About the Kicker 48VCWR122
A match made in heaven...or Oklahoma
A match made in heaven...or Oklahoma
Kicker's 48DCWR122 loaded enclosure puts a thumping 12" CompR sub behind your music. The rugged ported box was designed specifically for the sub, so you can count on getting maximum performance, no matter what kind of tunes you enjoy.
Hard-hitting CompR sub
The 12” CompR subwoofer features a tough, polypropylene cone that stays rigid during intense play sessions so you hear accurate bass. A custom-designed back and top plate give the woofer plenty of room to travel, while the durable rubber surround helps to control cone movement during a heavy workout. The sub uses extensive venting in its heavy steel basket to shrug off heat, so you can count on reliable performance.
Heavy-duty enclosure
Sturdy MDF construction ensures long-lasting performance from the enclosure, and the specially designed front-facing port enhances bass production without getting sloppy. The enclosure's 2-ohm impedance draws maximum power from your mono amplifier. This Kicker will handle up to 500 watts RMS, so make sure you pick an amp that'll make that CompR sub happy.
Product highlights:
- ported enclosure with one 12" CompR subwoofer
- injection-molded polypropylene cone
- 3/4" medium-density fiberboard construction covered with black carpet
- 2-ohm total impedance
- power handling: 500 watts RMS (1000 watts peak power)
- frequency response: 25-500 Hz
- sensitivity: 90.8 dB
- dimensions: 23"W x 16"H x 14.5"D1 x 11.5"D2
- warranty: 1 year
- MFR # 48VCWR122
What's in the box:
Kicker 48VCWR122 owner's manual
- Ported enclosure loaded with one 12" Subwoofer
- 4 Mounting brackets
- Four 1" Pan head screws
- Eight 3/4" Flat head screws
- Specification chart
Customer reviews for Kicker 48VCWR122
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsCustomer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kicker 48VCWR122
Features & specs
| General | ||
|---|---|---|
| Woofer Size (inches) | 12 | |
| Speakers Per Box | 1 | |
| Woofer Material | IMPP | |
| Enclosure Type | Ported | |
| Color | Black | |
| Pieces in System | 1 | |
| Width (inches) | 23 | |
| Height (inches) | 16 | |
| Depth (inches) | 14-1/2 | |
| Connector Type | Spring posts | |
| Frequency Response | 25-500 Hz | |
| Power Range (Watts RMS) | 500 | |
| Maximum Wattage | 1000 | |
| Sensitivity | 90.8 dB | |
| Impedance | 2 ohms | |
| Parts Warranty | 1 Year | |
| Labor Warranty | 1 Year | |
Product Research
Features
Woofers: The Kicker 48VCWR122 enclosure uses one 12" CompR series subwoofer. The Kicker subwoofer features a polypropylene cone with a Santoprene surround. The surround and cone are attached using Kicker's signature red double stitching, providing an outstanding bond.
Enclosure: The ported enclosure is made of heavy-duty MDF (Medium Density Fiberboard) with extensive internal bracing, providing exceptional acoustic efficiency and deep powerful bass. The enclosure is covered in sleek black carpeting for added protection and a refined look.
Forced Air Cooling: Kicker uses their SoloKon technology to join the cone to the vented back brace, creating a single integrated unit. This forces air through the motor assembly allowing it to run 25% cooler and helping eliminate distortion.
Speaker Terminals: A single pair of spring posts are mounted on the back of the enclosure (toward the right side) and will accept pin connectors, single banana plugs, or bare wire up to 10 gauge.
Power: The single 2Ω CompR subwoofer can handle up to 500W RMS (1000W peak).
Break-in Period: Due to the complex nature of Kicker CompR speakers, they require a break-in period in order to produce optimum low-bass response. The suspension system is very stiff out-of-the-box. Approximately two weeks of daily playing will allow the suspension to break-in and reach its optimum equilibrium. Once broken-in, the subwoofer will exhibit stronger bass performance, smoother response, and greater low-bass extension.
The Kicker 48VCWR122 replaces these items
Kicker 43VCWR122
- 3/4" medium-density fiberboard construction covered with carpet
- 2-ohm total impedance
- power handling: 500 watts RMS (1000 watts peak power)
Loading...
Loading accessories...
Customer Q&A
6 questions already asked
Loading...
Loading articles...
I'm still breaking it in, But so far the bass is incredible!! Even at Break in levels my rear view mirror is barely usable & it booms the entire car!!! I'm using a 5ch. Pioneer GM-DX975 with dedicated sub channel & this sub definitely puts the funk in da trunk!!!
Charles from PITTSBURGH, PA