Works great on 1999 Frontier with Kenwood radio!

Needed this to complete my radio installation, without it there was an ugly gap around the radio. 1999 Nissan Frontier

Have questions for
?

Metra 95-7417 Dash Kit

Easy install and perfect fit!

Have questions for
?

Metra 95-7417 Dash Kit

Screw holes did not line up with Boss radio without drilling larger holes. It was fine after that.

Have questions for
?

Metra 95-7417 Dash Kit

i cant use it no function

Have questions for
?

Metra 95-7417 Dash Kit

Not necessary. Does not fit good. Will cause difficulties with bracket installation into the open space.

Have questions for
?

Metra 95-7417 Dash Kit

Fit and finish better than factory and fast delivery to boot

Have questions for
?

Metra 95-7417 Dash Kit

Installed quickly and fit perfectly.

Have questions for
?

Metra 95-7417 Dash Kit

Useless! I had already unpacked it before I realized this or I would return it. The face plate from the stereo worked better than this; at least for a 2002 Nissan Frontier.

Have questions for
?

Metra 95-7417 Dash Kit

Nice addition to the stereo. Looks great

Have questions for
?

Metra 95-7417 Dash Kit

Fits vehicle perfectly, looks like a factory install. Very happy with the product

Have questions for
?

Metra 95-7417 Dash Kit

Slightly misaligned, very delicate, but it worked.

Have questions for
?

Metra 95-7417 Dash Kit

Very flimsy. I managed not to break it. Had to find different screw to make it work and when installed still left a gap a the bottom of the radio. I'm disappointed in this product. I install my own gear and like a professional look. I could have kept my money since I still have a gap at the bottom. Installed on a 2004 Nissan Pathfinder. That bottom gap is going to drive me crazy.

Have questions for
?

Metra 95-7417 Dash Kit

Like the way it fits and looks

Have questions for
?

Metra 95-7417 Dash Kit

Satisfied

Have questions for
?

Metra 95-7417 Dash Kit

Hides the gap left by removing the old radio beautifully.

Have questions for
?

Metra 95-7417 Dash Kit

Pretty easy. Works very well.

Have questions for
?

Needed for any installation

It fit well and made the installation look professional.

Have questions for
?

Metra 95-7417 Dash Kit

This dash kit would have nicely filled the small gaps around the new radio but would not work for my installation. Method of installation in my case forced radio mounting brackets out of alignment.

Have questions for
?

Didn't fit as expected

Didn't fit as expected. Will eventually need to cut a piece off in order to access the USB/AV ports.

Have questions for
?

Minor mods needed.

The oval mounting holes on the side brackets needed to be enlarged and made round to work properly with the recessed mounting holes in the factory mounting brackets, otherwise the side brackets would have broken upon tightening down the screws. I used a Dremel tool to enlarge the holes. I'm installing a Kenwood DPX503BT in my 2003 Nissan Xterra.

Have questions for
?

Fragile

Breaks very easily when removing packaging. Doesn't fit well with radio. Wound up not using it. Radio still looks good without it.

Have questions for
?

Wont fit without modification

Installed a Kenwood Excelon DPX593BT in an '04 Nissan Xterra. The trim plates that came with the head unit would not fit in my dash, so this part was necessary to make the install look decent. Unfortunately, this kit didn't fit on the head unit when using the vehicle's stock mounting brackets, per instructions. I was able to make them work with some modification using a dremel tool. Overall, it was dissapointing, and time that could've been spent otherwise if the product had been designed better to begin with.

Have questions for
?

Metra 95-7417 Dash Kit

It was nice to have but it didn't fit in my application.

Have questions for
?

Metra 95-7417 Dash Kit

Very Flimsy, you've seen that over and over again on these review, mine broke taking it out of the plastic. I just purchased another one. I will have to be very careful this time. They could have made this with a more dense piece of plastic, like the one I got for my Lincoln Aviator which fit perfectly. This one is garbage compared and now I'm spending more money.

