Universal DIN Pocket

Fit right in to the space where my old separate CD player was..faceplate matched up too

Have questions for
?

Crutchfield response on

Universal DIN Pocket

Fills the void left by the removal of the factory CD player in my 95 Mustang.

Have questions for
?

Crutchfield response on

fits perfect!

This filled in the hole left when removing the factory CD from the 1998 Mustang, when I replaced the factory system with a single DIN radio. Fit perfectly!

Have questions for
?

Crutchfield response on

Pick up install

I had herd of Crutchfields, but never used them. I have now bought to sound systems from them in a month, partly because of the included install kits the include with the purchase. This kit made the install smooth easy and hassle free

Have questions for
?

Crutchfield response on

Universal DIN Pocket

This is great in that it fills space from the OEM model and it creates a little pocket above the radio which is quite handy. It wasn't quite made for the 2003 Suzuki Aerio model we had so we had to make some modifications to the dash cover and forego using the face plate on the pocket.

Have questions for
?

Crutchfield response on

My Volvo Install

This actually worked better than I expected. I replaced a double DIN factory head unit with a single DIN unit and this pocket. Initially, I had the head unit in bottom, and the pocket up top. Couldn't get it to snap into place and stay. I found the head unit too low, so I swapped places. When I pulled the pocket out, the mounting 'ears' fell off. I had broken off the middle 'tooth' of the 'ears', according to instructions for Volvo. I put a dab of hot glue on the 'ears', let it dry, and then stuck the pocket back in the hole. Eureka! It snapped solidly in place, and can only be removed by prying with a screwdriver. Great place to stick my sunglasses, phone, wallet, whatever...

Have questions for
?

Crutchfield response on

Universal DIN Pocket

Works nice!

Have questions for
?

Crutchfield response on

Universal DIN Pocket

only used to fill in where cd player used to be and it is loose in the hole

Have questions for
?

Crutchfield response on

Universal DIN Pocket

Good fill in for CD player hole in 1994 Mustang.

Have questions for
?

Crutchfield response on

Universal DIN Pocket

This gets 0 it did not fit I had to customize a lot not happy

Have questions for
?

Crutchfield response on

Universal DIN Pocket

Cheap junk. Went to put face plate on to install and the pins that hold faceplate snapped off. Now the bin is worthless. Waste of money. Happened to two that would possibly fit. The other is too small and off no use anyway. If I could give negative stars, I would

Have questions for
?

Crutchfield response on 2/4/2020

Once we saw this review, our Customer Support specialist, River, sent this customer a replacement pocket. If you encounter a problem with anything you purchase from Crutchfield, it's important to contact our Customer Support or Tech Support teams right away.

Universal DIN Pocket

I thought it would be flimsy due to snapping together but not the case. Just follow the instructions and it goes in great and quite solid.

Have questions for
?

Crutchfield response on

Saved the day!

The universal DIN Pocket was perfect. I didn't realize it came with the receiver, nice!. I was thinking about ordering one to have space for storage, now I don't have to.

Have questions for
?

Crutchfield response on

Universal DIN Pocket

Does exactly what it says it will do which is fill in a din sized space with a pocket for storage. Only reason for four starts and not 5 is I wish the mounts were not made of plastic. I used this in my boat and I am hoping the plastic will hold up. So far so good but it has only been about two weeks.

Have questions for
?

Crutchfield response on

Universal DIN Pocket

Works good, is lose and rattles if I "clip" it all the way in. I clipped one side in and the other side about halfway in and it holds steady. Easier to figure out without the instructions.

Have questions for
?

Crutchfield response on

Worked great

This worked great. Replaced the useless CD player with storage for my phone. The instructions were not great but I figured it out.

Have questions for
?

Crutchfield response on

Universal DIN Pocket

I own a 1999 SVT cobra Mustang I got this product to go with the new CD player that I put in my car since the stock cobra Dash has the radio and CD player separate I needed something to go over the old CD player went Since my Mustang does not have very many places to store things this is a perfect addition to go below my new deck it was my wallet my remote control for my new deck and my cell phones product is a great fit and very stable it also matches my existing dash perfectly

Have questions for
?

