About the Kicker 43CST20
Bring your highs to life
Bring your highs to life
Is your speaker system sounding a little dull? Kicker's 41CST204 tweeters bring a new level of detail to your sound, whether you're doing a custom installation or just replacing your factory tweeters. Kicker includes all the hardware you need to flush-, surface-, or angle-mount these 3/4" tweeters. External crossovers, which send the appropriate frequencies to your tweeters, are also included.
Good power handling
These high-quality titanium domes will deliver crisp, clean highs, and they handle up to 50 watts RMS, so you'll really be able to make your system sing.
Installation note: You'll need a pair of our universal backstraps to install these tweeters in the factory locations.
Product highlights:
- two 3/4" titanium dome tweeters
- flush-, surface-, and angled-mounting hardware included
- external passive high-pass crossover included (6 dB per octave at 4,500Hz)
- power handling: 2-50 watts RMS (100 watts peak power)
- frequency response: 4,500-21,000 Hz
- sensitivity: 92 dB
- top-mount depth: 9/16"
- grilles included
- warranty: 1 year
- MFR # 43CST204
What's in the box:
- Two tweeters (each with 8" Wire attached)
- Two 41" Lengths of speaker wire with in-line crossovers
- 2 Flush mount tweeter rings
- 2 Short tweeter mounting nuts
- 2 Long tweeter mounting nuts
- 2 Back angled tweeter rings
- 2 Front angled tweeter rings
- 2 Angled surface mount tweeter housings
- Two 5/8" Screws
- 4 Red plastic wire caps
- Owner's manual (English/ Spanish/ German/ French)
Customer reviews for Kicker 43CST20
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsCustomer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kicker 43CST20
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 1-way | |
Tweeter Design | 3/4" Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Titanium | |
Woofer Composition | --- | |
Woofer Surround | --- | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 92 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 4500 - 21k Hz | |
Minimum RMS Wattage | --- | |
Maximum RMS Wattage | 50 | |
Peak Power Handling (Watts) | 100 | |
Top-mount Depth (Inches) | 0 9/16 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 1 5/8 | |
Mounting Height (Inches) | 0.214 | |
Frame Width | 1.975 | |
Frame Length | 1.975 |
Product Research
Features
Mounting Options: The tweeters come with brackets to allow multiple mounting configurations: flush-mounted, angled flush-mounted (approximately 10°), and angled surface-mounted (approximately 15°).
Dimensions:
Flush Mount | Angled Flush Mount | Angled Surface Mount | |
---|---|---|---|
Mounting Height | 0.214" | 0.6" | 1.16" |
Depth | 0.55" | 0.47" | 0.554" (screw depth) |
Frame Diameter | 1.975" | 1.975" | N/A |
Cutout Diameter | 1.564" | 1.58" | N/A |
Frame Width | N/A | N/A | 1.735" |
Frame Length | N/A | N/A | 1.885" |
Crossovers: The crossovers are wired in-line with the included speaker wire. The slope is 6dB per octave and the crossover point is 4500 Hz. Each crossover's output wires have quick slide terminals that mate to the terminals on the tweeter wires. At the largest point, the crossovers measure approximately 7/8" across.
The Kicker 43CST20 replaces these items
Kicker 41CST204
- two 3/4" titanium dome tweeters with neodymium magnets
- flush-, surface-, and angled-mounting hardware included
- power handling: 2-50 watts RMS (100 watts peak power)
Loading...
Loading accessories...
Customer Q&A
6 questions already asked
Loading...
Loading articles...
Tweeters look and work great. They did not fit in factory location without fabricating a mounting bracket. I cut the hole in the dash grille and flush mounted. They run parallel off my door speakers all running off head unit power and they sound great. Major upgrade over oem.
Chad from Oklahoma City, OK