Have questions for
?

Metra 95-7417 Dash Kit

Does not fit correctly.

Have questions for
?

JVC

Nice piece. Fit was good.

Have questions for
?

Not my favorite item ever.

This didn't work as well as everything else from Crutchfield in an install kit does. The tabs for attaching the shroud to the radio wouldn't work based on the formed bends in the brackets that go from the radio to the vehicle. It made the whole thing way out of wack. Also, the thinness of the material in the center lead to it breaking as I took it out of the bag. (a little glue fixed that). We just installed it without the attachment tabs and it looks fine and stays put.

Have questions for
?

Metra 95-7417 Dash Kit

My vehicle is a 1998 Nissan Frontier King Cab 4x4. The radio I installed was a JVC KW-R930BTS. The bracket pieces of this kit were too thick for the screws from the OEM radio so I did not include them but placed the rectangle around the radio before putting the vehicle trim back on. The plastic rectangle is very thick (comparatively) and made the trim continue to pop back out. I trimmed the portion where the rectangle was to connect to the plastic brackets because that is where the trim is the thickest. That seemed to help some. I have my fingers crossed that, in the pothole state (Oklahoma), the trim doesn't pop off when I hit one of these things. I tried not using the trim but the install does not look complete without it.

Have questions for
?

Metra 95-7417 Dash Kit

Very flimsy Break very easily

Have questions for
?

Metra 95-7417 Dash Kit

Did not fit my 2003 Nissan Xterra dispite being listed as an exact fit.

Have questions for
?

Caution Fragile!!

Very fragile, broke one of the sides pulling it out of plastic. Other than that it serves it's purpose.

Have questions for
?

Metra 95-7417 Dash Kit

The hardest part was removing the old bracket screws from the stock radio. After the "60 foot-pound" rated electric impact driver didn't cut it, I hit my hammer-powered impact driver and finally succeeded.

Have questions for
?

Metra 95-7417 Dash Kit

Flimsy plastic, arrived broken, good thing it was free

Have questions for
?

Metra 95-7417 Dash Kit

It was so fragile, I couldn't get it out of the package without breaking. Completely disappointed. Good thing it was free.

Have questions for
?

Metra 95-7417 Dash Kit

worked great.

Have questions for
?

Metra 95-7417 Dash Kit

A little flimsy, but worked fine, filled the gap and looks good.

Have questions for
?

Cheep

Cheap plastic. Good thing I did not need it.

Have questions for
?

Metra 95-7417 Dash Kit

Seems to fit great. A little flimsy and easily broken but does the job if you're careful.

Have questions for
?

Great fit

It was a perfect fit for our 2002 Frontier. It gave our upgrade a clean, custom finish.

Have questions for
?

Didn't work well for me

Broke just trying to get it out of the package. Very thin and delicate. When went to install didn't fit all that well so just left it with no bracket and it looked better

Have questions for
?

Metra 95-7417 Dash Kit

Easy install. Made it look nice

Have questions for
?

Metra 95-7417 Dash Kit

Very cheap. I was not impressed because it was so thin and could break very easily. I paid good money for this product. Not happy with it at all

Have questions for
?

Metra 95-7417 Dash Kit

It is a nice frame, but very flimsy plastic that broke by me taking it out of the bag, didn't end up even needing it with my purchase, it looks fine without it

Have questions for
?

Nissan Dash Kit

This item is junk. The material is too fragile. Breaks too easy. Didn't fit my stereo purchase properly.

