About the Metra 72-5565 Speaker Harness
Use these harnesses to plug new speakers into the factory connectors present in your vehicle's speaker openings. Sold in pairs. Warranty: 1 year.
Note: Some aftermarket speakers have terminals that are wider than this harness's slide-on connectors. You may need to widen the harness's female slide-on connectors, or use the slide terminals that may be included with the speakers. If you need to connect your new speaker's connectors to the Crutchfield harness, soldering is best, and crimping is also very popular — see "Accessories."
What's in the box:
- 2 Speaker harnesses
More details on the Metra 72-5565 Speaker Harness
Metra Speaker Harness: Metra speaker harnesses prevent having to splice into your vehicle's factory wiring/speaker plugs when replacing the factory speakers with aftermarket speakers. Each harness features two female quick-slide connectors on one end to attach directly to your new aftermarket speakers, and a proprietary Molex connector on the other end that connects to your vehicle's factory speaker plug.
Quick-Slide Connectors: The Metra harnesses are equipped with large (positive) and small (negative) female quick-slide terminals. These quick-slide terminals fit directly onto most aftermarket car stereo speaker terminals (slight crimping may be required). In the rare cases the quick-slide terminals do not fit your car speaker terminals, you will need to replace the quick-slide connectors on the Metra speaker harness with the correct size terminal.
Note: No installation tools, hardware, or accessories are included. Please see the Accessories tab for recommendations and availability.
Quick-Slide Terminal Measurements: The positive female quick-slide terminal measures 0.205" (inner width), while the negative female quick-slide terminal measures 0.110" (inner width).
Wire Code Chart: Two identical Metra speaker harnesses are included.
The Metra 72-5565 Speaker Harness replaces these items