Metra ABS316
car sound from West Lafayette, IN on 7/14/2024
I got this to prep for the speaker I bought to replace the factory original in my 2024 CR-V Hybrid Sport Touring center dash. It turned out that the speaker fit perfectly without any modifications. Now I have no use for this SBS board.
Pros:
Cons:
0 of 0 found this helpful
An Installers Secret Sauce!
Albert from Heidelberg, MS on 1/9/2024
Just the right stiffness to make custom panels or templates out! Great quality too!
Pros: Easy to cut, Molderble, and great texture
Cons: You have to have a plastic cut blade to get clean cuts or Router
0 of 0 found this helpful
Metra ABS316
Robert from Starke, FL on 8/23/2023
0 of 0 found this helpful
Motorcycle stereo cover from Metra ABS316
Jim from Billerica, MA on 7/6/2023
I needed something to go around the stereo I put in my motorcycle and had a gap all around it. It was suggested that I get the 12"x12" ABS316 to use. I measured what I needed, placed masking tape on both sides of the plastic, traced out what I needed and cut with a jigsaw, using a very fine blade. Worked perfect and am very happy with the results. Thank you Crutchfield.
Pros: Excellent solutions and product. With great price.
Cons:
0 of 0 found this helpful
Replaced Polk 6x9
Roger from Salem, OR on 6/14/2023
Really impressed with ... Tweeters movement a plus. Also this was an open box.. NO ISSUES . All packed and all the parts were perfect.
Pros:
Cons:
0 of 0 found this helpful
Misleading advertising
Tim from Okeechobee, FL on 4/2/2023
The product picture shows 3 sheets but when you get it, it is only 1 sheet
Pros: Perfect and strong for my repairs and easy to cut with my hand cut off grinder. It melted perfectly to my other abs material and I did not need abs rods to fill in the gaps.
Cons: Misleading advertising page showing 3 sheets and you only get 1.
1 of 2 found this helpful
Bought for amp tack
Vladimir from Valley Stream, NY on 3/27/2023
1 of 1 found this helpful
Metra ABS316
Thomas from Newport, MI on 9/22/2022
Perfect for mounting plates, I used to create a bass knob bracket and it worked great.
Pros:
Cons:
1 of 1 found this helpful
Metra ABS316
Robert from Center Conway, NH on 8/15/2022
Worked perfectly as a mounting surface for replacement 6" speakers. A dremel tool circle attachment worked well to create the "donut " rings.
Pros:
Cons:
1 of 2 found this helpful
Worked great
Gregory from Mckenzie, AL on 6/24/2022
Used for a custom install of midranges in my doors. Worked great but took a few tries to figure out the best method to cut this stuff.
Pros: Great for making speaker brackets
Cons: Took a few tries to get my cuts right.
0 of 2 found this helpful
Metra ABS316
Joseph Charl from Frederick, MD on 1/30/2022
Metra provided outstanding support in my order. Many thanks, J.C.
Pros:
Cons:
0 of 0 found this helpful
Works ok.
Crutchfield customer from Eau Claire, WI on 7/29/2021
Overall good. Not easy to work with it with woodworking equipment (table saw, miter box, router). Don't care for the pebble finish, but this is subjective. Five stars to Crutchfield. They are awesome!
Pros:
Cons:
0 of 0 found this helpful
The Best in the business
Crutchfield customer from Conyers, GA on 3/4/2021
0 of 1 found this helpful