Have questions for
?

more like s trim ring

I have a Gen 1 Nissan Xterra. I got this free with the purchase of a Blaupunkt San Antonio Double Din radio. This is NOT a mounting kit, but a dash trim to cover the small gap left with the new radio. The factory brackets will fit the side of the new radio to allow install. When the factory dash cover goes back, there was a gap on the lower portion that needs to be covered. That's what this is supposed to do. But the brackets that came with the kit will not clear the lip around the new radio so they can't be used. The "ring" isn't the right size to allow the factory dash to snap back and required extensive trimming. Since the "ring" isn't being held down, I ended up having to silicon glue the portion to make it stay. It covered the gap, but isn't really that good looking. I may need to find something else later.

Have questions for
?

Metra 95-7417 Dash Kit

Of course it's all thin cheap plastic. The radio I bought came with a plastic rim cover. So I bought this didn't even use it.

Have questions for
?

Metra 95-7417 Dash Kit

A bit flimsy and the instructions/diagrams were not in great detail. This was the part that I had the most confusion with as it does not fit flush with the vehicle mount brackets and the radio

Have questions for
?

Kit does not fit right out of the package

Holes on side brackets do no line up with holes in receiver. I had to elongate the holes vertically to fit. All I got was this frame and nothing to mount the radio in the vehicle. Instructions say to use the brackets from the factory installed radio and that radio was replaced before I purchased the vehicle. There should be a note or warning when you put this radio in your shopping cart for the vehicle I specified.

Have questions for
?

Metra 95-7417 Dash Kit

Glad it was free.

Have questions for
?

Metra 95-7417 Dash Kit

Looks good, but cause problem after you install dash kit you can not put main face cover not fit I had too take dash kit out and black tape to cover around hole.

Have questions for
?

installation kit

Loved the radio and the wiring harness, but there was no way the brackets that came with the radio or the supplied kit would work. Instructions said use original mounting bracket with the kit.. nope not happening, I had to modify the original bracket to meet the hole in the radio... works now but not the easy install I am use to with your products

Have questions for
?

Does not fit

I purchased a Kenwood DDX372BT for my 1997 Pathfinder SE in which the site suggested for me to throw this in as a kit in order to make it fit to me car. Turns out that when I went to get it installed the Dash kit was too big in which the stereo had a big hole.....now I have a stereo installed in the car which moves freely.

Have questions for
?

Dash Kit Needs Improvement

This product needs a do-over

Have questions for
?

OK Product

A bit flimsy, but did the job closing the gap between the dash and the radio. Looks good once installed.

Have questions for
?

Clean look.

Provided a nice finish for new head unit in my 2004 Frontier.

Have questions for
?

Metra 95-7417 Dash Kit

Only thing that didn't fit the way it should.

Have questions for
?

Cheap item

Very flimsy and cheap. Poor install instructions. It gets the job done, but is nothing special.

Have questions for
?

Just okay...

I give almost everything 4-5 stars, but sorry, I can't do it here. The Metra 95-7417 Dash Kit fits the aftermarket radio I purchased for my son's 2004 Nissan Frontier, but you have to reuse the two metal mounting brackets that came on the OEM radio. The kit is cheaply made. A real flimsy plastic. I guess it was a good thing as it had to be bent over the flanged part of the metal brackets. Also the holes really didn't line up very good. This caused a bow in the facing part of the kit. Fortunately, once the radio was installed, the facing piece was sandwiched between the radio and dash, so the bowing was gone. Because it works, I'll give it two stars, but this kit could use some improving.

Have questions for
?

Works but not a perfect fit

The Metra 95-7417 Dash Kit worked for my application (1999 Infiniti QX4) but the mounts did not line up correctly with the mounts on the head unit ( Pioneer AVH-4800BH) so I had to alter them slightly to get them to fit. Overall design is very fragile/flimsy so care has to be taken when installing it or you could easily break it.

Have questions for
?

Good

Good

Have questions for
?

Awesome kit

Works well, fairly adaptable. Had to trim mine a bit, but im pretty crazy about detail

Have questions for
?

Poor design

The design is such that the mount stems have to be bent over the original radio mount bracket that must be reused.

Have questions for
?

