About the Infinity INF-BC4
Bluetooth control for outdoor vehicles
Bluetooth control for outdoor vehicles
You don't necessarily need a radio to enjoy some music on your ATV, side-by-side, golf cart, or small boat. This Bluetooth® controller from Infinity gives you maximum music with minimal hassle. Just pair your Bluetooth device, stash it in a safe place, connect the controller to your amp, and use it to control all basic audio functions.
Compact and uncomplicated
This compact, IPX6-rated waterproof controller is small enough to flush-mount in tight spaces (a 1-3/8" cutout is required) and the big central knob and big buttons are easy to handle, even when you're wearing gloves. Use the RCA outputs to connect it to any amplifier with RCA inputs.
Product highlights:
- made for ATV, UTV, golf cart, and marine use
- flush mounts in tight spaces (1-3/8" cutout required)
- built-in Bluetooth
- IPX6-rated waterproof
- large rotary dial and big buttons
- rear RCA connectors
- warranty: 1 year
- MFR # INFBC4
What's in the box:
Infinity INF-BC4 owner's manual
- Bluetooth pre-amp controller (attached 18" wiring harness with inline 2A fuse)
- Rubber gasket (pre-installed)
- Mounting collar (pre-installed)
- Operating Instructions
Customer reviews for Infinity INF-BC4
Loading...
Loading reviews...
Average review:
3.5 out of 5 starsCustomer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Infinity INF-BC4
Product Research
Features
Pre-Amp Bluetooth Controller: The INFBC4 Pre-Amp Bluetooth Controller adds wireless Bluetooth connectivity to your powersports or marine amplifier, allowing you to wirelessly stream audio from your smartphone or tablet to your powersports or marine stereo system. The INFBC4 connects to your external power amplifier via stereo RCA cables (sold separately).
IPX6-Rated Water Resistant: The INFBC4 Pre-Amp Bluetooth Controller is water resistant (IPX6-Rated) and can withstand powerful jets of water from any direction. It should not be submerged in water.
Bluetooth Audio Streaming: The INFBC4 Pre-Amp Bluetooth Controller allows you to wirelessly stream stored music, music apps, and other audio content from a Bluetooth source device (such as your iPhone/iPad or Android smartphone/tablet) to your connected powersports or marine amplifier system. You can only pair and connect one Bluetooth source device at a time.
Note: The INFBC4 does not support Bluetooth hands-free communication for answering and making phone calls.
Playback Controls: The INFBC4 features a 3-way rotary knob and three push buttons to control your Bluetooth audio. The 3-way rotary knob allow you to adjust the Volume level up or down, as well as power the unit On or Off. A beep tone indicate the volume level has reached maximum or minimum level. The three push-buttons provide control over Play/Pause, Previous Track, and Next Track.
Mounting Options: The INFBC4 Pre-Amp Bluetooth Controller can be mounted on an ATV, UTV, golf cart, or boat. It mounts flush in the dash and requires a round cutout (see cut-out dimensions below). It secures to the dash using included rubber gasket and mounting collar.
- Cut-Out Dimensions: 1.375" (diameter) x 2.5" (deep)
- Front-Panel Dimensions: 2.25" (w) x 2.25" (h) x 1.125" (d)
- Overall Dimensions: 2.25" (w) x 2.25" (h) x 3.625" (d)
Connections: The INFBC4 Pre-Amp Bluetooth Controller is equipped with a set of female stereo RCA output jacks on an 18" pigtail to connect an external power amplifier (stereo RCA cables sold separately). It also features an 18" wiring harness with Power (red), Ground (black), Remote Out (blue), and Remote In (purple/white) leads. The Power wire features an line fuse-holder with a 2A fuse. The Remote Out provides a constant 12V power supply. The Remote In wire allows the INFBC4 to be powered on/off by an external remote control.
Loading...
Loading accessories...
Customer Q&A
14 questions already asked
Loading...
Loading articles...