Metra 82-3412 Speaker Mounting Brackets

They worked perfectly and was easy to use. I recommend them to all

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

The brackets made installation of my front door speakers possible. Had to make some custom adjustments besides snapping off unused slots. Overall decent product

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

Used these to mount 6 1/2" speakers in the door of my civic which originally had 5 1/4". The brackets worked great, I only wish they came some different length screws. Ended up having to use my own screws to get the right length.

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

The mounting hardware included was useless. When you look at the length of the mounting tabs, then look at the way too small spring nuts it makes you wonder why they included them!

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

A little tricky. Have an open mind.

Have questions for
?

Crutchfield response on

Just follow the instructions

Well all I'm going to say is that if you follow the relatively easy instructions and are somewhat mechanically inclined these mounting brackets are a pretty straight forward install.

Have questions for
?

Crutchfield response on

Ok

Have to drill

Have questions for
?

Crutchfield response on

This isn't the bracket Metra recommends for 7th gen civic

These were difficult enough to deal with that you might consider fabricating custom speaker brackets instead. Although I admit, it's funny reading the reviews like "Super easy! Just a breeze to install with no directions. Anyone could do this!". You should know that Metra themselves state that these brackets are specifically designed for the 1998 - 2007 Geo Prism. To adapt speakers for the front door location in a 7th gen Honda Civic, Metra says you need the "Metra 82-7803 Speaker Mounting Brackets". Looking at the design, I can see that the one Metra suggests has two pins designed to fit into the two bottom holes for the OEM bracket, which then lines it up to the optimal position. It's like it's telling me "Hey Clayton, we added in some design features just for your 7th gen Honda Civic", whereas this bracket is more like "YOLO GOOD LUCK DUDE LMAO!" If Crutchfield thinks these work better than what Metra recommends, they should add a note somewhere on the page explaining why, because otherwise it just seems like they didn't do their due diligence. If someone from Crutchfield is reading this I would really like to know why this mismatched bracket was supplied with my order. Don't rush these purchases folks. Read the documentation on everything you're considering buying BEFORE you buy it and cross reference between separate sources if possible. If I'd done that I could have caught this earlier.

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

Served its purpose good mounting brackets for cheap

Have questions for
?

Crutchfield response on

Prepare to do more modification than drilling new holes in the door

I wasn't terribly impressed. While these brackets gives the necessary clearance to fit in 2004 Honda Civic's front doors, you need to a bit more modification than I expected. The speaker mounting surface did provide any usable holes for the JBL 631 I was installing so the needed to be modified. In addition, there is no clean way of getting these brackets to attach to the door, so new holes need to be drilled. (btw - this was made clear by Crutchfield) The shame of it is the stock speakers are clipped in a very ingenious manner. Metra creating a mounting brackets that fits those clips would be an ideal solutions.

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

These brackets were very useful and helped push the speakers away from the door glass.

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

Really didn't like the way they fit wouldn't line up with holes on the door only used two screws out of three and that bothered me but it's in so I have two screws that I have in my arm rest sitting really should have got the same brackets for rear that a got for front doors

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

Does as advertised

Have questions for
?

Crutchfield response on

Worked great

With a little measuring and drilling, brackets worked great. All applications might not need fab work but mine did

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

Brackets mounted in perfect with holes very good quality would recommend to others and buy again.

Have questions for
?

Crutchfield response on

Did not fit Mazda 2

Glad these came with the purchase because they did not have the correct aligned holes for the speakers.

Have questions for
?

Crutchfield response on

Toyota

Allows mounting standard speakers to Toyota doors, because they feel the need to rivet in speakers with three mounting points...

Have questions for
?

Crutchfield response on

fit perfectly

made installing easy

Have questions for
?

Crutchfield response on

Not the best for MY installation

My experience with these in my 2005 Subaru Outback XT was not as expected. Normally, I don't have to drill holes to use an adapter. That is the purpose of the adapter. I was aware of the need to drill holes BEFORE they were shipped to me but I don't understand why send the adapter at all. I used the one included with the speakers as it had to be drilled as well.