Crutchfield response on

Universal DIN Pocket

Perfect fit

Have questions for
?

Crutchfield response on

Bad fit

The extra pocket did not fit tightly and would fall out whIle driving. This was on a 1996 Mustang. Hopefully fits other applications better. I ended up getting an oem one.

Have questions for
?

Crutchfield response on

Worked for my application.

I was able to use this to eliminate the 6 disk changer in my 05 escalade. I had to rig the retainer clips in place but it worked perfect. Note: I didn't glue any thing to the vehicle just the side pieces of the kit to the pocke it self for strength.

Have questions for
?

Crutchfield response on

Great little pocket

Easy to assemble, fit right in

Have questions for
?

Crutchfield response on

Universal DIN Pocket

Pocket works under the new head unit. It is a little loose in the hole but seems to hold ok. The car is loud enough so that you can't really heat any rattling! Lol

Have questions for
?

Crutchfield response on

Universal DIN Pocket

fit good a good buy to fill in the empty space

Have questions for
?

Crutchfield response on

Universal DIN Pocket

Decent quality but it was free

Have questions for
?

Crutchfield response on

Very versatile

I wanted to replace the aftermarket head unit in my motorcycle fairing with a glovebox to place my iPod in but couldn't find anything that fit until I came across this. The installation was very simple and came with several parts to mount it. I kept the single DIN on and slid this inside and screwed the mounting brackets to it, very easy. It doesn't come with a cover so if you installing this on a motorcycle you'll have to buy a marine cover.

Have questions for
?

Crutchfield response on

Universal DIN Pocket

fit great, different face plates for a nice fit

Have questions for
?

Crutchfield response on

universal din pocket

Found product to be as advertised. Simple straight forward instructions that when followed gave clean looking completion to install.

Have questions for
?

Crutchfield response on

Universal DIN Pocket

Very basic, it fits the opening. I decided to improve it by bonding the shell halves together, putting thin foam insulation between the face plate and shell, and gluing thin felt in the interior. The foam insulation makes the mount to the dash opening tighter and prevents rattles. The felt in the interior trims it nicely, keeps any objects I put into it from rattling, and provides some damping of any vibration.

Have questions for
?

Crutchfield response on

Did the trick

It looks slightly cheap but mostly just does exactly what it is supposed to do. The 2 piece pocket made modifying it easy. The mounting matched up fairly well. If you are not so handy, it will be a slight puzzler.

Have questions for
?

Crutchfield response on

Not needed for my install

Not needed for my install

Have questions for
?

Crutchfield response on

Universal DIN Pocket

Excellent stereo, sounds great, Bluetooth works perfect!!! Kenwood really did a great job!!! Crutchfield did an excellent job getting it to me and the installation was a snap thanks to their install kit and instructions and great price!!!

Have questions for
?

Crutchfield response on

Universal DIN Pocket

Fit great, works great. Do not try to take apart as it will break tabs and not go back together.

Have questions for
?

Crutchfield response on

Universal DIN Pocket

worked very well made for an easy install.

Have questions for
?

Crutchfield response on

great

You guys have great products at great prices. ..and you above as and beyond in customer service

Have questions for
?

Crutchfield response on

Fit a 2000 Mercedes ML320

Very happy that I was able figure out how to make this work. I replaced the stock double din head unit in a 2000 Mercedes ML320 with a single din kenwood kdcx399 and needed this to fill in the space left over. There are two sets of brackets that come with this and I was able to add the ones without screw holes and push it into place. The unit snapped in and holds pretty well for not having any screws. I then pushed the din sleeve metal pieces into the top of the accessory box and it worked pretty well.

Have questions for
?

Crutchfield response on

Din Pocket for 1976 Ford Bronco

The stereo in my Bronco never worked so I removed it. I was looking for a blank-off plate or a pocket/cubby to fill the hole in my dash and came across this product. I wasn't sure if it would work with a 1976 Bronco but I figured if the stereo fit securely that this should fit similarly. I had to leave the stereo mounting sleeve (the thin sheet metal box with the tabs that you bend to secure it to the dash) for the product to fit securely. Took a bit of time to figure out the best way to install, but in the end it fits well and is secure.

