About the Infinity Kappa Perfect 900X
Worthy of your Harley-Davidson
Worthy of your Harley-Davidson
Sometimes all you want to hear is the roar of your Harley-Davidson, but when you crave music, Infinity's Kappa Perfect 900X 6"x9" component speaker system won't let you down. Designed to fit select Touring Series motorcycles, this system sports an IPX5 waterproof rating to ensure a long life on the open road. Infinity uses a basalt fibre Plus One™ woofer for its durability and responsiveness. 1" edge-driven dome tweeters thrill with distinctly smooth highs that cut through the wind and road noise.
Cool look and useful design
Infinity matches the classic curves of your Harley-Davidson with stylish, badged grilles. And thanks to a removable tweeter design, you have the option to install these as components or coaxials.
Product highlights:
- component speaker system includes 2 woofers and 2 tweeters with inline crossovers
- 6"x9" Plus One basalt fiber woofer cone with hi-roll rubber surround
- edge-driven polyphenylene sulfide dome tweeter
- removable tweeter works with component and coaxial configuration
- handles up to 100 watts RMS (300 watts peak power)
- frequency response: 50-20,000 Hz
- sensitivity: 95 dB at 2.83 volts
- grilles included
- warranty: 3 years
- Our 60-day money-back guarantee
- MFR # INFSPKKP900XAM
What's in the box:
Infinity Kappa Perfect 900X owner's manual
- Two 2-way speakers
- Two 16" Lengths of wire with in-line crossovers
- 2 Surface mount tweeter housings
- 2 Tweeter opening covers
- 2 Grilles
- 2 Mounting brackets
- 2 Speaker protectors
- 2 Templates
- Tweeter removal tool
- Eight 1" Screws
- Eight 1/2" Screws
- Four 5/8" Flat head screws
- Installation instructions
Reviews
Customer reviews
Loading reviews...
Infinity Kappa Perfect 900X reviews
Average review:
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Infinity Kappa Perfect 900X
Features & specs
| General | ||
|---|---|---|
| Speaker Size | Vehicle-specific | |
| Design | 2-way | |
| Tweeter Design | 1" Edge-Driven Dome | |
| Impedance (Ohms) | 3 | |
| Tweeter Composition | Polyphenylene Sulfide | |
| Woofer Composition | Basalt fiber | |
| Woofer Surround | Rubber | |
| Parts Warranty | 3 Years | |
| Labor Warranty | 3 Years | |
| Specifications | ||
| Sensitivity (1W at 1 meter) | N/A | |
| Sensitivity at 2.83 volts | 95 | |
| Frequency Response | 50 - 20k Hz | |
| Minimum RMS Wattage | --- | |
| Maximum RMS Wattage | 100 | |
| Peak Power Handling (Watts) | 300 | |
| Top-mount Depth (Inches) | 3 1/8 | |
| Bottom-mount Depth (Inches) | 3 13/16 | |
| Cutout Diameter or Length (inches) | 0 | |
| Mounting Height (Inches) | 0.714 | |
Product Research
Features
Mounting: The included templates guide cutting the opening in each saddlebag lid. The grille and mounting bracket are bolted together with the saddlebag lid sandwiched between them, then the speaker is mounted to the bottom of the bracket.
Neodymium Magnets: To reduce their weight, and not raise the motorcycle's center of gravity, both the woofers and tweeters use neodymium magnets.
Tweeter Mounting Options: Each tweeter is bridge mounted so there's no opening in the center of the woofer cone, making the speaker more weather resistant. The tweeters can also be removed and surface mounted using the included adapters.
Tweeter Dimensions:
| Surface Mount | |
| Mounting Height | 0.915" |
| Mounting Depth | screw depth |
| Frame Diameter | 1.866" |
Crossover: The crossovers' 8" input wires are terminated with male quick slides, 0.25" positive and 0.187" negative. The 8" woofer and tweeter outputs plug into the terminals on the speaker frames. When mounting the tweeters separately, the crossovers' tweeter output wires plug into the 8" wires attached to the surface mount housings. The crossovers are approximately ⅞" wide x ½" tall x 1¾" long.
Loading accessories...
Customer Q&A
Loading articles...
They sound great no matter what type of music you are listening to but some items were missing but Crutchfield sent me a new set the next day with a return UPS label and now we are rocking out, they sound better than the Rockford Fosgate kit on my 2013 softail saddlebags.
Gary from Ormond Beach, FL