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

I am happy with them, however, if I spent more time driving I would consider purchasing an underseat sub just to add a little more punch (I listen to planar headphones and am spoiled at home) but these car speakers suffice in clear/clean sound.

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

Not a fit for 2005 Mini Cooper

Have questions for
?

Crutchfield response on

Not as hoped

2007 Honda Fit Sport - these brackets are almost worthless. Requires massive modification. I guess they were free, so they get 1 star.

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

Took a while to figure out

Have questions for
?

Crutchfield response on

2004 Honda Civic

I wasn't real impressed with these brackets. They did help with clearance, but it was definitely not plug and play. I ended up drilling holes in the door panel to make them fit.

Have questions for
?

Crutchfield response on

Works well on my 2006 Subaru Outback with minor modifications

I bought these to install speakers in the rear doors of a 2006 Subaru Outback. Only 2 bracket holes lined up with the existing holes in the doors and I had to cut some of the outer tabs so the bracket would lay flat on the door. I drilled another hole in the door for the third screw. Overall it worked well with some minor modifications.

Have questions for
?

Crutchfield response on

So - So

I had to heavily modify these but they did help with clearance. Did not work right out of the box but I managed to use them anyway

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

don't know of any other application other than my own(08 honda fit sport)

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

I received these brackets for my 08 Subaru outback. I bought a pair of kickers on here for my back doors and these were included, website claimed these would fit however it seems they don't. I had to drill a hole in each door to get these to even securely fit. If you have a Subaru don't waste your time with these brackets

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

Great freebie!

Have questions for
?

Crutchfield response on

Great Brackets!

These adapters made the speaker installations easy!

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

I got these with my Infinity Reference speaker order for free. REF-6530CX Components for the front, REF-6532EX for the rear. I wondered why they were included as Reference speakers come with mounting brackets. Well, the door panel holes for the speakers are oblong in the Honda Fit. You need the thickness of these Metra 82-3412's to fit 6.5" speakers and leave plenty of room in the door cavity. These are universal brackets and the tabs were easy to cut as needed. I only needed to cut one tab for the drivers side front door. For the front speakers, I didn't even use the tabs as I simply drilled through the ring. For the rear speakers, the bracket tabs were used to secure them to the door. I did drill holes for the screws (holes were properly prepped & blue loctite was used).

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

Better than nothing

Have questions for
?

Crutchfield response on

Don't Use These For 2nd Gen Honda CRV

If you have a 2002 - 2006 Honda CRV, you have funky-shaped speakers which present an installation challenge. I bought two pairs of JVC 6 1/2"speakers for the front and rear of a 2004 Honda CRV and Crutchfield included these in my order for free. First let me say thank you to Crutchfield! Next, I get that these are universal mounting adapters, but they take too much work to make it fit and at that point, you might as well just fabricate your own speaker adapters. One reviewer got these to work in his CRV by cutting all of the tabs off and just using the circle part. Here is what I did for any CRV owners who are facing the same situation and want to know: I bought Scosche SAH6 6 1/2" speaker adapters for a Honda Civic. I also bought "Foamies" 2mm self-adhesive closed-cell foam sheets from the craft store (stay tuned! LOL). I removed the factory speakers, then cut a piece of Foamies sheet to seal up the factory mounting holes and to provide some sound dampening. Then I drilled three 1/8" holes to mount the Scosche SAH6 speaker adapters and mounted it using the screws from this Metra kit. The Scosche adapters didn't require any fabrication apart from drilling. Please see the attached photos, I hope this helps other CRV owners. Crutchfield, it would be great if you could update your installation database for the 2nd-gen CRV with this information - the Scoshe SAH6 adapters definitely work for the front and rear doors!

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

They fit and they were free.

Have questions for
?

Crutchfield response on

Nope

Didnt fit car and I didn't use them

Have questions for
?

Crutchfield response on

82-3412 Speaker Mounting Brackets

These worked pretty well with my 04 Honda for the rear deck. But, be very careful. One the screws caught the side of the rear deck and it cracked all the mounting tabs - it was unusable after that...

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

The brackets didn't fit my 2004 Honda CR-V. I had to do some modifications for it to work but it did work out in the end. Hopefully they stay well. I've had them installed for 2 weeks and they've been stable thus far.