Metra 95-7417 Dash Kit

Was not an exact fit but filled in void pretty Good

Have questions for
?

Perfect

This gave my new stereo a perfect fit in my already awkwardly shaped dash board.

Have questions for
?

Bad

Arrived broken. Very flimsy and doesn't fit my 1998 Nissan Pathfinder.

Have questions for
?

Junk

Junk, flimsy and did not fit with brackets had to grind and re drill brackets to fit over this

Have questions for
?

I don't think it was necessary

This is a very poorly made product and does not fit well. I used it but I really don't think I should have bothered

Have questions for
?

Fits Like a Glove!

A necessary product for the best fit for new stereo!

Have questions for
?

Not needed on 2002 Xterra w/NX404

Fit of Clarion NX404 in 2002 Nissan Xterra was so close, trim bezel not really needed, and so close there probably wouldn't be room anyway, only .25" gap at bottom of NX404, filled with strip of dark gray foam stuffed in, looks fine, but not even that necessary)

Have questions for
?

Metra 95-7417 Dash Kit

This part worked perfectly and looks great. I am very happy with part

Have questions for
?

Flimsy

Not the best directions and not a very high quality piece, although it does what is was designed for.

Have questions for
?

could get it to work right

Its a nice part but was not able to bolt it to the radio using side brackets so I just put it loose on front of radio and mounted face

Have questions for
?

Great

Great help in the Installation

Have questions for
?

Sweetness

Very nice. The team at crutchfield hooked me up with everything I needed to install my new deck without any problems , Thanks again guys

Have questions for
?

Perfect fit

Perfect fit. Looks good.

Have questions for
?

Fine

It was OK, fit fine, but felt pretty flimsy..

Have questions for
?

dissappointing

cheap piece of plastic that actually broken when trying to remove from packaging.

Have questions for
?

Metra 95-7417 Dash Kit

Good item that helped install the radio.

Have questions for
?

Does not fit

Does not fit in a 98 Nissan Frontier.

Have questions for
?

Perfect

Worked Perfectly

Have questions for
?

Metra Receiver Kit

No problems installing in a 2002 Nissan Frontier.

Have questions for
?

Dash kit

Didn't fit using the supplied adapter in my 1997 Nissan Maxima. No room on the side of the stereo for the brackets. Left the side pieces off and just went with the plastic ring and it fit and looks good. Fits snug with no rattles.

Have questions for
?

Does what it needs to do.

Very easy to install and gives the unit a polished look. I would definitely use it again.

Have questions for
?

fit perfectly

This trim peice fit in place and filled the dead space around the head unit and the dash opening perfectly.

Have questions for
?

Fragile: Handle with Care

The trim ring broke as I removed it from package. I recommend to cut the package open, as the "chip bag" technique resulted in broken product. Gorilla glue fix. Fits Xterra better without the mounts. A misalignment caused deformation of the ring.

Have questions for
?

I would have

My receiver came with a "frame" so I ended up using that one instead. I held this meta frame to that from the Pioneer unit and I could not tell any differences. The thickness and quality were nearly identical. The Pioneer's frame just matched the sheen of the Pioneer unit just an edge better was the final determinant in using the PIoneer's kit.

Have questions for
?

Wrong product

Purchased for a 2001 Nissan Frontier per Crutchfield's application guide. Doesn't fit. Not even close.

Have questions for
?

in Dash Reciever kit

The product worked as promised and was delivered as promised! It worked great and was at a great price!

Have questions for
?

Very cheaply made

I ended up not using it because it broke on me, Very cheaply made.

Have questions for
?

Install Kit

Work, but had to be modified. Side brackets interfered with install in my sons '99 Maxima and had to be modified to work.

Have questions for
?

For Perfect Finish

A must have for a professional fit/finish when installing an after-market head unit.

Have questions for
?

worst!!!

doesn't work on a 2002 Frontier lefts a gap on top n the bottom

Have questions for
?