Metra 70-1720T Receiver Wiring Harness

Worked perfectly

Have questions for
?

Crutchfield response on

Another great harness from Metra

I have always been happy with the quality of metra brand harnesses. This one is another good one, it is long enough that you can leave the OEM radio in its place and mount your aftermarket radio in the lower dash. The lower dash mounting keeps the stock look of the car to avoid unwanted attention to my new alpine radio.

Have questions for
?

Crutchfield response on

Huge timesaver. Must have for any installation

Works excellent. No problems encountered during installation.

Have questions for
?

Crutchfield response on

Fast, easy purtchase

Item arrived quickly and was exactly what I ordered.

Have questions for
?

Crutchfield response on

Simple, clean. Fit and finish.

This is the 3rd time I've ordered a radio, each time these harnesses are included and they make life so much easier. You aren't getting a run of the mill harness, your getting exactly what you need for a clean, problem free installation.

Have questions for
?

Crutchfield response on

Metra 70-1720T Receiver Wiring Harness

Hooked up great to my factory harness and directly to my radio

Have questions for
?

Crutchfield response on

Metra 70-1720T Receiver Wiring Harness

It worked fine.

Have questions for
?

Crutchfield response on

Metra 70-1720T Receiver Wiring Harness

??

Have questions for
?

Crutchfield response on

Metra 70-1720T Receiver Wiring Harness

Perfect! :)

Have questions for
?

Crutchfield response on

Metra 70-1720T Receiver Wiring Harness

It's good but personally I preferred the flat pins.

Have questions for
?

Crutchfield response on

Metra 70-1720T Wire Harness

Works perfectly for keeping keyless entry on a Honda and free with stereo purchase (vs. paying separately).

Have questions for
?

Crutchfield response on

Metra 70-1720T Receiver Wiring Harness

not much to say. I've never had a problem with a Metra harness, and this was no exception

Have questions for
?

Crutchfield response on

Well built Harness

This harness was recommened by Crutchfield to go along with my Pioneer head unit. The harness is very well built compared to others that I've bought. Overall great product.

Have questions for
?

Crutchfield response on

Metra 70-1720T Receiver Wiring Harness

Made installation easy!

Have questions for
?

Crutchfield response on

Metra 70-1720T Receiver Wiring Harness

The harness is great! It made the installation simple and allowed me to keep my factory keyless entry. Price was great. I like free.

Have questions for
?

Crutchfield response on

Easy Install

Worth every penny

Have questions for
?

Crutchfield response on

Worked well!

Easy to use, clear directions. Well done!

Have questions for
?

Crutchfield response on

Metra 70-1720T

The new unit went into a 1998 Honda Civic that incorporated the keyless entry into the factory head unit. This harness made the install a painless process and for Crutchfield to include it in the purchase was totally appreciated and an awesome gesture of customer service. Many Thanks Crutchfield!!

Have questions for
?

Crutchfield response on

Metra 70-1720T Receiver Wiring Harness

Wiring harness worked great and even had 2nd plug for stock radio for you be able to keep keyless entry working (even though the civic I have was used and did not have stock radio in it

Have questions for
?

Crutchfield response on

Metra 70-1720T Receiver Wiring Harness

Great product that makes installation simple

Have questions for
?

Crutchfield response on

Works like a charm and Thanks for the help

I installed a radio head in my son's 1998 Civic and when I was ordering parts initially, I guess I got ahead of myself and ordered the wrong harness. Got elbow deep in it on a Sunday and when I figured out I had the wrong harness, I called customer support - I talked to Jason(?) and he couldn't have been more helpful. He got the correct harness to me at no cost and even sent it priority mail so I could get the job done quickly. Thanks to everyone at Crutchfield - you are the best!

Have questions for
?

Crutchfield response on

Metra 70-1720T Receiver Wiring Harness

everything I needed

Have questions for
?

Crutchfield response on

worth every penny

the harness hooked right up (color to color),then plugged right into the factory plug.it was so easy

Have questions for
?

Crutchfield response on

Metra 70-1720T Receiver Wiring Harness

the easiest way to replace your stock Head Unit with a plug and play harness. awesome product and great instructions.

Have questions for
?

Crutchfield response on

Easy to use

Makes the job easy.

Have questions for
?

Crutchfield response on

Metra 70-1720T Receiver Wiring Harness

Works great. A must when trying to keep the factory alarm/keyless

Have questions for
?

Crutchfield response on

So easy to install

If you can follow instructions this is it .... Save your money and do it yourself and learn more about your car

Have questions for
?

Crutchfield response on

Critical gear for professional looking install

This is essential gear for an install where the factory radio has to remain wired for the key fob to work. I'd be lost without this wiring harness and the clear instructions provided by Crutchfield.

Have questions for
?

