About the Kicker PK8
This wiring kit does not include speaker wire or patch cables. You will need to purchase those separately, in order to complete your amplifier installation.
This kit delivers all the power your amp needs
Your amplifier needs hefty power and ground wiring in order to deliver the big power you want. Kicker's PK8 8-gauge power wiring kit includes the basic power, ground, and turn-on wiring for any amplifier with a fuse rating of up to 60 amperes. The kit is suitable for an amplifier with a total maximum output of about 400 watts RMS for a Class AB amp or about 600 watts RMS for a Class D amp. Kicker makes all their wires from oxygen-free copper so you can count on maximum power and signal transfer with minimum resistance or interference.
Product highlights:
- amplifier wiring kit
- cables meet or exceed the American Wire Gauge specifications and requirements
- 17 feet of 8-gauge power cable with attached ring terminal and protective wire loom blue
- 2 feet of 8-gauge ground cable with attached ring terminal gray
- 17 feet of 16-gauge turn-on lead wire clear
- AFS fuse holder and 60-amp fuse
- assortment of installation hardware and cable ties
- extends your Kicker amplifier's warranty by one year, if purchased along with the amp
- warranty: 1 year
- MFR # PK8
What's in the box:
- 17' Length of 8-gauge power wire terminated with a 5/16" ring-terminal on one end (blue/black jacket)
- 2' Length of 8-gauge ground wire terminated with a 5/16" ring-terminal on one end (dark gray jacket)
- 17' Length of 16-gauge remote turn-on wire (clear jacket)
- AFS fuse holder
- 60 amp AFS fuse (installed)
- One 7/8" Self-tapping screw (ground)
- 1 Flat washer
- 1 Plastic grommet
- 1 Red butt-connector
- Six 5" wire ties
Featured video:
Customer reviews for Kicker PK8
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsCustomer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kicker PK8
Product Research
Features
Single Amplifier 8-AWG Kit: This kit includes the following:
- One 17' length of 8-gauge power wire (terminated by a 1/2" wide, 5/16" diameter ring-terminal)
- One 2' length of 8-gauge ground wire (terminated by a 1/2" wide, 5/16" diameter ring-terminal)
- One 17' length of 16-gauge remote turn-on lead
- AFS fuse holder
- 60A AFS fuse (installed)
- One 7/8" self-tapping ground screw with flat washer
- One plastic grommet
- Six 5" wire ties
- One red butt-connector
Hyper-Flex Power Cable: The power and ground cables feature a Hyper-Flex jacket for easy installation. Four feet of the power wire is covered with a wire loom to protect it in the engine compartment.
Silver Tinned OFC Copper: The power and ground cables are constructed of 735 strand silver tinned OFC copper.
Fuse Holder: The fuse holder requires a 5mm Allen wrench to secure the input and output wires, and to change the fuse. There are four holes in the base for mounting and the dimensions are approximately:
- Width: 3-1/2"
- Height: 1-3/8"
- Depth: 1-5/8"
The Kicker PK8 replaces these items
Kicker 09PK8
- 8-gauge power and ground cables
- turn-on lead
- fuse holder w/50-amp fuse
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...
Always excellent products from kicker
Bobby from Butler, KY