Chat
Contact us
Close contact box
Connect ID #
674 945 59
Connect ID #
674 945 59

Sorry, chat is currently unavailable

Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Crutchfield Reference 4-Channel RCA Patch Cables Available in 2 different lengths (17-foot)

Item # 007CMER417

Crutchfield's Reference RCA cables let all the music flow free and easy between source and amp with no noise or...

Crutchfield's Reference RCA cables let all the music flow free and easy between source and amp with no noise or...

Item # 007CMER417

Ships free

Temporarily out of stock
C$41.99

Other options

About the Crutchfield Reference 4-Channel RCA Patch Cables

Buck Pomerantz

Make a premium Crutchfield connection

Crutchfield's Reference RCA cables let all the music flow free and easy between source and amp with no noise or interference to spoil the sound. Double twisted pair construction and pure copper stranded wire conductors ensure balanced frequency response, low resistance, and pure signal clarity

Make a premium Crutchfield connection

Crutchfield's Reference RCA cables let all the music flow free and easy between source and amp with no noise or interference to spoil the sound. Double twisted pair construction and pure copper stranded wire conductors ensure balanced frequency response, low resistance, and pure signal clarity

Construction

A tough, black and blue nylon mesh braided jacket protects the wires within and flexes easily to bend around obstacles in an installation. The RCA connectors feature nickel-coated, split-tip, centre-pin conductors made from machined brass that hold themselves tightly in position. Each zinc alloy shell sports a satin chrome finish stamped with the Crutchfield logo, so you'll be sure this cable will take good care of your music.

CTA-2015 compliant

Crutchfield wire

Crutchfield wire is made of oxygen-free copper, with no impurities that could raise its resistance to a signal's flow or add interference. Crutchfield wire meets all American National Standards Institute (ANSI) and Consumer Electronics Association (CEA) standards for size, resistance, and insulation quality. Warranty: 1 year.

READ LESS

What's in the box:

  • 17' Four-channel RCA cable
MFR #CMER417

Customer reviews for Crutchfield Reference 4-Channel RCA Patch Cables

Loading reviews...

Average review:

5.0 out of 5 stars
129 reviews

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Crutchfield Reference 4-Channel RCA Patch Cables

Mark G.

Product Research

Features & Dimensions

Crutchfield Reference RCA Cable: The Crutchfield Reference 4-channel RCA cable features a four-into-one cable design with a flexible braided jacket for easier installation.

  • Connector Type: Male RCA (six-split tip)
  • Connector Dimensions: 0.535" (diameter), 1.5625" (length)
  • Cable Diameter: 0.165" (inner cable), 0.275" (outer cable)
  • Lengths: available in 12 and 17 ft lengths

Loading accessories...

Customer Q&A

5 questions already asked

Q
What is minimum bend radius of the individual RCA cables (not the bundle of 6)? Trying to figure out how close from amp female inputs the cables can be routed.
blake  Dec 06, 2021
1 answer
A
We have not tested them to know the minimum bend radius of the cable. We do recommend not going under 1" radius on a installation and try to avoid coiling the cable.
jason  Dec 11, 2021 (Staff)
Q
Iâ??m trying to install the JL Audio MBT-RX receiver to an Alpine KTA 450. Which RCA adaptors are required and which speaker level inputs connects to which receiver outputs after switching switch #6 on the KTA 450 amp for the RCA setting?
jerry  Nov 19, 2023
1 answer
A
I would be happy to help, Jerry. The JL Audio MBT-RX marine Bluetooth adapter has a single set of RCA outputs. You will need two of the Fusion MS-RCAYM marine rated y-splitters in the link below to connect to the four RCA inputs on the Alpine KTA-450 powerpack's input harness. You will not use the speaker level input function on the amp, and you will connect your speakers to the powered speaker output wires. https://www.crutchfield.com/p_917MSRCAYM/Fusion-MS-RCAYM-Female-to-dual-male.html
bo  Nov 19, 2023 (Staff)
Q
Are these good for car audio or home?
christopher  Aug 31, 2019
4 answers
A
They worked perfect in my 1996 BMW 740iL and there still working since 2017
david  Sep 01, 2019
A
They can be used for either card audio or home audio.
herman  Sep 01, 2019
A
I used this cable to run the front and rear signal from my car Receiver to my 4 channel amp in the trunk. You could use them in a home audio setup, but the cable is 17ft long, so you'll more than likely be dealing with excess cable to hide.
toby  Sep 01, 2019
A
These are high quality rca cables. They would work for home or car audio. The 4 channel cables are convenient for 4 channel car applications. I purchased for car audio.
jon e.  Aug 31, 2019
Q
My plan is to run these off my Factory radio. Cutting the one side of RCA's off. And splicing into the output of the Hyundai radio. Then run an amplifier into the factory harness. The amps I am considering use Speaker Level through RCA connection. Could you tell me which wire is Pos and which are Grounds?
chris  Feb 20, 2017
5 answers
A
I had to do this for my back up camera because it wasn't factory and it had an s video plug but found out that not all are same so I had to do some research to find exact wires....personally I would put rca Jacks on amp that can be done also
jeff  Feb 21, 2017
A
RCA cables do not work like that. They carry the entire channel signal to the amp. You can not tie them to speaker output from the head unit and put that unto the unput of the amp. In order to use speaker output from a factory head unit you need an amplifier with specific speaker line unputs. NOT RCA input.
michael  Feb 21, 2017
A
There are better ways to wire an amp into a factory stereo. These cables are pretty nice. They are also large diameter if I recall. I'm not sure they would splice in all that easily. Regardless, they are not positive or negative until you physically connect them to something positive or negative. Talk to one of the CF pros and they can put you on the right path!
stuart  Feb 21, 2017
A
I would recommend getting good components one by one as you can afford them. You want a receiver with 6 channel outputs for easy installation and compatibility with the stuff you are going to want later. I found the kenwood exceleon amp on scratch and dent for a bunch less and it works. So if you keep your eye out you can find good stuff for cheap.
kevin  Feb 20, 2017
A
Red is pos. Other color is neg. Red is always pos black is usually neg. If it is red and white white is neg or black is neg. If cables are red and black
erick  Feb 20, 2017
SHOW MORESHOW LESS

Loading articles...

Compare the sound