat than Class AB amps of equal power. The Class D design also allows the amplifier to be built on a small chassis, and installed where space is limited.
Signal Sensing: The amplifier has a signal-sensing turn-on circuit on the speaker level input. When a signal is detected on the speaker level inputs, the amplifier will automatically power on. When the signal is no longer detected, the amp will turn off. This allows you to install the amplifier without a remote turn-on lead.
Input Sensitivity Control: The XM160-2 features an Input Sensitivity control, letting you dial in the maximum headunit signal while keeping it below the distortion point.
Connections:
- Power & Ground: The amplifier features an attached 8" power & ground input harness consisting of 10-gauge wire terminated in a Molex plug. An additional 5' power & ground harness attaches to this and gets run to the vehicle battery. The amp's 8" power wire includes an inline 15A ATO fuse, and the 5' extension includes an additional inline 15A fuse for protection at the battery. The power and ground wires are terminated in 0.32" ring terminals.
- Speaker Level Input/Bypass: A 17" 8-pin harness provides the input channels, with connectors that plug directly into the factory radio output wiring. A 4-pin Bypass harness is attached, letting you jumper the input signal back out to additional amplifiers (sold separately) using the provided Input Link harness.
- Speaker Output: A 21" 4-pin output harness provides the connection to the Harley-Davidson factory front speaker wires.
Amplifier Mounting: Two amplifier mounting plates are provided with each amplifier, for Harley-Davidson Road Glide/Road Glide Ultra and Street Glide/Street Glide Ultra. Both brackets include pre-applied hook-and-loop fastener as well as on the amplifier, letting you easily attach/detach the amp to either mounting plate. The mounting plates use factory hardware for mounting.
Front Speakers
Front Speaker Integration: The Kenwood XM65F motorsports 6-1/2" speakers are designed for installation into select 2014-up Harley-Davidson Street Glide/Street Glide Ultra, Road Glide/Road Glide Ultra, and CVO Ultra motorcycles. The XM65F speakers mount into the factory front location using the factory mounting hardware and wiring. Replacement speaker grilles are provided.Construction: The XM65F speakers feature a 6-1/2" IMPP (Injection Molded Polypropylene) woofer cone and a coaxially-mounted 1" PEI (Poly-Ether-Imide) dome tweeter.
Rear Speakers
Saddlebag Speakers: The included Kenwood XM69R 6"x9" 2-way speakers are designed specifically for mounting into the hardshell saddlebag lids on select Harley-Davidson motorcycles. The XM69Rs feature IMPP (Injection-Molded Polypropylene) woofer cones with rubber surrounds and 1" PEI dome tweeters. The speakers feature a sealed design to prevent water ingress and include 2 pairs of silicon mounting gaskets. The 2-ohm speakers can handle up to 200 watts RMS (400W peak) and have a frequency response of 20Hz-25kHz.
Rear Speaker Installation
Saddlebag Installation Kit: The Kenwood CA-CUT14 6X9" Cut-In Lid Kit lets you install your 6x9" speakers into the hard saddlebag lids of select 2014-up Harley-Davidson motorcycles. The installation kit positions your speakers facing towards the rider for optimal sound projection. The CA-CUT14 minimizes bag space loss and features built-in water drain channels.
Note: Installation of the Kenwood CA-CUT14 kit will require modifications to your factory hard-shell saddlebags.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Sound is amazing, the whole kit comes anything and everything you could think of.. Just take your time on the install and you'll have nothing to worry about!!
Scott from San Antonio, TX