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

These are basically a universal bracket. I had to drill holes in the ring to mount my 6 1/2" speakers AND I had to use a sheet metal screw in the metal door to mount the bracket to my 2008 Outback. Two of the three holes lined up but plan on "making it work" mentally. Really would like a better product to fit common speakers and my car.

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

Un-usable for the 2006 Subaru Legacy rear doors. Used the brackets included with the speakers instead which fit fine.

Have questions for
?

Crutchfield response on

Perfect fit to mount speakers

Perfect for mounting my Rockford Fosgate speakers!!! Made it a breeze!!!

Have questions for
?

Crutchfield response on

They Fit PERFECTLY!

They fit PERFECTLY in my 2002 Toyota Corolla!! highly recommend it as it is decently strong meaning it resisted bending and snapping when I screwed it down in the rear deck. Crutchfield SERIOUSLY knows what they are talkin' about!!

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

Not the best plastic, but worked fine for my application (aftermarket speaker bracket to fit into my 2004 Honda CR-V doors).

Have questions for
?

Crutchfield response on

Worked great for a Corolla

Adapters worked great for a 2002 Corolla. Allowed installation of Polk MM6502 woofers in front doors. No issues during install. I did use dynamat and foam seal strip.

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

Universal fit, still needed to drill

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

Installed in a 2007 Honda Fit Base. They got the job done but could be better. They need more of the removable tabs, that would make them more versatile.

Have questions for
?

Crutchfield response on

They Work

I got these for my 2005 Honda Civic EX Special Edition. They come with screws to mount them to the sheetmetal. You do have to drill 1/8" holes for this Civic, but it took a matter of seconds.

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

These brackets worked perfectly.. For the front door install.. Drilled 1/8in. holes and screwed them down.. No muss no fuss..

Have questions for
?

Crutchfield response on

Incompatible

These were not compatible with the tail door speaker holes of my 2018 Ford Transit Cargo Van. They were dramatically undersized. I ended up needing to make my own brackets out of plywood and discard these. The pan head screws they provided did come in handy for installing my wood brackets, so an extra star for that. Crutchfield's order history is a little confusing as they state that these were intended for my front door speakers when they were not compatible with those holes either and the other brackets that were provided worked very well for the front door speaker holes, so I'm not sure what's going on there. I confirmed with tech support that these were listed as compatible for the tail doors on my vehicle.

Have questions for
?

Crutchfield response on

Bracket fit both car and speaker, but watch mounting screws

After I snapped off the long tabs as per instructions, the bracket fit just fine in my 2002 Honda Civic EX Coupe. Crutchfield told me I would have to drill new holes for the bracket, so no problem there. It's worth noting though, that if the mounting screws for the speaker itself are longer than the thickness of the bracket, you'll have to drill holes not just for the screws that fasten the bracket to the door panel, but for the screws that fasten the speaker to the bracket. Once that was done, it worked just fine.

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

Didn't even fit my 2002 honda civic lx sedan front door like it said it would. So i ended up cutting a hole in the plastic of my door and screwed the speaker to the door.

Have questions for
?

Crutchfield response on

Worthless

I can see how this bracket could work on my 2004 Civic (front door), but it would have no connection to the instructions, and I'm not sure it would be an improvement over simply screwing the speaker directly to the sheet metal, since I'd have to make new holes either way. Even if I did that, there would be no seal above or below the bracket, and I'd still need to buy machine screws, nuts and washers. I did what all of the instructional videos I found did, and cut the old speaker out of the bracket and screwed the new speaker into that.

Have questions for
?

Crutchfield response on

Door Adapter for my Honda

Door Adapter for my Honda Works like a charm. No drilling. Used existing holes

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

Easy to remove extra tabs and intuitive mounting.

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

Works well

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

I received these brackets for a 2006 Honda CRV, I was able to use the adapters/brakets but they don't seem to be ideal for these vehicle's front doors. Because of the shape of the original location the bracket does not fit flush with the door and when you tighten the screws the bracket bends. .

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

Great Bracket for mounting of speaker.

Have questions for
?

