Ok, had to grind down the screw heads.
Andrew from AMERICAN FORK, UT on 1/3/2023
2001 Mazda Miata
It works ok. Depending on your application, you will throw half of it away. The screws are too thick to easily mount the radio in a 2001 Miata. In their defense, I tried to buy thinner but could but find any. Instead I used my grinder to take some of the metal off of the screw heads to make them thinner. With the thinner heads the radio binds a little bit, but does slide in.
Pros: Works okay.
Cons: Many extra parts. Screw heads are too think.
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Clarke from Essex , CT on 11/29/2022
1999 Mazda Miata
Kind of flimsy plastic. Not designed to be easily removed once installed. In my car (99 Miata) you have to partially dissemble the dashboard.
Pros:
Cons:
0 of 0 found this helpful
Cheap but gets the job done
Quang from Houston, TX on 9/20/2022
2001 Mazda Miata
honestly feels a little flimsy and cheap, but for the price point you can't expect more. it does the job with no fitment issues so i cant complain. mine in particular came bent but that could be a shipping problem and not a product failure. it easily bent back into shape.
Pros: cheap, works as intended
Cons: feels a bit flimsy
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Guest from Plano, TX on 9/8/2022
2000 Mazda Miata
Does not fit NB Miata. The product also feels extremely cheap. I hate that they come with this and not even fit
Pros:
Cons: Everything
0 of 0 found this helpful
2003 mazda protege5
Leif from Miami, FL on 7/21/2022
2003 Mazda Protege5
It works for 2003 mazda protege5..just trimmed the middle plastic.and fits perfectly for double din unit.
Pros:
Cons:
1 of 1 found this helpful
Metra 99-7505 Dash Kit
James from Shreveport, LA on 7/11/2022
2001 Mazda Miata
Looks like a very good product but I did not need it for my 2001 Mazda Miata. The radio fits perfectly in the opening without any install kit.
Pros:
Cons:
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Nancy from Ellenton, FL on 7/11/2022
2002 Mazda Miata
Simple snap and set. I've seen reviews for the double-din fitting where there is concern about removing the thin bar the middle. This is nothing an X-ACTO can't handle, an emery board can make quick smooth out. Looks pro.
Pros:
Cons:
0 of 0 found this helpful
Perfect fit for my 2000 Mazda Miata!
Ibzan from Hawthorne, FL on 2/22/2022
2000 Mazda Miata
0 of 0 found this helpful
Miata Metra Dash Kit
Crutchfield customer from Summerfield, NC on 12/22/2021
Fit my 2001 Miata perfectly. Easy install, great quality.
Pros: Perfect fit, professional look
Cons: None
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Crutchfield customer from Sioux Falls, SD on 8/14/2021
2004 Mazda Tribute
Works well for what it is. The instructions said to assemble the bezel and the arms, then attach it to the radio. It was much easier to attach the arms to the radio, then snap the bezel into place.
Pros:
Cons:
0 of 0 found this helpful
Stoutly Built
Crutchfield customer from Oklahoma City, OK on 6/11/2021
2002 Mazda Miata
This is some tough plastic. The opening wasn't big enough for the 100x178mm face of the head unit I bought. So I built a jig to hold it securely and got out my file collection. A couple hours later it fit perfectly. The unit is only about 3 inches deep and weighs next to nothing so I had no worries about the rear support. Also had to make new holes in the side brackets since the new unit is so shallow. No biggie for me.
Pros:
Cons:
0 of 0 found this helpful
It's free with a purchase!
Crutchfield customer from Cape Coral, FL on 5/9/2021
2002 Mazda Protege5
Honestly, I never had to use mine. It came free with my purchase. Better to have it than not though.
Pros: It's free with purchase! Better to have it than not at all.
Cons: None.
0 of 0 found this helpful
Good kit
Crutchfield customer from York, PA on 5/9/2021
2002 Mazda Miata
It was easy to get my receiver mounted with this kit. Made a nice, neat, attractive installation.
Pros:
Cons:
0 of 0 found this helpful
Love it !
Crutchfield customer from Palmetto, GA on 5/2/2021
2002 Mazda Miata
Love this stereo housing kit ! Works for a single or double din, looks great in my '02 Miata SE. the rear support needs hardware to attach to the stereo so make sure you have that.. I didn't and just installed it without the rear support but it works just fine.
Pros:
Cons:
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Crutchfield customer from Tacoma, WA on 4/17/2021
2006 Mazda Tribute
Simple piece but it really puts the finishing touch on an install. I really like how it kept the headunit flush with the dash - rather than looking stuffed in a hole - in an old F150. This is not absolutely necessary for an aftermarket install in a single din opening but it makes it look right.
Pros:
Cons:
0 of 0 found this helpful
Effective head unit install kit
Crutchfield customer from Apollo Beach, FL on 4/4/2021
2003 Mazda Miata
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Crutchfield customer from Ephrata, PA on 2/11/2021
2000 Mazda Protege
Exactly what I needed perfect fit and simple install cannot complain one bit
Pros: Makes life so much easier when it's exactly what you need
Cons: None
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Crutchfield customer from Seattle, WA on 12/15/2020
2004 Mazda Miata
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Crutchfield customer from Etna, NY on 12/5/2020
2000 Mazda Miata
Thanks, I guess? Did not see a reason to use most of this kit - my Miata dash plastic received the Sony receiver fine. The one piece I did use - the little boss that sticks out the back of the radio to mate with a frame to prevent flopping up/ down - didn't have a threaded stud to mate it to the back. Had to jury-rig with a cut-off machine screw from my stock.
Pros:
Cons:
0 of 0 found this helpful
Disappointed
Crutchfield customer from Macon, GA on 11/4/2020
2003 Mazda Miata
It works ok, but the included peg for the back of the radio to rest on the dash support was horrible. The instructions said to put the cap on top of some screw, but didn't include a screw. I had to drill a hole into the heat sink on the head unit and screw in the peg from the OEM radio.