Have questions for
?

Crutchfield response on

Versatile and functional

Very versatile and functional. I actually used it to install a new receiver on my boat. Many potential uses!

Have questions for
?

Crutchfield response on

Universal DIN pocket

Perfect fit and exactly what I was looking for in my 2000 ford mustang.

Have questions for
?

Crutchfield response on

Functional

Does its job

Have questions for
?

Crutchfield response on

Universal DIN Pocket

I used this in a 1991 Saab 900, in the lower single-DIN slot where the stock Clarion equalizer goes (I had a Pioneer 6-disc changer there that failed). Crutchfield's list does not include the Saab 900 for this part, so when I ordered it, the order automatically says "will not fit your car." Fortunately, it is "universal" enough: it fits, although the bezel left too much of the existing DIN sleeve exposed. I used the bezel from the old Pioneer unit and some black Sharpie ... and it does what it's supposed to and looks fine.

Have questions for
?

Crutchfield response on

Awesome And Perfect!

Bought this for my 2007 Honda Civic after installing an Alpine single DIN and it fits perfectly. There is a small gap on the edge but it's due to my aftermarket dash. This was exactly what I was looking for and was cheaper than other options. Thanks!

Have questions for
?

Crutchfield response on

Universal DIN

I think this is an excellent product that makes use of otherwise wasted space. It makes the area look like it has a purpose instead of a missing option, like a plain blank plate.

Have questions for
?

Crutchfield response on

Universal DIN Pocket

Good product

Have questions for
?

Crutchfield response on

Universal Din Pocket

Great trim kit for installing a single din head unit in my 1999 Chevy Suburban which has a 1.5 din. The installation was simple and looks like it was factory installed.

Have questions for
?

Crutchfield response on

din pocket

fits a single din slot very well lots of options. great price

Have questions for
?

Crutchfield response on

Universal DIN Pocket

Fit perfectly in my 1999 mustang where I removed the lower CD player. Looks like factory installed. Added some carpet to the bottom for storage.

Have questions for
?

Crutchfield response on

Worked great with simple modification. 2000 mustang

This worked great in both of my 2000 mustangs. I put new stereos in and used the old bracket from the old stereo. It just snapped right into the bracket. Very easy. I had to modify the outside frame a little but was very easy. You just take a lighter and melt the four little plastic nubs on the sides and then cut off with a razor knife. Then I used some super strong adhesive and glued it on. Looks great!

Have questions for
?

Crutchfield response on

Universal DIN Pocket

For what it is it's nice to fill the open single DIN hole with something. It would be even better if it came with a bulkhead USB mount or a auxiliary cable input option with the unit.

Have questions for
?

Crutchfield response on

Looks Better Than a Hole In The Dash, Barely

As others have said, unit doesnt fit very well in Ford DIN holes. Needs a little filler behind front bezel to keep from rattling. Used a little felt glued around the edges to snug up the fit. Was forewarned by the Advisor about this fact. Bezel is rather ugly and doesnt fit with the aesthetic of the rest of the interior. But better than a hole in the dash. Will be looking for a OEM replacement.

Have questions for
?

Crutchfield response on

Just Right!

The perfect face plates and mounting brackets/hardware for my car. Thumbs up!

Have questions for
?

Crutchfield response on

Universal DIN Pocket

it wasnt universal for a 1992 chevy k1500 pickup. very disappoided listing was very misleading

Have questions for
?

Crutchfield response on

ok, not great

I guess as far as kits go, it is as good as most. I wanted more instructions. Since I had used one before, I eventually figured it out.

Have questions for
?

Crutchfield response on

Universal DIN Pocket

The box is OK, but the frames don`t fit to my car at all, so I don`t use them.

Have questions for
?

Crutchfield response on

Universal DIN Pocket

Looks good and fills the empty space up

Have questions for
?

Crutchfield response on

Worked great on my 2000 Mustang

I installed a new stereo and also installed this DIN pocket replacement, in place of the factory CD player. It wasn't a perfect fit, but another reviewer on here recommended using a silicone sealant, which worked like a charm. They recommended black silicone, but I used clear and it is still a nice professional look.