Crutchfield response on

Fast and Easy

This harness is really easy to use. It makes things simple and fast.

Have questions for
?

Crutchfield response on

nice

works as suppose to

Have questions for
?

Crutchfield response on

Great instructions and fit

I actually modified my harness (removing the second connector) because I didn't want to keep my keyless entry, as it hadn't been working reliably. The instructions are great, with one warning--when it tells you to splice the green/red and green/black wires, look for the light green wires--not the brighter green ones. Once you figure this out, it's pretty easy and straightforward. If you still aren't sure which wires to splice, a quick YouTube search should point you in the right direction.

Have questions for
?

Crutchfield response on

Perfect Match

The harness matched perfectly, the Master Sheet was very informative. I still had 1 question and Technical Support on the phone was EXCELLENT ...Can't say enough good things about Crutchfield...

Have questions for
?

Crutchfield response on

Beyond easy to use

Was recommended for me to get in order to keep stock features and they were right. Very easy to use.

Have questions for
?

Crutchfield response on

Very nice

Installing the reciever with this wiring harness was a breeze

Have questions for
?

Crutchfield response on

1997 civic deck swap

Easy to wire up and shipped to my door quickly.

Have questions for
?

Crutchfield response on

Yes!!!!!

Literally the best online purchase of my life. Item shipped fast. I installed in under 30 minutes and it allowed me to tuck the stock radio behind the dash, and use my aftermarket one. It came with instructions for the whole install and works like a charm!!!! So happy! thank you Crutchfield excellent service!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Have questions for
?

Crutchfield response on

Made life so much easier

Made my install so much easier for my 1998 Honda Civic EX .

Have questions for
?

Crutchfield response on

Easy wiring

This harness made installing the new stereo very easy. All you do is hook up the new stereo to the harness and plug it in! Worked like a charm. Thanks Crutchfield!

Have questions for
?

Crutchfield response on

Did not need to keep the old deck

I did not need to keep my old Honda stereo behind the gloove box as I was told for my auto unlock to work on my 98 Civic. Overall it was esy to install. I ecommand that you remove the old Civic deck and see if you locks still work, if so then you don't need to keep the old deck behind the dash.

Have questions for
?

Crutchfield response on

Works great

This harness did a fine job of connecting my new Sony to the old factory radio (needed to preserve keyless entry functions) and to the factory wiring in the dash. Note that you'll still need a soldering iron or a set of wire connectors to connect the harness to the wiring from your aftermarket radio, however.

Have questions for
?

Crutchfield response on

Metra 70-1720T Receiver Wiring Harness

Unfortunately the instructions assumed the manufacturer's original radio was still in operation and had not already been replaced by a previous owner of the auto with an Alpine unit. This is likely my error. Therefore instead of rewiring the system using the Crutchfield provided harness; instead cut the existing radio's connection to the harness already in place and soldered the Dual radio's connecter to the interface plug wiring. All is working flawlessly.

Have questions for
?

Crutchfield response on

Metra 70-1720T Receiver Wiring Harness

This wiring harness was extremely helpful and made the installation of my new reciever a snap. The only advice that would have been helpful and saved me some trouble would have been to have known that the radio that is being replaced also has the seperate cassette player, the cassette player needs to be removed also to make room for the factory radio to be stored if you have keyless entry.

Have questions for
?

Crutchfield response on

Life made easy

This harness was a tremendous aid in installing our new head unit. We soldered all of the connections with shrink tubing for protection but it could just as easily been done with crimped connectors. Only suggestion would be to include the connectors...

Have questions for
?

Crutchfield response on

Honda Wiring Harness

Excellent wiring harness for my car and it's perfect fit no cutting wires and it's easy installation with my new head unit..

Have questions for
?

Crutchfield response on

makes instalation easy

if you want an easy installation, this is for you

Have questions for
?

Crutchfield response on

Metra 70-1720T Receiver Wiring Harness

thank you it was a prefect fit for my car

Have questions for
?

Crutchfield response on

Perfect fit, clean solution, some assembly required

I bought this for and fitted this into my wife's 1998 Honda Civic EX. The harness is just the right length to fit the old stereo down in front of the shifter (and keep the keyless entry) and the fit of the connectors is superb. The instructions were very clear and make the mate to the stereo harness very easy. I would recommend soldering the wires of this harness with the wires from your radio harness for the cleanest look; you could also use inline crimped wire connectors to keep things fairly neat looking. When you move the factory radio, make sure you remove the faceplate to keep it from turning on and work on it to get it as far down into the hole behind the cigarette lighter as possible. I found that wrapping the old stereo as described in the included instructions was not an option as it makes fitting the stereo in the hole too difficult. I made a cardboard face to cover the hole left when the faceplate was taken off and that worked fine.

Have questions for
?

Crutchfield response on