Pros: It fits in the dash
Cons: Dash support peg is bad
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Crutchfield customer from Indian Trail, NC on 10/7/2020
2003 Mazda Miata
It works, but there are some significant areas for improvement. When cutting the center divider piece out for a double din radio, the texture is different after you cut. So if your radio doesn't stick out far enough, you'll always see where you cut the divider. It would have been ok if the side pieces allowed you to mount the radio far enough forward, but it doesn't. I ended up filing the holes a little bit so that I could bring the radio far enough forward to cover up the cut marks. It's not perfect and most people will never notice it, but I can see it and it bothers me.
Pros:
Cons:
1 of 1 found this helpful
Metra 99-7505 Dash Kit
Crutchfield customer from Suwanee, GA on 10/6/2020
2001 Mazda Miata
Kit fit in like a glove - snapped right into place
Pros:
Cons:
0 of 0 found this helpful
Mandatory
Crutchfield customer from Decatur, AL on 5/20/2020
2002 Mazda Miata
Don't even try to install without this kit. With - easy installation and clean appearance. Without - !@#$%^& !!
Pros:
Cons:
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Crutchfield customer from Yorktown, VA on 5/14/2020
2004 Mazda Miata
This works great in any NB style Miata. Comes with everything to install a single din or double din unit.
Pros: Works. Looks decent.
Cons:
0 of 0 found this helpful
Nice
Crutchfield customer from Waukegan, IL on 4/27/2020
2002 Mazda Protege
Easy to install and yielded a professional looking installation
Pros: Easy to use Looks good
Cons: None
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Crutchfield customer from Newport News, VA on 2/26/2020
2004 Mazda Miata
0 of 0 found this helpful
Fits as intended
Crutchfield customer from Wesley Chapel, FL on 1/10/2020
2002 Mazda Miata
Almost perfect for the Sony double din unit intended on a Miata 2002. The sony does not provide for the back support but I was able to improvise. Otherwise fits and looks as intended.
Pros: Works as intended
Cons: Does not support sony unit on the back
0 of 0 found this helpful
Good Butt
Crutchfield customer from Waukegan, IL on 9/11/2019
2002 Mazda Miata
Good kit, may have to make minor adjustments. All parts not included in my kit.
Pros: Easy to follow instructions
Cons: All parts not included in my kit
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Crutchfield customer from Sacramento, CA on 8/22/2019
2002 Mazda Protege
Perfect fit and easy to install, looks great.
Pros:
Cons:
0 of 0 found this helpful
Fits the Miata 2003 model Pioneer AVH 4000 NEX
Crutchfield customer from Port St Lucie, FL on 7/7/2019
2003 Mazda Miata
Dash kit fits the 2003 Miata perfectly with a pioneer 4000 NEX double din.
Pros:
Cons:
0 of 0 found this helpful
Does what it needs to for double-DIN install
Crutchfield customer from Spring, TX on 7/2/2019
2001 Mazda Miata
Functional, seems to hold in place, but it is designed to fit all manner of head units, so there are a few things to mention. 1) the cross-bar in the double-DIN bezel must be removed, and it will require some cleanup and a little fine file work to make it as unnoticeable as possible; 2) the side pieces are the same, relatively soft plastic, and you will need to use screws from your original or replacement unit to attach them. They need to be relatively tight to keep the unit from moving during installation, but really tightening the screws will deform the pieces and probably some risk of breakage. 3) It does click in once everything is together, and Crutchfield does advise that it may not come out well if you need it to. (I actually used a thin spatula successfully because with all the almost-in/out stuff I did adjusting the SLC-4 levels I managed to dislodge the microphone plug, apparently. (Don't be like me, but make sure to re-test *everything* before final install, not just the last thing you were working on.)
Pros: Hey, it works!
Cons: It is all plastic, and you need a little TLC to remove the center bar cleanly if you using it for a double-DIN head unit. Crutchfield advises it may not be removable in one piece, so it may be single use. Proceed accordingly with your install.
1 of 1 found this helpful
Doesn't fit well
Dwaine from Athens, AL on 2/7/2019
1999 Mazda Miata
Does not fit my JVC double din radio very well AT ALL
Pros:
Cons: doesn't fit well - the side screws don't match up.
1 of 1 found this helpful
Too Confusing For Me
Brian from Medway, MA on 1/11/2019
2005 Mazda Tribute
I am glad this kit was a free add on to my order. The kit comes with multiple pieces to accommodate different installs. My problem was the instructions were confusing and there was a statement on the instructions that said "Once the radio clicks in, it may not be able to be removed without dashboard disassembly." I want to be able to remove my new radio easily like my stock radio was. I was able to use my new radio's housing which allows the radio to be removed.
Pros: Kit accommodates different radios Was included with the radio purchase
Cons: Confusing instructions May have to disassemble the dash in the future if you use the kit Not necessary for my install
0 of 0 found this helpful
Metra 99-7505 Dash Kit
John from Ephrata, PA on 1/3/2019
2003 Mazda Protege5
Worked amazing! Makes the radio look like it was factory installed. Fast shipping. Very impressed!
Pros: Fits perfect and snug. Looks factory
Cons: None
0 of 0 found this helpful
Perfect!
Jake from New Brighton, MN on 11/11/2018
2006 Mazda Tribute
Great item for a professional-looking installation!!! Perfectly simple..... LOL
Pros:
Cons: None
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Crutchfield customer from Tamarac, FL on 9/26/2018
1999 Mazda Miata
It does the thing! Looks fine in my 99 Miata. Seems to have installed securely. No jiggle or rattles. The radio does have a 2-3 mm flushness mismatch on the front of my JVC unit, but I am picky. Most people immediately comment how factory the install looks.
Pros:
Cons:
0 of 0 found this helpful
poor fit
John from Williston Park, NY on 3/26/2018
2003 Mazda Miata
Very poor fit for my radio.Very flimsy ,offered no security.
Pros: none
Cons: plastic with poor fit
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Jim from Downingtown, PA on 3/25/2018
2001 Mazda Protege
Perfect. It contained everything needed to do the job right.
Pros:
Cons:
0 of 0 found this helpful
Excellent buy great fit easy assembly..
Michael from Waterbury, CT on 3/12/2018
Excellent dash kit set.. Assembled quickly...cover plate fit my Dash perfectly...radio is tight and secure... Very satisfied. Would recommend.
Pros: Value...easy assembly and perfect fit.
