About the Metra 95-6522B Dash Kit
Metra 95-6522B
This mounting kit allows you to install a double-DIN (4" tall) aftermarket stereo in your vehicle's dash opening. Please enter your vehicle information or call an Advisor at 1-888-955-6000 to find out if this kit is compatible with your vehicle. Warranty: 1 year.
What's in the box:
Metra 95-6522B Dash Kit owner's manual
- Radio housing
- 2 Brackets
- 5 Large retaining caps
- 2 Small retaining caps
- Five #8x 1/2" screws
- Two #8 x 3/8" screws
- Installation Instructions
Reviews
Customer reviews
Loading reviews...
Metra 95-6522B Dash Kit reviews
Average review:
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
Crutchfield response
More details on the Metra 95-6522B Dash Kit
Researched by Crutchfield's Stacey B.
Loading accessories...
Customer Q&A
3 questions already asked
Q
If this new dash panel allows for a double din installation, is there a bolt in dash kit that will allow installation of a single din head unit and a small parametric equalizer ?
[ R. Brian Feb 26, 2016 ]
1 answer
A
For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on what fits and what you will need for an installation in your vehicle.
[ KENNETH Feb 26, 2016 ] Staff
Q
I was wondering my dodge has the Fancy looking plastic that looks like wood does this come with the skins to keep that look or just black?
[ Brandon Mar 14, 2015 ]
3 answers
A
no, just the black trim but you can buy vinyl to wrap it in.
[ jimmy Mar 17, 2015 ]
A
I only see black available. MetraOnline is their website and if you do a search for your make/model, they also do not list a wood grain model.
[ Dave Mar 16, 2015 ]
A
Just black.
[ Nathan Mar 15, 2015 ]
Q
What size double din radio fits this product?
[ larney Oct 31, 2014 ]
6 answers
A
Any of them will. I put an alpine double din in and with a few modifications inside the dash it fit luminescent a glove.
[ Julio Nov 11, 2014 ]
A
From my limited understanding, "Double Din" is the size, meaning as long as it is a "Double Din" radio, the size is the same. Single-Din, Din-and-a-half (stock on my Dodge Ram 2500), and Double-Din radios are like saying Size 12, 14, and 16. To quote Wikipedia:
"The US standard for a DIN radio is 2" x 7" (although the actual 180 mm width converts to something like 7-3/32" so most people use 7-1/8" to allow for clearance) and the Double DIN sized radio is a 4" x 7"..."
(en wikipedia org/wiki/ISO_7736)
[ Richard Nov 03, 2014 ]
A
I used an Alpine ICS-X7HD which fit perfectly in my 2004 Ram. It requires some cutting of the plastic inside the dash which was easy enough to do but the radio fit the kit perfectly.
ICS-X7HD Dimensions
Din Size: 2-DIN
Chassis Size (W x H x D) mm: 178 x 100 x 159 mm
Chassis Size (W x H x D) in: 7?? x 3-7/8?? x 6-1/4??
[ Dave Nov 03, 2014 ]
A
Double din is a standard size they will all fit. If it is a Dodge Ram you will have to modify the dash of the truck to allow it to fit. It is a very easy mod to do.
[ Wesley Nov 03, 2014 ]
A
I have a Kenwood DDX 470 and it fit perfectly. My guess would be any standard "double din" receiver. Takes a bit of modifying on the vehicle to fit but well worth the end result.hope this helps.
[ michael Nov 03, 2014 ]
A
Standard, 7 in screen
[ MICHAEL Nov 03, 2014 ]
Loading articles...
The plasic welds on the back of the old one are easily removed with a careful drilling I used a 1/4 inch bit and touched the welds and it pops off. Be very careful when you tighten the screws on the new one because it will break very easily on the back.
Soferio from Ohio