Metra 82-3016 Speaker Mounting Brackets

Made my tweeters fit like a glove

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

Works great

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

Excellent product, and the help was top notch. Will order again sometime soon.

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

didn't fit 2015 jeep wrangler without modification and a bit of hope - i couldn't get one of the screws in because of the poor fit so i'm hoping that it's jammed in there good enough between the one screw that i could get in and the trim piece that it will stay in place. i had to grind the mounting bracket and still couldn't get the fit right.

Have questions for
?

Makes upgrading easier

Sturdy bracket that shouldn't have any resonance for mounting my tweeters in the dash. Much easier and saves time on making your own which I've done in the past

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

These free brackets with my purchase works flawless to replace my factory speakers with after market tweeters. crutch field coming in clutch every-time. simple measure the speaker, punch out with a hole saw and your off to the races.

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

These worked great, fit perfectly in my 2016 Highlander, and were easy to use. You will need a hole saw and a drill to install your tweeters in them.

Have questions for
?

Good product

Very useful made adapter out of it

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

Worked great!!

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

I didn't realize you have to drill your own holes.

Have questions for
?

works as advertised

Used to install Kenwood Excelon KFC-X2C mids into dash corners of 2020+ Subaru Outback. This is not a drop-in replacement, some customization is required and I knew that before ordering. Brackets are fairly easy to cut or drill into. Lined up perfectly with original screw holes. I used 1/8 quarter inch rivets with additional washers to secure the speakers and the plastic took it well, no cracks. I only wish it was a bit thicker.

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

These do not fit a 2014 Kia Optima as the website indicates. Also my surface mount type of tweeters requires a hole saw exact sized in order to cut these brackets to fit. I manufactured my own brackets using the original factory tweeters instead.

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

Not even close to fitting. Had to modify it to fit somewhat

Have questions for
?

Perfect just what I needed

This part saved me so much time not having to fabricate or make the piece to attach the tweeter to. UPDATED 10/19/22: I already wrote a review on this part but a lot of reviews say that they don't fit. At first I was saying the same thing when I first tried to fit test the plastic plate. It did not fit into the manufacturers original counter sink hole pattern. It DID fit nicely above the hole pattern. I screwed right into the plastic of the speaker enclosure to mount the plate. If you don't think it fits, move it around to different shot and it just might fit and work. In my case it did work.

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

Had to make a hole in them but they fit great and they were free thx Crutchfield

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

Awesome sound from these tweeters. Definitely add more color to the overall Sound in my Jeep.

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

These made installing different size tweeters in the factory location a breeze. I just drilled out the hole to fit the tweeters and then used a little super glue to these mounting brackets and they worked like a charm.

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

Definitely helped

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

Grandslam Nico , Lady Knows Her Audio Stuff

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

Perfect fit of opening

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

Had to use to complete install ...worked good

Have questions for
?

Great Tweeter Mounts

Worked great for mounting the Kicker 1" Tweeters in the dash corners of my Jeep Wrangler JL.

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

Incorrect Tweeter mount for 2016 Jeep Wrangler JKU Does not fit front location or Sound bar location

Have questions for
?

doesn't fit well

Did not fit properly in my 2021 Jeep Wrangler JLU. I had to cut down on one of the ends, halfway through one of the screw holes.

Have questions for
?

great

Nice little option

Have questions for
?

Grand Rapids

Fits with some modifications. We had to make some adjustments with a bandsaw to make it fit. 2015 Wrangler JK.

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

Proper size and easy cutting to adapt

Have questions for
?

Easy to use

Nice to have, you might need to modify (cut holes) depending on the height of your tweeters.

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

Did not fit opening in 2021 Jeep Wrangler. Had to trim off one side to get it to fit in opening which leaves only one screw to hold it. It's only supporting a 1" tweeter so no issues with that.

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

Fit the space just right after adjusting with a Dremil tool and hole saw

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

These brackets worked very well in the soundbar of my Jeep JK. Not real easy to modify to fit the speaker unless you have the right tools.

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

Great aftermarket mounting plates to relocate component tweeters. Best part was they came free with my speaker purchase!

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

Perfect fit, just need to drill a hole according to the speaker's cut open diameter.

Have questions for
?

So bad I made my own.

2020 Jeep Wrangler JLR So bad I made my own. These are *not* a drop in fit for the 2020 Jeep JL dash corners. The holes do not match the dash speaker holes and the bracket itself is about 1/8th" wider than the space itself. I could have cut the ends down but the plastic is quite tough and difficult to shave or sand. My JL tweeters needed a 1-5/8th" hole to flush mount. A pretty standard tweeter size that is wider than any sink drill or auger and basically required a hole saw to cut. Even with the bracket clamped firmly in place the hole saw danced all over the slick surface and just made a mess. After mangling one bracket in an effort to make it work I gave up. Installed the tweeters with a custom bracket made from sheet plastic I had left over after another project. Good news is the set was free from Crutchfield. I genuinely appreciate their efforts to make sure you get everything you need for an install but sadly these were duds.

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

Perfect fit!

Have questions for
?

Perfect fit just as advertised!

Brackets fit perfectly without issues for the dash tweeters on my 2021 Crosstrek. The tweeters I picked flush-mounted to these, so a quick mfg. recommended hole in them, then installation was all that was needed!

Have questions for
?

Good product but not a direct fit

Only took a star off because they will need trimmed down and a new mounting hole made to fit into the dash of my 2007 Grand Cherokee. Obviously this product is made for a somewhat custom install already but to say it's what fits in the grand Cherokee isn't 100% true.

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

Made the install easier

Have questions for
?

Worthless

Not really sure what the thought was when this was created, but how do I get the tweeter into the hole when the bracket hole is missing? There are other available online brackets that are much easy to work with. Additionally, the small screw holes did not match up to my Jeep Wrangler JL.

Have questions for
?

Great product, great price

Fit pretty good. Needed a little modification. I'm very happy with this purchase.

Have questions for
?

good but could have been better

having a pieces that you could pop out for size would have been nice to have. Not everyone had a drill to make theses work.

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

Made mounting my tweeters very easy

Have questions for
?

Not usefull.

Pickup truck dash - no room to reinstall factory grids! I made my own brackets to hold tweeters lower. Thanks but useless.

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

Require a lot of modification

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

Had to do some small modifications in order for it to fit my particular project. But it serves it purpose well!

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

Works perfect to mount dash speakers

Have questions for
?

lots of cutting and shaping

Wish there was a pre-cut that fit the tweeters I purchased.

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

A simple solution to a potentially aggrivating problem! Thumbs up!

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

Predrilled holes would have made this product useful.

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

Sturdy bracket but did not fit 2010 Nissan Altima sedan corner dash opening. Too big and didn't line up to screw holes. I researched into the bracket and found out it's not designed for my car though it was sent with the speakers I purchased

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

Made replacing the tweeters in my fast very easy!

Have questions for
?

Metra 82-3016 Speaker Mounting Brackets

Good was need to make bigger hole for the screw.

Have questions for
?