Cons: Nothing so far..
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Brian from Sebring, FL on 3/5/2018
2001 Mazda Millenia
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Crutchfield customer from Kailua Kona, HI on 2/17/2018
2001 Mazda Miata
1 of 1 found this helpful
Install asier than expected
Hadley from Kaysville, UT on 2/5/2018
2002 Mazda Protege5
The thing worked perfectly. I had always been nervous about trying to install one of these but after reading reviews I finally decided to try it out. Piece of cake with these parts and the included instructions. Turned out really nice!
Pros:
Cons:
0 of 0 found this helpful
Nice looking, but not good for Sony touchscreen units
Shaun from Marshfield, MA on 2/3/2018
2003 Mazda Miata
This is a nice looking mount, but if you have a Sony XAV100 it's not ideal. The screw openings hold the head unit just fine until you have it installed and order on the screen. This is due to the openings for the screws having nothing to push against the head unit will slowly sink into the dash while the mount stays put. I'm trying to find an alternative mount or have someone 3D print new side panels specifically for this unit.
Pros:
Cons:
1 of 1 found this helpful
Metra 99-7505 Dash Kit
cliff from Churubusco, NY on 12/11/2017
2003 Mazda Tribute
Didnt need it for a 2003 mazda tribute
Pros: Great if u need it!
Cons:
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Crutchfield customer from Phoenix, AZ on 10/24/2017
2003 Mazda Miata
Dash kit fits perfectly. Used the single din so I picked up some storage. Install doesn't look like a after market install.
Pros:
Cons:
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Audie from Alliance, NE on 8/29/2017
2003 Mazda Tribute
For all who are saying the install kit is cheap, and should only send 1...first off, Crutchfield sends this to you for free, and shipped free. Of course it's not the best quality, and maybe a little deceiving. But they don't have to send you a free kit either. If installed correctly, you'll see that the integrity of the material is in the shape, and works with other parts to become stronger. They wouldn't send you an item, that could potentially damage the vary item you purchased from them, only to return it all, and or product insurance claim. I think its great that they do this, and more companies could take notes from this one. Thank you Crutchfield.
Pros: FREE, dual optional, color match, fits perfect.
Cons: If you're not happy, just buy a different one
1 of 1 found this helpful
Functional dash kit
Dan from Brea, CA on 7/6/2017
2003 Mazda Tribute
I wasn't sure if this would fit. The instructions were minimal. The material is plastic and not heavy duty, but it works. The color doesn't stand out.
Pros: Fits my receiver and dash opening.
Cons: Not heavy duty material.
0 of 0 found this helpful
Charles Barkley Would Call This "Turrible"
Crutchfield customer from Dayton, OH on 7/5/2017
2005 Mazda Tribute
This thing sucks. They had to send me 3 of these dash kits for one to get to me that wasn't broken before I even opened the box. Unfortunately, it's the only practical option out there for a lot of people. Feels cheap, looks cheap, is cheap. Not as snug as one would expect either. I don't know why 0 stars is not a selectable option right now.
Pros:
Cons: Doesn't Ship Well, Cheap, Not a Snug Fit
0 of 1 found this helpful
Metra 99-7505 Dash Kit
Dana from Nashville,Tn. on 6/4/2017
2001 Mazda Miata
Excellent fit and finish.
Pros: Great fit and finish.
Cons: None.
0 of 0 found this helpful
Works
Chase from College Station, TX on 5/28/2017
2002 Mazda Protege5
Works well, except if you have a double din because you have to cut the bar out of the middle and it's isn't as clean looking.
Pros: Does it's job Fits receiver well
Cons: Have to cut out middle bar for double din, not clean It's snapped in place but it's just a little weird.
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Crutchfield customer from Gainesville, FL on 5/23/2017
2000 Mazda Miata
Bezel for unit fit great; however, the side piece adapters did not fit well to unit at all. Made installation more cumbersome.
Pros:
Cons:
1 of 1 found this helpful
Metra 99-7505 Dash Kit
Crutchfield customer from Cape Coral, FL on 4/4/2017
2001 Mazda Protege
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Crutchfield customer from Chicago, IL on 2/23/2017
2001 Mazda Tribute
Not the best fit. I guess is it a generic product. I am not happy with the fit. not as snug as I would hope
Pros:
Cons:
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Crutchfield customer from Charleston, sc on 2/3/2017
2001 Mazda Miata
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Crutchfield customer from Edmond, OK on 1/3/2017
2003 Mazda Protege5
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Crutchfield customer from Kennewick, WA on 12/14/2016
2002 Mazda Protege5
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Alex from Whittier,ca on 11/14/2016
2002 Mazda Protege
Fits ok but when installed to audio unit it gets deformed appearance is poor
Pros: It was free with the unit
Cons: Doesn't fit very good, looks cheap
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Crutchfield customer from Sevierville, TN on 11/13/2016
2003 Mazda Protege
great fitment easy to install. shipping was outstanding as usual.
Pros: easy installation
Cons: none
0 of 0 found this helpful
Could be better...
Crash from San Luis Obispo, CA on 10/16/2016
2002 Mazda Miata
Does what it's made to do I guess. You have to cut out the black plastic in the middle if you're installing a Double Din head unit system. I only needed one of the many supplied pieces to get it in my car. So you're left with a bunch of extra unnecessary pieces. It was also a pain getting it to set in my dash, but that could just be my inexperience. Otherwise, looks great and does what it's supposed to do.
Pros: Looks great when implemented
Cons: Too much extra stuff, hard to place in dash
0 of 0 found this helpful
A fine product
Ian from Stroudsburg PA on 8/7/2016
2002 Mazda Protege5
my items came in a timely manner and easy to install I was very satisfied with it
Pros: it is a great product and Crutchfield is a great company to deal with
Cons: N/A
0 of 0 found this helpful
Dash kit
Gil D from Kilauea, HI on 6/27/2016
2005 Mazda Tribute
0 of 0 found this helpful
Works but...