Crutchfield response on

Easy install

Easy to install, just need a drill bit

Have questions for
?

Crutchfield response on

Fits well, short on hardware.

These adapters fit very well, but the instructions specify you use the included sheet metal screws for installation of each speaker (6 per speaker), but the kit only comes with 6 and you're going to need 12. Prepare for a trip to the hardware store. Otherwise an excellent fit.

Have questions for
?

Crutchfield response on

Just what I needed.

Good fitment

Have questions for
?

Crutchfield response on

Great Speakers/Wrong Speaker Mounts

These mounting brackets DO NOT fit the vehicle! I had to fabricate my own.

Have questions for
?

Crutchfield response on

Not good for high output

Installed in nissan versa s sedan 2016 with kicker 300 watt speakers. Year later each mount has a broken ear.

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

These did served but only after using a Dremel tool to modify the holes in the tabs so they would fit the OEM mounting points.

Have questions for
?

Crutchfield response on

Free product

Glad they fit they car. Should have called the technical support number because there were no clear instructions as the location. I had to swap the speaker brackets after completing the job because the left front window wouldn't roll down. Felt like a dweeb.

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

Correct depth and worked well installing 6.5" 2-way Infinity Reference speakers into 2014 Mazda2 Sport front and rear doors. Appreciate that Crutchfield includes them for free as the list price for this plastic ring is borderline. With a bit more time and effort, repurposing the OEM bracket and harness would work fine, but is less convenient. Minor annoyance: As is the case on many door panels, the apparent speaker grill is fake; the actual opening is smaller. But when mounting this correctly centered on the door, the speaker is NOT centered to the grill opening. Thus, some of the woofer edge to one side is putting sound into the back of the door panel. Could point the finger to Mazda or Infinity or Metra or Crutchfield, but no one has taken it upon themselves to offer a fix.

Have questions for
?

Crutchfield response on

Didn't work

I held these up to the door and the speaker and they were not a match to either. I decided to modify the stock speaker mounting for a cleaner fit and install.

Have questions for
?

Crutchfield response on

Stupid design

I'm not sure who dropped the ball here, Crutchfield for thinking these would fit my car or Metra for a stupid design. They literally suspend the speakers over the hole - no seal, no baffle, nothing. It's nothing but noise cancellation, as there's no way a speaker could produce any air pressure with the lack of a seal. They're currently in my recycling bin.

Have questions for
?

Crutchfield response on

Perfect fit

Perfect fit for 2006 subaru outback

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

Nice and easy

Have questions for
?

Crutchfield response on

No fit

Didn't fit my application. Used brackets supplied with speakers instead

Have questions for
?

Crutchfield response on

Ford Transit front doors only

These adapters worked well for the front doors of Ford Transit but not rear doors. Still trying to workout which ones will fit in rear...

Have questions for
?

Crutchfield response on

cheap, cheerful, brittle and buzzy

These came with my order for free. So I can't complain. But they are a hard, brittle plastic. Not ideal for vibration dampening. The stock brackets (glued to the speakers) are of a semi-rigid, but also malleable, rubber. The stock brackets seem to do a much better job of sealing the speakers, dampening vibration and preventing an annoying buzz-- these, not so much. If I have time, I will have to reverse my entire installation procedure, purchase better quality brackets and reinstall. With popping a door cover and drilling holes, this not ideal. Butter to spend a few bucks and use quality brackets the first time-- these are not it.

Have questions for
?

Crutchfield response on

Very poor instructions, very poor tech support

For starters the screws that came with the speaker are too long. They will mount the speaker to the ring but protrude out the back 1/4". I would have to drill another hole in the metal to give the screw enough room. The other screws are too short for anything other than mounting the ring to the door. Ok, that's done. But how do I mount this speaker!! What fasteners?? Also, it came with speaker baffles. I've been all over the website and all over Google and I can't find one thing that tells me how to mount the baffle. Does it go between the door and the ring? The ring and the speaker? Behind the door? What's the stacking order here people! It seems this is a generic ring that is for a variety of speakers. Ok, fine. But I need more information here. I called tech support and my talk with them was basically unhelpful. All they wanted to tell me was that it doesn't matter which clips and screws are used where, anything that I have to do to mount the speaker is Ok. I have the ring screwed to the door but I really have no idea how to put this speaker on. I'm stuck and Crutchfield has not been any help. They don't tell you how the parts go together here. You guys have made me hate this process so far. I hate this crap!

