Skip Navigation

A pontoon boat gets a serious stereo upgrade

This party barge is ready for summertime fun

In a nutshell: Thinking about upgrading the stereo in your pontoon boat? This article gives you an inside look at a recent installation we did right here in our parking lot.

We installed a marine-rated receiver, full-range speakers, tweeters, a subwoofer, and a 6-channel amp in this Sylvan. And we added a chartplotter, too. The job had its challenges, but the results were absolutely amazing. Want to lean more? Read on....

We're big fans of pontoon boats around here. We like being outdoors, we like relaxing, we like hanging out with friends, and we like the water, so what could be better than a sunny afternoon on a party barge?

Well, definitely not a cold, gray afternoon (several, actually) upgrading the stereo gear on a party barge, but hey, it wasn't snowing (much), so there's that.

This Sylvan Mirage 8520 belongs to our friend Tim, and it's is a big part of his family's summertime fun. The stock stereo, however, was no fun at all, so he really wanted to get that fixed in time for boating season. Cold weather or not, we were happy to help.

Receiver in boat

A new receiver and a pair of tweeters help the functionality and sound, while a chartplotter will come in handy when Tim's out fishing.

While this pontoon boat is a very impressive vessel in most respects, the stock sound system was definitely not getting the job done. The Infinity receiver was pretty nifty, but the speakers were small, weak, and mounted below the seats, so they sounded muffled and weird. Bringing this system up to our standards (and Tim's) took some work, but wow, were the results worth it. This pontoon boat is easily one of the most transformational, rewarding installations we've done in a while.

Receiver install

We needed more preamp outputs for the system, so we replaced the original Infinity receiver. The new one fit right into the stock opening.

Replacing the receiver

The stock receiver wasn't bad, but we needed a marine receiver with more functionality and more preamp outputs for this system. We chose Infinity's INFPRV450 digital media receiver because it has three sets of preamp outputs. We added an Infinity INFMC30 color wired remote that's mounted just below the rear swim deck.

With built-in Bluetooth connectivity®, Tim will be able to cue up music using his smartphone or a music player, which means there's no need for a bulky box of CDs. The INFPRV450 is also compatible with SiriusXM tuner (sold separately) and, while there isn't one on this boat, NMEA 2000 systems. Check out our informative article if you want to learn more about NMEA 2000.

More info about the products:

Infinity INFPRV450 marine digital media receiver

Infinity INFMC30 color wired remote for INFPRV350/450 

Garmin echoMAP Plus 73SV

The Garmin echoMAP Plus 73SV can be mounted in or on your boat's dash

Adding a chartplotter for fishing days

Tim enjoys fishing when he takes his boat out on Virginia's Smith Mountain Lake, so we also installed a chartplotter. Garmin's echoMAP CHIRP 73sv provides a clear view of the fish, thanks to Garmin CHIRP SideVü and CHIRP ClearVü sonar. It comes preloaded with over 17,000 U.S. lakes, rivers and reservoirs, and it's also fully compatible with NMEA 2000 networks.

We had to create a space for the chartplotter in the console. Thankfully, the Sylvan had a very useful space in the center of the dash. We measured twice (always), used a template to draw the opening, then used a rotary tool to cut the opening into the dash plastic. We ran the transducer cable down the starboard side, along the top of the pontoon. The transducer itself was mounted on a factory bracket.

More details about the Garmin echoMAP CHIRP 73sv chartplotter.

JL audio marine speaker install

The old speakers (on the deck) were pretty weak. The new JL Audio speakers sound great and they also have built-in LED lighting.

Installing new main speakers

As we said earlier, the stock speaker situation was less than ideal. In fact, the helm was kind of an audio dead zone where only one speaker was actually audible. Bad sound is bad sound, especially when you're only hearing 25% of it.

We couldn't do much about the speaker locations, but we could install bigger, better marine speakers. We chose a quartet of 7.7" JL Audio full-range speakers, and they did the job quite nicely. We used a rotary tool to enlarge the openings, then lined the protective speaker covers inside the storage cubbies with sound deadening material. And, of course, we used plenty of marine-rated speaker wire.

Besides sounding awesome, these speakers also have built-in LED lighting that brightens up any nighttime cruise. The subtle blue glow really looks cool, and it's also helpful for people moving around the boat.

More info about the products:

JL Audio MX770-CCX-SG-WLD-B 7.7" marine speakers with LEDs

JL Audio XM-WHTSC16-500, 16 AWG marine speaker cable

Tweeter installation

Tip: when drilling or cutting fiberglass, use painter's tape to help prevent splintering. 

Raising the soundstage with a set of tweeters

The new speakers have enough power to overcome the dead zone, but they also have to compete with wind, water, and engine noise. We wanted to do more to make sure the captain got to enjoy some music, too.

A pair of 1" JL Audio marine tweeters mounted in sleek enclosures on either side of the cockpit brought the soundstage off the floor and handled the highs beautifully. Once we got the placement and the measurements just right, mounting them and wiring them to the amp (see below) was actually pretty easy. The improvement to the sound staging was seriously impressive.