Woodio from CT on 6/16/2016
2001 Mazda Miata
It worked and made the new receiver easy to install. But it is cheaply made and the cubby has holes in it. I'm afraid something small can slip right into the dash. It includes parts for both a single and double DIN setup
Pros: Cost
Cons: Holes in compartment, okay finish on plastic, not sure if it will break if I ever have to dissassemble
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Cameron from El Paso, TX on 4/20/2016
2002 Mazda Miata
0 of 0 found this helpful
Metra 99-7505 Dash Kit
anon from Minneapolis, MN on 3/28/2016
2003 Mazda Protege
It fit in the double-DIN opening in my car. It snapped in place after a few tries. Looks clean.
Pros: My replacement stereo is single-DIN, so I like that this turns the extra slot into a storage cubby. I can fit my phone and USB cable in there.
Cons: The snap fit of the unit in the dash opening did not inspire confidence that everything would remain securely in place. Time will tell. I'm not sure why the storage cubby has holes in the back.
0 of 0 found this helpful
Dash Kit 2003 Mazda Tribute
Farris from Santa Cruz, CA on 2/3/2016
2003 Mazda Tribute
a huge waste of plastic! The pieces needed for my vehicle was the Double din, and I was sent enough to install 2 cars! Also the double din piece was not good quality I actually went to a stereo installer to get a better kit.
Pros:
Cons: Should only send what is needed. i.e. for double din...send double din only...single din...same. Double din had a cross bar that needed to be cut out leaving marks where it was attached. side pieces were hard to fit and hold as the face piece only connected via some hooks.
0 of 1 found this helpful
Looks stock in a Miata
DanM from Illinois on 1/17/2016
2002 Mazda Miata
I used this to finish off an install of a Pioneer HU into a 2002 Miata and the install looks stock.
Pros: Fits great into the dash
Cons: Had to modify some of the mounting holes on the side plates. No big deal just be ready
0 of 0 found this helpful
Worked great
Crutchfield customer from California on 12/6/2015
2002 Mazda Protege
Had my doubts after reading some negative reviews online, but the install kit worked great. Took a little fiddling to get it right, but no big problems.
Pros: Worked as expected.
Cons: A little fiddly, but no big deal.
0 of 0 found this helpful
Perfect fit
Matthew from Pell City, AL on 11/23/2015
2004 Mazda Tribute
0 of 0 found this helpful
Dash kit - single and double din.
MAH from Indiana on 10/16/2015
2001 Mazda Protege
Easily converted my 2001 Mazda Protege double din unit to my JVC single din replacement.
Pros: Worked as intended.
Cons: Non.
0 of 0 found this helpful
2002 mazda protege
Scott from henderson, nv on 10/12/2015
2002 Mazda Protege
Fit into place (replaced factory double din for a single). Instructions were good, pretty simple to figure out. The back support didn't fit on to pioneer radio. But thats the radio fault.
Pros: fit great and snug
Cons: people that complained about it.
0 of 0 found this helpful
Fits with no problems in Mazda Protege5
AviT from Oregon on 9/17/2015
2003 Mazda Protege5
Bought this to install a single din head unit in my wife's 02 Mazda Protege5, which has a double din opening. It fits perfectly with no cutting.
Pros:
Cons:
0 of 0 found this helpful
Good unit
John from Arkansas on 9/2/2015
2005 Mazda Miata
Does what it should
Pros: Does what it should
Cons: Requires trimming
0 of 0 found this helpful
2005 double DIN MX-5
Miatapilot from Arkansas on 8/18/2015
It worked reasonable well, but required quite a bit of trimming to get the Pioneer AVH-4000NEX to fit and open properly. I even had to buy a second one to get the fit I wanted.
Pros: fairly easy to cut with a Dremel tool.
Cons: I had to trim it with a Dremel Tool to get it to fit well
1 of 1 found this helpful
pat k
Crutchfield customer from Vermont on 6/1/2015
2001 Mazda Miata
0 of 0 found this helpful
Perfect fit
DarrenR from Blaine, WA on 4/27/2015
2000 Mazda Miata
Easily installed and made the installation look like stock. Very pleased.
Pros: Easy installation, professional results
Cons: Finish slightly more matte than the rest of the dash but barely noticeable
0 of 0 found this helpful
Fits perfectly
JeremyG from Pennsylvania on 3/29/2015
1999 Mazda Miata
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Sam from Texas on 3/21/2015
2002 Mazda Protege
This installation kit was unbelievably easy to use and to install in our 2002 Mazda Protege. The kit fit perfectly and looks great with our new stereo. No extra hardware was needed. Only a matter of pulling the OEM factory radio out and slipping this one in to hold the new stereo very securely. Comes complete for both Single and Double DIN for any type radio and a cubby for my sunglasses. This kit makes my new radio look like a factory installation. Nice!
Pros: Clear instructions and very easy to install.
Cons: none
1 of 1 found this helpful
Metra 99-7505 Dash Kit
Chuck from The "D" on 3/14/2015
2000 Mazda Miata
Nice kit, install made easy. Great deal.
Pros: easy install.
Cons: none
0 of 1 found this helpful
Just what was needed
Anthony C. from North Carolina on 2/24/2015
2003 Mazda Miata
Needed this to install the new JVC unit in my wife's Miata and it was just what was needed. Fit perfectly. Can't beat Crutchfield.
Pros: Looks great and sure made the install a Lot easier. Oh and now the wife has an extra "cubby" to stow stuff in her car. That's always good.
Cons: None at all.
0 of 0 found this helpful
Kit
John from Blairsville Ga on 10/19/2014
Looks Great !
Pros: Works great
Cons: Directions could be a little better but I was able to figure it out !!
1 of 2 found this helpful
2002 Mazda Protoge Double Din
Lucas from Kansas City, MO on 10/3/2014
2002 Mazda Protege
The side brackets did not line up with my screw holes so I took a dremel tool and made my own (probably ended up better that way). The dimension vertically was spot on but horizontally was about 1/16 in to wide. Had to cut out the extra space from the original mounting in the car (behind the trim). It just slid into place and snapped when correctly positioned. All in all was really easy to work with and I am pleased with the outcome. I would recommend that anyone who uses this to make sure that you get at least 2 heavy screws on each side due to how light the plastic is.
Pros: Fit was good. Once it was in place it seems to hold together very solid.