Have questions for
?

Crutchfield response on 4/11/2017

We were sorry to hear about Wayne's experience and our mix-up with Tech Support team. We strive to provide the best service, before, during, and after your purchase, and it looks like we missed the mark this time. We forwarded this review to our Technical Support team for follow-up. They can help you solve the problem or set up a return/exchange within 60 days of purchase. Lifetime tech support comes with every Crutchfield purchase.

Metra 82-3412 Speaker Brackets

These do not fit a 2006 Honda CRV, front or back. Not sure why they would suggest these to customers. I suppose you could mod them enough to work but if you were going to make that big enough effort, just use stock plastic mounts and modify with wood rings like I see on an online video site. I certainly would like to see pictures of these being used on a CRV. I would give this Zero stars!

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

No feet to my 2006 Honda CRV

Have questions for
?

Crutchfield response on 3/8/2017

Whenever you encounter a problem with anything you purchase from Crutchfield, please contact our tech support team right away. Lifetime tech support comes with every Crutchfield purchase.

Required self tapping screw

As others have stated and I knew this prior to purchasing this did require a self tapping screw to complete the installation. I have a 2007 Legacy and it fit perfectly and have had no issues installing this and the speakers.

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

Super easy had to drill one hole in the door. Took 2 minutes for then good to go

Have questions for
?

Crutchfield response on

Great product

Made installation of my speakers a breeze.

Have questions for
?

Crutchfield response on

Better than literally nothing

Terrible. Kind of work. 2/3 holes lined up.

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

Did not come close to working on my 07 Legacy as claimed. After extensive modification, I used them but......

Have questions for
?

Crutchfield response on 1/9/2017

Jay, we're sorry you had problems with these brackets. Whenever you encounter a problem with anything you purchase from Crutchfield, please contact our tech support team right away. Lifetime tech support comes with every Crutchfield purchase.

Metra 82-3412 Speaker Mounting Brackets

This did not fit my 2017 wrx like they said it would.

Have questions for
?

Crutchfield response on 12/21/2016

Once we saw this review, our Tech Support team reached out to this customer to issue an apology and help him further. We'll either help him get the brackets installed correctly, or help him return them for an exchange or refund.

Great company

Great product, easy install and fast shipping. Best price I could find as well.

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

Helpful adapter, not perfect but able to make it work and sit flush with only one hole to drill.

Have questions for
?

Crutchfield response on

Poor fit, awful instructions

First of all, there was no information included with my order (2 pairs of speakers, different sizes) as to which set of mounting brackets was for which speaker. I spent upwards of 30-45 mins trying to install the rear speakers in these before realizing that it was the wrong set of brackets. After finally figuring this out, the instructions for mounting the speaker to the adaptor were completely lacking. It says something to the effect of "mount speaker to bracket." Wow, really helpful! What the instructions don't tell you is that you'll need to break off some of the tabs on the adaptor bracket to get them to fit on the door panel of the car. Even after breaking off extra tabs, the fit is still poor, and you need to drill holes in the door to install the bracket.

Have questions for
?

Crutchfield response on 12/7/2016

Jake, we're sorry you had difficulties with your installation. Whenever you encounter a problem with anything you purchase from Crutchfield, especially a situation like this, please contact our tech support team right away. They can help you solve the problem and get the speakers installed and working! Lifetime tech support comes with every Crutchfield purchase.

Metra 82-3412 Speaker Mounting Brackets

Does not fit 2014 Mazda3 with Bose system.

Have questions for
?

Crutchfield response on 11/30/2016

We're sorry you had problems with this bracket. Whenever you encounter a problem with anything you purchase from Crutchfield, please contact our tech support team right away. They can help you solve the problem and get the bracket installed correctly. We forwarded this review to our Technical Support team for follow-up. Lifetime tech support comes with every Crutchfield purchase.

