About the EFX PA10BX Wiring Kit
Get the right wire for your amp
Get the right wire for your amp
The PA10BX wiring kit from EFX will supply your car amplifier with the wiring necessary for receiving its signal and powering up. The 10-gauge power and ground cables ensure that your amp gets all the power it needs to play music at its full potential. The ground cable features EFX's Ultimate Ground Terminal, which attaches to your vehicle's chassis by way of 2 self-tapping screws (included) to make sure you get a tight and secure ground connection.
This wiring kit works with smaller amplifiers, with less than about 250 watts RMS of total output power. Please check your amplifier's installation instructions to confirm the proper size wire to use. The kit includes a stereo RCA patch cable, remote turn-on lead, in-line fuseholder, fuse, and an assortment of connectors and hardware to help with your amp's installation.
This wiring kit does not include speaker wires. You will need to purchase those separately, in order to complete your amplifier installation. This kit includes patch cables for a 2-channel or mono amp — you'll need to add cables for multi-channel amps.
Product highlights:
- amplifier wiring kit with power, ground, and audio connections
- 17-foot blue 10-gauge power cable
- 2-foot black 10-gauge ground cable with Ultimate Ground Terminal
- 17-foot blue remote turn-on lead
- 17-foot twisted pair RCA patch cable
- 30-amp fuse and in-line fuse holder
- 6 feet of flex loom
- assorted mounting screws, crimp-on connectors, and wire ties
- warranty: 90 days (no warranty on fuses)
- MFR # EFXPA10BX
What's in the box:
EFX PA10BX Wiring Kit owner's manual
- 17' Length of 10 AWG blue power wire with in-line waterproof fuse holder and ring terminal (30A ATC fuse installed)
- 2' Length of 10 AWG black ground wire with Ultimate Ground Terminal
- 17' Length of blue turn-on wire
- 17' Length of Core-Twisted RCA interconnect cable (2 male RCAs on each end)
- 6' Length of black 3/8" split loom tubing
- Spare 30A ATC fuse
- Firewall grommet
- 2 Spade terminals for 10 AWG wire (1 red/1 black)
- 1 Spade terminal for turn-on lead
- 1 Butt connector for turn-on lead
- 2 Sself-tapping screws (for Ultimate Ground Terminal)
- 6 Plastic cable ties (length=8")
- Instructions
Customer reviews for EFX PA10BX Wiring Kit
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsCustomer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the EFX PA10BX Wiring Kit
Product Research
Features
Compatibility: The PA10BX kit is designed for amplifiers with fuse ratings up to 30 amps.
Kit Contents: This amp wiring kit includes the following:
- Power/Ground/Remote wire: The power/ground wires use OFC
(oxygen-free copper) for high-current delivery. The wires use fine strands
of copper and soft-touch insulation for maximum flexibility.
- 17' length 10 AWG blue power wire with in-line waterproof fuse holder (30A ATC fuse installed) and a ring terminal (0.336" inside diameter, 0.55" outside diameter)
- 2' length 10 AWG black ground wire with patent-pending Ultimate Ground Terminal for reliable ground connections.
- 17' length of 18 AWG blue turn-on lead
- RCA Patch Cable: 17' Core-twisted stereo RCA interconnect cable with split-top center pin and segmented shield for maximum contact and connection reliability. Twisted pair construction gives you maximum noise rejection and better sound quality. The RCA plugs have a micro barrel design and integrated strain relief.
- Connectors: The kit
includes the following crimp-on terminals:
- Two 10-gauge crimp-on spade connectors (with 1 red and 1 black rubber insulator boot)
- One 18-gauge crimp-on spade connector with red plastic boot (for remote turn-on lead)
- One 18-gauge crimp-on butt connector (for remote turn-on lead)
- Mounting Accessories:
- 6' length of 3/8" diameter split loom to protect cables
- 2 Phillips-head self-tapping screws (for securing the Ultimate Ground Terminal)
- Plastic firewall grommet (0.25" inside diameter, 0.371" outside diameter)
- Six 8" plastic wire ties
- Spare 30A ATC fuse
- Instructions
The EFX PA10BX Wiring Kit replaces these items
EFX 10-gauge Amplifier Wiring Kit
- 10-gauge power and ground cables
- 17-foot stereo RCA patch cable
- fuse holder w/ 30-amp fuse
Loading...
Loading accessories...
Customer Q&A
3 questions already asked
Loading...
Loading articles...
Kit had everything but no fuses for the power lead, not really a big deal. But I called support to make sure what amp fuse to get. Support sent me a small package with multiple amp fuses, didn't have to ask. Thanks again crutchfield !!!
Matthew from Gainesville, FL