Cons: Holes did not line up to stereo. (I was using Alpine CDE-W235BT, able to create my own though). Plastic was rather soft, wish it was metal.
2 of 2 found this helpful
Perfect
erica from Fort Worth TX on 9/8/2014
2002 Mazda 626
It fit my 2002 mazda 626 perfectly. Easy to install.
Pros:
Cons:
1 of 1 found this helpful
this is ok
Crutchfield customer from Iron, mn on 6/14/2014
2001 Mazda Protege
This item is kind of cheap. Had to cut parts off to make it fit and had to use washers to get the screws to hold it on and doesn't quite fit the car right either but it works.
Pros:
Cons:
1 of 1 found this helpful
Miata good fit
Dan from Easton pa on 6/6/2014
2003 Mazda Miata
2 of 2 found this helpful
Good product
E1mariem from Rives Junction, MI on 5/15/2014
2003 Mazda Protege
2 of 2 found this helpful
Ugh.
bcl from Alabama on 5/7/2014
2003 Mazda Miata
This kit is very poor quality, but I could find no other alternative. Cheap plastic brackets whose holes do not line up well with the head unit. Assembling the pieces around the head unit is like building a house of cards. It's amazing that this rig holds together when it's completed, but it actually does.
Pros: Unit seems to be securely mounted in the dash.
Cons: Surround face texture does not match anything in the dash. Generic holes do not match head unit well. Plastic is poor quality that you are expected to cut if you are installing a Double-DIN.
1 of 1 found this helpful
Metra.....Junk(synonyms?)
None from Illinois on 4/24/2014
2003 Mazda Protege
Crutchfield didn't send the correct screws with purchase........two days of looking in dash hole. Screws arrived and Metra side plates did not align with unit.
Pros:
Cons:
1 of 1 found this helpful
Good fit for 2002 Mazda Tribute
Hal from Hagerstown, MD on 4/19/2014
This kit worked very well for installing in my 2002 Mazda Tribute.
Pros: Great fit.
Cons: none
2 of 2 found this helpful
install kit
walter o from woodway, tx on 3/24/2014
2003 Mazda Protege5
easy to use, a perfect fit. made the installation look like a custom job.
Pros:
Cons:
2 of 2 found this helpful
In-dash single din install
TerryG from Ashtabula, Oh on 1/15/2014
2002 Mazda 626
Was a little slow getting started and figuring out from picture which direction to slide into dash for snapping in new Kenwood. After that it was literally a snap. Fit Perfect and still looks factory installed with no gaps around trim areas.
Pros: Ease and free with Kenwood receiver.
Cons: none
1 of 1 found this helpful
not impressed
Nitram from SC on 1/14/2014
2002 Mazda Miata
well It did hold the head unit, kind of anyhow Unit started sagging, everything is light plastic without any holding strength. a few times I hat a bump in the road and the bezel went flying and the head unit came loose I replaced it with a pioneer kit and everything is golden
Pros: not much
Cons: most everything you can think of
1 of 1 found this helpful
Metra 99-7505
JoshB from Denver, CO on 1/12/2014
2002 Mazda Protege
The kit worked very well to install a double din stereo into our 2001 Mazda Protege. The kit simply snaps into the sides using friction. The deck can easily be removed, I was hoping for the kit to utilize the pin style removal the original deck had. If Crutchfield says the deck is to deep and that the rear bracket will have to be removed, the bracket does have to be cut out utilizing a tool like a sawzall and then a screw must be pulled out of the ducting. It only took an extra ten minutes but I was hoping to remove the bracket instead of cutting it out.
Pros: Quick, easy install that made the installation flawless.
Cons: Only snaps in the sides, very little security for the new deck.
1 of 1 found this helpful
Perfect for '05
Kenneth from Denton, TX on 12/13/2013
2005 Mazda Tribute
Got this for free with the purchase of my JVC NSX1 double din unit. was a perfect fit for my 05 tribute and pops out easily with a screw driver if you need to take it out
Pros: Easy install
Cons: None
1 of 1 found this helpful
Dash kit fit perfectly
corvetteviper29 from Houston, Tx on 10/13/2013
2001 Mazda Tribute
I ordered this kit for my 2001 Mazda Tribute. This kit fit perfectly without having to make any adjustments. I also like the extra storage space built in.
Pros: quick easy installation, great look, fits perfectly
Cons: None
2 of 2 found this helpful
Perfect.
Karl from Fresno CA on 10/8/2013
2001 Mazda Tribute
This fit perfect in my Mazda Tribute. My factory deck was screwed up and it took almost two hours to remove. But the new one was wired, installed and sounding great in about 15 minutes with the kits included by Crutchfield. Their tech service was great as well.
Pros: Fit Perfect
Cons: none
1 of 1 found this helpful
Metra 99-7505 Good and Bad
Crutchfield customer from Wallingford, CT on 8/27/2013
2002 Mazda Tribute
Overall a nice product to allow installation flexibility. However, the way in which the front bezel connects to the side tabs isn't very good. Have had to pull the radio back out because the clips came out from one side of the bezel and the radio pushed into the dash. Had to shim out the clips to force them to lock into the bezel.
Pros: Flexibility for various installs
Cons: Tabs that connect to front Bezel do not make good connection and Radio can push in unless you shim the clips out to ensure they catch.
1 of 1 found this helpful
Disappointed
Crutchfield customer from Mississippi on 7/5/2013
2003 Mazda Miata
The product fit, but I was expecting something a little more secure. It is so easy to get this back out of my dash after it's been installed. I'm no longer willing to leave the top down while I leave my car for 5-10 minutes anymore.
Pros: Easy installation. Good fit.
Cons: Zero sense of security.
1 of 1 found this helpful
Perfect fit
Henry from Charleston, SC on 6/19/2013
2001 Mazda 626
This kit fit my Mazda 2001 626 just fine. Thanks Crutchfield!
Pros: I had the car stereo installers take care of the installation. All I can say is that after the install the in-dash kit looks great.