No instructions, no clue

Didn't fit, not really. No installation instructions so I had to go it on my own. Had a hard time ,holes didn't line up . Apparently there are no instructions for a 2013 ford escape. Still have the front door to do. So wish me luck.

Have questions for
?

Crutchfield response on 10/25/2016

Whenever you encounter a problem with anything you purchase from Crutchfield, please contact our tech support teams right away. They can help you solve the problem and get the bracket and speakers installed correctly. We forwarded this review to our Technical Support team for follow-up. Lifetime tech support comes with every Crutchfield purchase.

great adapters

nice product-should work well

Have questions for
?

Crutchfield response on

Speaker brackets for 2016 Rogue

Haven't actually installed them yet because on the first try they didn't fit. One hole location on the tabs is off by about 1/4" so will have to file it out and put a brace across the two tabs, which luckily it has to use.

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

Made the installation very easy.

Have questions for
?

Crutchfield response on

nice thought

I gave it a 2 becatse it did well by matching 2 holes with the car door considering its a 1 size fits all. But the screws provided dont hold the speaker on. I tried and the speaker fell off within the first week. I had to buy new screws that were thicker and longer and its held it up.

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

Nice product, but the mounting holes didn't line-up exactly. I needed to perform a few modifications in order for them to fit properly.

Have questions for
?

Crutchfield response on

Perfect adaptor

These brackets allowed me to use a slightly larger speaker than the originals. Worked great and installation was a snap.

Have questions for
?

Crutchfield response on

Speaker plate adapter

These are solid adapter plates. They just do not fit the 2016 versa. The holes did not line up with those on the vehicle. Two holes lined up which is not enough for a secure mount. I had to fab my own for the front due to the mount depth of the speakers I installed but incorporated these plates and drilled all new mount holes.

Have questions for
?

Crutchfield response on

Made install a breeze.

These are great brackets for a clean, factory style install. Ordered these for a 2016 Ford Fusion and used them in all of the doors. Make the speakers fit like they should. Took longer to remove the door panel than it did to mount and wire the speakers.

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

Fit was perfect, made the overall install easy!

Have questions for
?

Crutchfield response on

Very usefull

Great add on to the speaker purchase. Other sites wanted to sell more expensive ones for additional cost, not Crutchfield!

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

trimmed tabs off that I didn't need and drilled 3 holes in door. speaker fit fine. was unsure about the drilling so I called customer service and rep walked me through the steps. all I had to do was trace original bracket with a sharpie and apply bracket over to see where drill holes went.

Have questions for
?

Crutchfield response on

Metra 82-3412 Speaker Mounting Brackets

Made installing aftermarket door speakers a snap. Highly recommend these for any door installs.

Have questions for
?

Crutchfield response on

Decent Fit

The brackets fit pretty well - they have no problems going into the hole in the door. You have to spin to adjust where the attachment tabs will go to make sure you find a flat spot to mount them. I was able to get two flat mounts and one "less than flat" and it worked well. There was no issue getting the door cover back on. Mounting the speaker in the bracket was a very tight fit (the screws nearly had to point in to mount, but with a little time and effort, it worked.

Have questions for
?

Crutchfield response on

worth every penny

Did not fit a 2001 Honda Civic DX. Had to drill the door panel to align holes and tabs. Fairly fragile, brittle plastic construction. Looking thru the teviews, it seems fitment is an issue with many vehicles.

Have questions for
?

Crutchfield response on

Junk !!

Good thing these were free, then again it may be why they are free. If you own a 2006 Honda Crv do not get these as they don't work without having to modify the crap out of them, all outer mounting tabs are way too long no matter how you position it. Had to go buy smaller screws to mount the speakers on to it because the ones sent would bottom out on door panel, and I wasn't drilling any more holes. What should have been a 30 minute job took 2 hours, that was for 1 door, I still have the other one to do and stopped out of frustration and will tackle other one tomorrow. These may be universal for other Honda models, just not for a 06 Crv !

Have questions for
?

Crutchfield response on

breaks apart and crumbles

I bought 2 sets of these and they both have broken apart and crumbled, especially at attach points.

Have questions for
?

Crutchfield response on