These tweeters are out in the elements, but the marine-rated speaker design and the rugged enclosures will protect them from moisture and damage.

More details about the products:

JL Audio M100-CT-SG-WH  marine tweeters

JL Audio MTPOD-M100--CL aluminum tweeter pods

Amp and sub

The Sylvan's storage cubby makes a great home for a 10" subwoofer and a 6-channel amplifier. There's plenty of space left for gear, too.

Boosting the bass with a subwoofer

This Sylvan features a spacious storage cubby beneath the helm, so we took full advantage and installed a 10" JL Audio marine subwoofer mounted in a waterproof fiberglass enclosure. The box is finished in a durable black gelcoat, while the 10" driver is designed to stand up to moisture and heat.

The subwoofer box is not drilled for speaker cable, which is actually a good thing, because it gives the installer a lot more flexibility for positioning the sub. Once you know where and how you want to install it, you can do the drilling, wiring, and sealing.

More details about the subwoofer:

JL Audio FS110-W5-SG-TB 10" marine subwoofer and box

Amp installation

Peter came up with this neat and tidy amp installation. It looks terrific, and the marine-rated wiring will stand up to life on the water

Powering it all with a new amplifier

We powered this system with JL Audio's M600/6 marine amplifier, neatly mounted on a board that's also secured in the storage cubby. This compact (less than 11" wide) Class D amp can deliver up to 100 watts from each of its six channels with excellent efficiency and very low distortion. In our set-up, it's running 75 x 4 and 200 x 1.

We used a marine-rated JL Audio amp wiring kit that's made to handle big power and also the big weather extremes of life on the water. This kit includes the circuit breaker, power and ground wires, and a 20-foot remote turn-on wire. You can choose from 10' or 20' versions.

Installing an amp is kind of a must on a marine stereo system like this, but even smaller systems can benefit from a little more oomph. Adding a marine-rated amp brings more to your boat than just volume – you'll also hear details. Instead of losing your tunes to wind and engine noise, you'll hear them the way they're supposed to sound.

More info about the amp gear:

JL Audio M600/6 6-channel marine amplifier

JL Audio marine amp wiring kit

Sound check

Matt tests the sound pressure levels while Jon and Peter practice the gentlemanly art of "standing around looking concerned."

Testing the new sound system

We’re not easily impressed, but we were absolutey blown away by how much better this boat sounded with all the new gear. The sound was big, detailed, and bright. And bright is good in the noisy marine environment. The dreaded dead spot was gone. 

Just to make sure our ears (which were pretty cold by the time we finished up) didn't deceive us, we took sound pressure level measurements before and after the installation to see how much more volume we'd added. Quite a bit, as it turned out. The stock system hit 93 dB before it began to distort. The new stuff reached over 100 dB without any distortion at all. That's a massive improvement!

Marine install

Our hard-working marine stereo installation team. And their touring drummer.

You're on a boat...

And you're ready to build you own marine stereo system. We can help with that. Click on any of the links above and start choosing the gear that's right for your vessel. From kayaks to cabin cruisers, our Marine Audio & GPS section has everything you need to build the system you want. If you have any questions, just give us a call or chat. Our experts are ready to help.

  • Jon Paulette from Crutchfield

    Posted on 4/23/2018

    Jay, Congrats on the new boat! Here are the answers to your questions, straight from our marine installation team: Q. Did you run amp directly to the boat's battery (power and ground)? A. Yes, using the JL Audio 20-it amp kit. It was a bit longer than we needed, but better to have extra! We ran the power wire down the main grommet, along the top of the pontoon (an existing wire trace), and back up through the grommet in battery compartment. Q. Does the boat have a second battery? A. That model did not. Q. If not, are there any concerns with draining the power? A. Underway? No. But if/when the engine is off, be sure to monitor reserve power. We also offer marine-rated jump packs, and dockside battery chargers. Q. How did you stabilize the sub from moving around in the compartment? A. We actually didn't finish that part. The owner wanted the sub installed, but not secured. He had some storage decisions to make and he also wanted to tweak the sound before securing it for good. The sub requires some drilling to secure it. Basically, you remove the sub, drill mounting holes in the bottom, and run screws or bolts through the bottom to the mounting surface (in this case, the plywood deck of the boat). Q. How did you mount the board the amp is mounted on to the boat? A. The owner's plan was to secure the amp board in the small starboard space under console. Securing it will require shorter screws that go into the fiberglass without punching through the outs

  • Jay Rush from Commerce City

    Posted on 4/20/2018

    Really good write up! Funny I came across this while shopping for my exact same boat. I have a few questions with the install: Did you run amp directly to the boat's battery (power and ground)? Does the boat have a second battery? If not are there any concerns with draining the power? How did you stabilize the sub from moving around in the compartment? How did you mount the board the amp is mounted on to the boat? Any other pics of the install?

Ask an expert advisor

No pressure, no commission — just lots of good advice from our highly trained staff.

Find what fits your vehicle

 
 
 
 

Can't find your exact vehicle?

Featured Products