Cons: None
1 of 1 found this helpful
Perfect Fit
macgeek from Charleston, SC on 5/24/2013
2005 Mazda Tribute
This was a perfect fit in my 2005 Mazda Tribute. I had one small issue but figured it out. I forgot to plug in the external mic for my bluetooth phone integration. So I had to take this back out. I ended up using 2 small flat tools, like putty knives, on the top of it. If you need to take this out, look at the picture of it and see where the tabs are, put one tool in just above the top of the kit in the center, it will bend down slightly, slide it to the left until you feel the tab and work it above the tab to release it. Leave it in place and slide the other tool in the same starting position and slide it to the right from the center to release the second tab. Then the whole kit will rotate forward and in turn release the bottom tabs. Then just slide it out.
Pros: Perfect fit, nice look.
Cons: Semi-difficult to remove from dash, but figured it out.
1 of 1 found this helpful
Great fit
Kevin from Philadelphia, PA on 5/22/2013
2003 Mazda Protege
This kit made it easy to mount my new single DIN receiver in the double DIN space of my 2003 Mazda Protege LX. I like having the pocket underneath the receiver. The mount fits securely into the dashboard and is steady with no rattling or movement.
Pros:
Cons:
0 of 0 found this helpful
Easy Fit
rbprivate1 from Greenwood, MO. on 5/20/2013
2005 Mazda Tribute
Nice finished look.
Pros: Snapped right in dash opening.
Cons: None
0 of 0 found this helpful
A Snap To Install
The2Arys from Corpus Christi, TX on 5/16/2013
2001 Mazda 626
Easy instructions and it snapped right into place first try.
Pros: Easy installation of new head unit and matches OEM.
Cons: A lot of extra parts in the kit (It was good for single AND double DIN).
0 of 0 found this helpful
It's a snap install
Rod H. from Grand Rapids, MI on 5/2/2013
2004 Mazda Miata
Installed a Kenwood DNX6190HD into my '04 Miata with the installation kit. It literally snapped into my dash, and is held secure. Looks great.
Pros: Easy installation, looks great.
Cons: Had to cut center piece out of faceplate frame for double Din head unit.. Easy work with a modeling knife.
0 of 0 found this helpful
like factory
israel from Puerto Rico on 5/2/2013
2001 Mazda Protege
a must when swap a unit
Pros: looks like OEM
Cons: nope
0 of 0 found this helpful
Fit perfectly
Chad from CA on 4/25/2013
2002 Mazda Protege
Fit my 2002 protege perfectly. Easy install
Pros:
Cons:
1 of 1 found this helpful
Metra 99-7505 Dash Kit
John from Wilburn, AR 72179 on 4/3/2013
2001 Mazda Protege
Was a perfect fit and came with more information than needed. Which rarely happens.
Pros: Lots of info product available
Cons: None
0 of 0 found this helpful
nice
rob from brentwood on 3/4/2013
2006 Mazda Tribute
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Matt from Knoxville, TN on 2/13/2013
2000 Mazda Millenia
Had to call for wiring help
Pros: Diagram almost exact.
Cons: Called to find out what the blue wires were for.
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Crutchfield customer from Bastrop, Tx. on 1/24/2013
2003 Mazda Protege
Kit installed easily except only 1 DIN removal tool supplied and 2 were required. Finished installation looks great.
Pros:
Cons:
0 of 0 found this helpful
Fit Perfect
Seth from East TN on 1/19/2013
2003 Mazda Protege5
Easy install. Worked perfect in the 2002 Protege 3
Pros:
Cons:
0 of 0 found this helpful
Mazda Installation Kit
Joe in Clear Lake from Houston, TX on 1/2/2013
2003 Mazda Protege
Simple and easy installation in 2003 Mazda Protege. Just make sure to purchase the whole schmere: DIN tools, adapter as well as this In-Dash kit.; piece of cake with JVC KD-HDR44 radio.
Pros: Eaaasy
Cons:
0 of 0 found this helpful
Kit
stegs from Tehachapi, Ca on 12/13/2012
2003 Mazda Tribute
a little difficult to work with but, snaps right in
Pros:
Cons:
0 of 0 found this helpful
Needs Improvement
Javier from Port St Lucie, FL on 12/10/2012
I bought this kit for a 2003 Mazda Tribute LX to install a double din stereo. The side brackets did not lock in to the face plate and the instructions were incorrect.
Pros: can't think of one.
Cons: shady quality at best.
0 of 0 found this helpful
Dont beleive eveything you read but this review is 100% true
Redds from Cap Hts MD from Capitol Heights MD on 9/26/2012
for a2003 Mazda Tribute order product on a wednesday recieved on Friday installed on saturday IM a VERY HAPPY customer it seams to increased the level of perfection from the manufacture speakers....wow all I can say is everyone cant be installers, let the pros handle the install., cause the product works.!!!!!
Pros: Easy to install and I love the extra space!!!!!
Cons: none :)
0 of 0 found this helpful
Mazda Kit
ERK from Georgia on 8/24/2012
2002 Mazda Millenia
I would not recommend thiks product it was not needed for my Double Din install
Pros:
Cons:
0 of 0 found this helpful
Metra 99-7505 Dash Kit
MiataGuy from Dayton, OH on 6/28/2012
I agree with RobertoP, Seattle on Monday, March 19, 2012 "The kit requires that you cut and smooth a bar that divides the double din kit. It would be better that the kit be explicit to the double DIN installation without needing modification. The side brackets did not snap into the radio surround as they should and the holes did not align well with the radio. The instructions were incorrect about the radio rear support and did not mention having to disassemble the exiting radio bracket to install." I wasted some time messing with it before callling the tech line and finding out I didn't need the rear support. It doesn't snap correctly in the opening at the top.
Pros: Looks nice and fits well
Cons: Instructions not correct and the top snaps will not stay.
0 of 0 found this helpful
Awesome product!!
William G. from Marshall, NC on 6/17/2012
2005 Mazda Tribute
It worked perfectly in our 2005 Tribute. It installed super easy, and has the added bonus of giving us an extra storage space for our ipod.
Pros:
Cons:
0 of 0 found this helpful
Mazda Protege trim kit
John from Seattle, WA on 5/28/2012
2003 Mazda Protege5
I put 3 stars as it's almost identical to the one I took out as there was a single DIN Alpine HU in there to start with so it would've fit. The JVC head unit I installed was a direct fit double DIN unit so it was needed, at all.