Have questions for
?

Crutchfield response on

Universal DIN Pocket

Good job

Have questions for
?

Crutchfield response on

Universal DIN Pocket

Our 2000 Mustang has a separate receiver and cd deck installed from the factory. We put in a new Kenwood Stereo from Crutchfield and it fit great. But, where the cd deck was removed it left a hole where you could see into the dash and view the wires. This universal DIN pocket was the perfect answer. It covers the hole nicely plus allows a great place to put your Ipod while hooked up to the reciever. The fit was pretty good, just a little loose. We slid some thin gasket material, with a little black silicone smeared on, and placed them on the top and bottom of the pocket. This allowed the fit to be tight with no rattles.

Have questions for
?

Crutchfield response on

AAA++

very easy and good quality...save me for having pay for someone to install it...looks great and best of all came free with the bundle i purchase that time

Have questions for
?

Crutchfield response on

Could be better

I was able to creatively make the pieces work for me - certainly didn't work straight out of the box. I had to drill holes through the plastic and really use a lot of imagination to see how and then to make it work. I was a complete newbie to this, so it took a few hours of study but in the end, it doesn't look nearly as bad as I thought it would.

Have questions for
?

Crutchfield response on

Perfect Fit

Purchased to fill in the space in a Chevy Prism that originally had a stock 2DIN size radio when I replaced with a 1DIN size Sony unit. It fit without having to drill or adjust anything! And I was expecting to have to do some serious modifications to get it in - so I was very pleased.

Have questions for
?

Crutchfield response on

Universal DIN Pocket

great storage spot as a replacement for electronics.

Have questions for
?

Crutchfield response on

Confusing description

The description is a little confusing. I ordered this for a custom application where there is no aftermarket radio adapter (88 Buick Reatta). I ordered this kit because I thought it was a universal DIN radio mounting pocket but it's not. It's a pocket that takes up the extra space in a dash that had an original radio that is bigger than a DIN. It is way too small to put a DIN radio in to. When I opened the package and looked at the instructions, I found that it is not even universal, it is made for specific applications. I still may be able to use it to take up some extra space under the radio, but I will still have to find something to hold the radio in the dash. It was cheap enough to take the chance to see if it would work, but i wouldn't have even ordered it if I had known, or if the sales rep. had told me what it was.

Have questions for
?

Crutchfield response on

Just what it looks like

This worked good in my 2k Mustang. The pocket is made of top and bottom sections which can separate. This makes it easy to add ipod / aux wires which lead from your head unit. Since you can drill a hole where the two pieces meet, then pull the wire through before assembly, it's easy to create a hole that your connector can't slip back through when installed. Put the front of the box on first, then install the side rails. This eluded me for a bit. My box fit well, but didn't fit tightly. It rattled a bit until I shimmed it with some cardboard.

Have questions for
?

Crutchfield response on

Universal DIN Pocket

Product came with several different applications, we were able to adapt it to our Hyudai Sonata. The installation went smoothly and we are well pleased with the end result.

Have questions for
?

Crutchfield response on

We fought... I won.

Bought this pocket to fill a DIN opening left behind in my dash when I replaced the factory stereo. The instructions were nearly useless and I had to use a hammer to "convince" the pocket's brackets to slide all the way on. But it works and looks fine now that I've got it together and installed.

Have questions for
?

Crutchfield response on

Master Sheet

Crutchfield is always good with service and support....That being said, I installed this into a 99 Lexus I30 and there is not fact sheet. Please be sure to advise this with this people who have a Lexus....but customer support did email a hand written fact sheet.

Have questions for
?

Crutchfield response on

Universal DIN Pocket

for some reason it was a little confusing at first, but it works perfectly and looks good. very reasonable price also.

Have questions for
?

Crutchfield response on

Worked like a charm, but..

bought this for my girlfriends car, used the mastersheet which told me to use a different faceplate on the pocket than what i did use, no big deal as it came with it, just needs to be noted

Have questions for
?

Crutchfield response on