About the Posi-Products™ Wire Connectors
Posi-Tap™ connectors tap into hot leads without cutting them. Just insert wire to be tapped into the large cap and hand tighten into the barrel. The conductor point pierces the tapped wire without compromising its conductive integrity. Insert stripped wires through the small cap, then tighten for an unprecedented multiple hookup using only one connector.
This package contains 6 tap connectors for tapping into 16- to 18-gauge wires for 18- to 24-gauge accessory wiring. Warranty: 60 days.
What's in the box:
Posi-Products™ Wire Connectors owner's manual
- 6 Blue Posi-Tap connectors
Customer reviews for Posi-Products™ Wire Connectors
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsCustomer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Posi-Products™ Wire Connectors
Product Research
Features
Overview: This connector kit comes with 6 Posi-Tap tap connectors. Posi-Tap connectors allow you to tap into wires without cutting or stripping them. Each connector has a tapered design and a threaded cap on each end. Just insert wire to be tapped into the large cap (this is the Tap end) and hand tighten into the barrel. The conductor point pierces the tapped wire without compromising its conductive integrity. Insert the stripped wire through the small cap (this is the Accessory end), then tighten. An internal conductor runs the length of the Posi-Tap, giving you a solid electrical connection. The Posi-Tap connectors are vibration proof, fully insulated, and reusable.
Note: If multiple wires are inserted into the accessory cap, the stripped wire ends should be twisted together.
Dimensions:
- Posi-Tap Connectors: compatible
with 14-16 gauge wire on the Tap end and 18-24 gauge wire on
the Accessory end
- Length: 1.25"
- Maximum Diameter: 0.385"
- Width of Slot in Large Cap (Tap end): 0.1"
- Diameter of Hole in Small Cap (Accessory end): 0.15"
Loading...
Loading accessories...
Customer Q&A
6 questions already asked
Loading...
Loading articles...
This is a very clean and strong splice connection that appears to be less likely to cut through tiny gauge wires than other splicers. The only downside is the creation of a bulky perpendicular attachment when you want it to lay down nicely with a bundle of other wires.
ALEXANDER from PORTLAND, OR