Pros:
Cons:
0 of 0 found this helpful
2003 Mazda Tribute
Michael W. from Macon,Ga on 5/16/2012
2003 Mazda Tribute
0 of 0 found this helpful
Great installation
Crutchfield customer from Townsend, TN 37882 on 5/7/2012
2001 Mazda Protege
Easy to use. Looks like the stereo came in the car. Perfect fit.
Pros: Easy to use. Fits perfectly.
Cons: None
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Crutchfield customer from Geneva, NY on 4/3/2012
2003 Mazda Protege5
Fit nicely into my dash. Very easy to install, just popped right in.
Pros:
Cons:
1 of 1 found this helpful
Mazda Progage
RobertoP from Seattle on 3/19/2012
2002 Mazda Protege
The kit requires that you cut and smooth a bar that divides the double din kit. It would be better that the kit be explicit to the double DIN installation without needing modification. The side brackets did not snap into the radio surround as they should and the holes did not align well with the radio. The instruction were incorrect about the radio rear support and did not mention having to disassemble the exiting radio bracket to install
Pros: It fit
Cons: The part were not to the highest standard and the instructions left much to be desired.
0 of 0 found this helpful
Did not fit
K from Salem, OR on 2/3/2012
2001 Mazda Tribute
The mounting bracket did not fit. Maybe the faces on Clarion units are oversized?
Pros: It does not take up much room in the garbage can
Cons: I did not fit. The mounting bracket does not fit over the stereo unit. I guess I should shave it down with a file?
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Gabe from Pasco, WA on 11/21/2011
1 of 1 found this helpful
Matches interior
p from Loganville, GA on 11/13/2011
2002 Mazda Protege5
The hardest thing about the install was removing the factory radio.
Pros: The matte finish worked well with the car's interior.
Cons:
0 of 0 found this helpful
it is what i thought it would be
Crutchfield customer from Chesapeake VA on 10/5/2011
Removed from the bag and snapped into place. Excellent fit for 2005 MX5.
Pros:
Cons:
0 of 0 found this helpful
Fit like a glove
Randy from Glendale, Az on 9/13/2011
2005 Mazda Tribute
Fit perfect. worked excellent with the receiver. Came with the new receiver that i ordered. Couldn't have made it easier. Very satisfied.
Pros:
Cons:
0 of 0 found this helpful
Works Great
Badbob19919 from Seattle Wa on 9/3/2011
0 of 0 found this helpful
99 MX5
Scott S from Seattle Wa on 6/29/2011
1999 Mazda Miata
Everything fig good. I had to grind down the post used to support the back side of the radio. Ohter than that it all worked fine.
Pros:
Cons:
1 of 1 found this helpful
2002 Tribute
Russ C. from Meadville, PA on 6/9/2011
2002 Mazda Tribute
Fits like a glove in an '02 Tribute and looks like a factory installation. Very pleased.
Pros:
Cons:
0 of 0 found this helpful
Mazda Tribute Dash Kit
RickL from Plano TX on 5/26/2011
2003 Mazda Tribute
The kit does not mount firmly to the radio or the dash. Within two days the radio was falling out of the mount. I had to fashion supports to hold up the radio as well as a stop to prevent the radio from sliding into the dash. The radio mounts and the dash surround are made from fairly soft plastic that is way too flexible especially in the Texas heat.
Pros:
Cons:
0 of 0 found this helpful
Totally unnecessary for my installation.
Scott B from Austin, TX on 5/23/2011
This is mostly oriented to using a single DIN device (or two) to replace a double DIN device in the dash. This is the exact oposite of what I was doing, and so ordering this part was a mistake. If you are installing one single, hight device, or two single height devices, this adapter will probably work fine. (When installing a single device, the second opening becomes a nice location for storing CDs or other small items. If you are installing a double DIN device, like I did, don't order this part.
Pros:
Cons:
3 of 4 found this helpful
Excellent!
Paul G from San Jose, CA on 3/7/2011
2000 Mazda Miata
The single DIN setup with a shelf that comes with the Mazda Miata set is excellent. Great design, good instructions, easy to install. I was about to build a unit just like this, but this one is better.
Pros:
Cons:
0 of 0 found this helpful
Excelent
Jay from Dallesport. Wa. on 1/28/2011
Fits like a factory item and added a pocket. My wife loves it.
Pros:
Cons:
0 of 1 found this helpful
Mazda Protege5 DD Install
Mike from Buffalo, NY on 11/7/2010
2003 Mazda Protege5
I used the double din trim kit in a 2003 Mazda Protege5 with the Pioneer AVH-3200BT. The trim piece fits perfectly with both the car and the head unit. It fits well and does what it's supposed to. The plastic look of the trim isn't the most appealing but that will vary depending on what style head unit you are installing. Overall, two thumbs up.
Pros:
Cons:
2 of 2 found this helpful
Better than the Metra but still flawed
SamM from Richmond, VA on 9/10/2010
2003 Mazda Protege5
I had the Metra version of this with my last head unit, and I feel the Scoche wins on being a bit more substantial and having a removable back plate to the bottom pocket that makes running rear-connected auxiliary and USB cables a bit easier to handle cleanly by drilling holes in the back plate. As should be expected, it snapped in very cleanly and the head unit fits snugly into it. Installation was very easy after I realized that super-gluing a couple of shims to the kit provided perfect stability for the head unit. The big issue with this is that the trim ring is precariously connected to the body by four minuscule tabs and it's prone to snap right out when driving over train tracks or minor potholes. This is second time super glue came in handy when installing the kit. Granted, the Metra has the same problem, but I'd like to see one of the companies employ a better solution. The minor issue, like nearly all aftermarket dash houses, is that it's ugly. Then again, since it was free I can't really complain.
Pros:
Cons:
1 of 1 found this helpful
Metra 99-7505 Dash Kit
Dan from Tampa, FL on 3/22/2010
2000 Mazda Miata
Was a snap to install. Fits very well. I like it.
Pros:
Cons:
0 of 0 found this helpful
Assembly was a "snap"
Crutchfield customer from Broken Arrow, OK on 10/18/2009
2002 Mazda Miata
This panel kit fit perfectly, both the receiver that I bought and the hole in the dash. It is made to accept either a single receiver unit or a dual setup with a receiver and another accessory. Once you get the receiver unit's cage installed in this panel, it just snaps into your dash with a perfect fit.
Pros:
Cons:
1 of 1 found this helpful
Works great, no complaints!
Spencer from Syracuse, NY on 4/13/2009
2000 Mazda Miata
Tight fit, good quality plastic with textured finish. No issues. Wasn't sure if I'd end up using this part, but it came in handy.
Pros:
Cons:
0 of 0 found this helpful
Great for Beginner
Greg from Redding, CA. on 2/12/2009
2001 Mazda Miata
Mr. Mechanic I am not! Although my father was a great mechanic (his career) I inherited none of his skill. Nevertheless, the Mazda Kit was a snap to install. The only problem was getting the radio out, the double din extractor, did not work; not the kit's problem, Mazda put the clips in like iron. I finally, using extractor and screwdrivers, got it to release. After that it was easy. Probably the clips holding the radio into the cage could be stronger. However, I screwed up and bent them putting radio in. I bent them back, but radio not as secure as I would like. However, so far not a movement (and a Miata moves!). So, I am pleased. I had a large hole to fill, and install the bluetooth microphone, and the finished product looks professional! I can't tell you how well you did on this one, because most things I "fix" I break!
Pros:
Cons:
1 of 1 found this helpful
wasn't needed for my miata at all
blakelock from VA on 1/26/2009
1999 Mazda Miata
hi all, these adapters are cheap and flimsy. mine actually broke during shipment so i tried to install my Pioneer DEH-2000MP head into my '99 miata without the adapter. the stereo fit perfectly with no modification or adapter at all.
Pros:
Cons:
5 of 5 found this helpful
Kit is useless for double din radio in mazda
kalish from Albertson, ny on 1/11/2009
2003 Mazda Tribute
The kit is absolutely useless for a double din installation. The first issue is that the side mounts are not attached to the face plate, but merely slot it place. The second issue is that there is no back or bottom support for the radio. So, when you put it in place, the radio simply falls into the dash leaving the frame in place. Took much customization to build a support bracket for the radio. Should be removed as a supported Crutchfield item.
Pros:
Cons:
9 of 9 found this helpful
Terrible!!!!
John from San Antonio on 12/29/2008
2003 Mazda Protege
The only good thing about this product is that it was free with my stereo. I usually dont write bad reviews about products but this thing is soooooooooooooooooooooooo frustrating i had to. The stereo pops out of the bracket with the slightest bump, and its extremly difficult to put it back in place, and lastly why does it have the plastic bar going across the middle that you have to cut away, cause when you do cut it, it leaves very noticable imperfections where you made the cuts!!!!!!! all in all, im pretty comfortable saying you'd be better off if you just use some duct tape to scure the radio.... okay im kidding about the tape thing but for real though DO NOT BUY THIS PRODUCT, especially if you have a 2003 mazda protege and a pioneer fh-p8000bt
Pros:
Cons:
5 of 5 found this helpful
Good kit
mach1 from Bonaire GA on 11/23/2008
2003 Mazda Protege
I was sceptical about buying this kit, considering all the negative comments about "structural integrity" , but was very pleased with the product. It is solid and the integrity comes down to the installer. A simple strap support bolted to the radio, and to the center storage cavity, and then to the cars dashboard support structure makes for a very simple, strong and clean install.
Pros:
Cons:
0 of 0 found this helpful
Not Up To Expectations
Mike V. from Northeast on 11/6/2008
Got this with the Clarion DUZ385SAT I was installing in my '02 Miata LS. While the appearance portion compliments both the OEM dash and HU, I'm very displeased with the lack of structural integrity of the kit. A two-year-old could rip this thing out in a heartbeat! Why didn't they try to at least incorporate the OEM security clips?
Pros:
Cons:
0 of 0 found this helpful
Terrible for a Mazda Tribute
Lee from Raleigh, NC on 9/23/2008
Absolutely terrible dash kit if you want to install a double din radio or monitor. There is nothing at all to mount it to inside the dash of an 04 Mazda Tribute! Might no be so bad with the single din w/ pocket option, but I just needed the double din frame and mount. Thought since it was vehicle specific it would actually mount inside the dash....
Pros:
Cons:
3 of 3 found this helpful
I hate this kit
Sharon from Gretna, LA on 6/28/2008
2002 Mazda Protege
I have a Mazda 2002 Protege. First of all, I couldn't use the part with the bin, no way to keep it in place. I ended up using the other part, but it came with no screws to attach the radio, so I had to get my own screws. Once that went into place, now I have a open space in the dash that I have to figure out how to hide, since the radio I bought (Kenwood) only fits the top half.
Pros:
Cons:
0 of 0 found this helpful
Worst ever
lacklustre484 from Findlay, OH on 6/20/2008
I installed a double din stereo and every time I take off it pops out. Every time I hit a bump the kit frame pops off. Unfortunately with the car and stereo I have installed this is the only option. Several installers warned me not to buy a Metra brand product for installation, but I just couldn't find anything else. If you can avoid this product, please do so.
Pros:
Cons:
3 of 3 found this helpful
dash kit
Rich from savannah,GA on 2/12/2008
helps with a "clean" appearance but came with a few pieces that i did not need.
Pros:
Cons:
0 of 0 found this helpful
Works well
Spungus X from Bayonne, NJ on 12/2/2007
2004 Mazda Miata
This product made installing my single din radio quick and painless in the place of my factory double din unit. My only complaint is the storage bin under the radio is of little use. The bin has no lip and it does not angle down towards the back of the bin. Because of this, items placed in the bin slide out when the car is accelerating.
Pros:
Cons:
0 of 0 found this helpful
Metra 99-7505 Dash Kit
Carlos from Moreno Valley, CA on 3/24/2007
2002 Mazda Protege
Pretty good product. Had no difficulties installing kit & radio. Did not have problems like other customers had with the other installation kit. No rattles or vibrations heard from kit so far. Delivery from Crutchfield was pretty quick, I was impressed.
Pros:
Cons:
7 of 7 found this helpful
