Wire harness improv

The tech staff saved my installation of the Alpine Amplifier by sending out the Honda wire harness. I retained the existing head unit and this allowed me to complete the tight install in my 2005 Honda Accord Thanks for the great support.

Have questions for
?

Saved me a entire afternoon!

For the money, this saved me at least three to four hours of wiring. This snapped right in had the perfect length. They even wired it up for my new HVAC control and trim skit with steering controls. Don't be a hero, but this wiring harness.

Have questions for
?

Honda Bluetooth Wiring Harness

A simple solution that made installing the product I bought with it very easy!

Have questions for
?

Honda Bluetooth Wiring Harness

solid replacement for the factory plug.... plenty of extra wire length to make installation easier

Have questions for
?

Honda Bluetooth Wiring Harness

Works great, however I had to shave it to fit my radio. Otherwise perfect and works well.

Have questions for
?

Perfect fit

Perfect fit into my Old system

Have questions for
?

Must have for an easy install!

Ordered this harness to install a Parrot CK3100 Black Edition to my 2004 Honda Odyssey EX-RES. It made the install extremely easy! The hardest part was fitting the Parrot modules into the empty spaces...Would definitely recommend to anyone installing a bluetooth.

Have questions for
?

Bluetooth Wiring Harness

This harness was great, all I had to do was match the connectors and plug them in and connect to the original radio. Saved me lot of time and frustration to install Bluetooth in my 2006 Odyssey.

Have questions for
?

Works as described

Sure there isn't a whole lotta room behind the radio after installing this harness, but after some finagling it eventually fits. Completely plug-and-play

Have questions for
?

Honda Bluetooth harness

I would not have been able to install my Bluetooth car kit without it!

Have questions for
?

Honda Bluetooth® Wiring Harness Used with Parrot Mki 9200

Great product; truly plug and play. Used it to install the Parrot 9200. Only issue is finding the proper space behind your dash to put all the wires so the pocket door can go back easily.

Have questions for
?

Honda Bluetooth® Wiring Harness (BT1721A)

Perfect fit. Made installation of Parrot CK3100 easy. It would have been a nightmare without this harness.

Have questions for
?

Honda Bluetooth Wiring Harness

This makes the Honda isntallation for the Parrot MKi9200 a snap and idiot proof. The connectors only work one way - ie fit one way and match up in a snap. Lots of wires that are intimidating, but this just makes it a snap. Lots of room in my Odyssey to fit the rats nest of wiring behind the stereo.

Have questions for
?

Don't try without this

I wouldn't try to add anything to a sound system without a wiring harness. This made installation a breeze.

Have questions for
?

Honda Bluetooth Wiring Harness

Installed harness in a 2004 Honda CRV with a alpine CDE-102 head unit.Using a Parrot CK3000 evo unit as the bluetooth adapter. The whole setup works excellent! could not be happier with the results. Did not have to cut a single wire.

Have questions for
?

Honda Bluetooth Wiring Harness

love the harness kits everyone i have ever rec from Crutchfield has been perfect and a massive time saver

Have questions for
?

Honda Bluetooth Wiring Harness

Works perfectly as advertised. The mastersheets that it came with were very helpful in taking apart my 2006 Honda Accord's (EX-V6 w/o Nav) dashboard. Only complaint is that it has so many extra wires and the harness plugs were so big that it was a real challenge cramming everything back into place behind the center console. I used it with a Parrot MKi9000.

Have questions for
?

Couldn't have done it without this

I used this with a Parrot MKi9100 in a 2006 Honda Odyssey. I can't imagine trying to install the Parrot without this! This was perfectly plug-n-play - well worth the money.

Have questions for
?

Must have for plug and play!

This wiring harness for Bluetooth hands free phone installs is a must have if you're interested in the simplest do-it-yourself install. It's literally error-proof as the adapter plugs, both male and female, are unique and can only fit one way. The only caution I'll pass on is that I could not get all the wires and plugs to fit in the space below the radio while still being able to install the dash bin below the radio. Others may have better luck but I had to remove the radio and stash all the wires and plugs above the radio. The main problem for me was that the car's plug that fits into the radio, which gets plugged into this harness, doesn't have much slack at all. There was really no where to move the car plug where it wouldn't interfere with the bin door opening. Fortunately, removing the radio wasn't too much hassle. Definitely buy this harness if you're interested in a simple plug and play install. This makes it EASY!!!

Have questions for
?

Instructions for installation of CK3200

I just installed a CK3200 in a 1998 Accord with a factory stereo. No installation instructions came with either product, other than a speaker wiring diagram. You WILL need this adapter. The only connections you need to make are to plug this adapter in between the factory stereo and the CK3200. The phone adapter comes with a myriad of other wires, but those don't need to be plugged in, I just wire tied those into a bundle and tucked them away. Physical installation is by far the biggest challenge with the CK3200 if you buy this harness. I'm a fairly experienced amateur installer, and I would never try to install this without the adapter, given the absence of documentation.

Have questions for
?

Honda Bluetooth Wiring Harness

High quality product. Really made installation easier. I would not have wanted to install my Parrot without it. The only issue is that there were no directions with the harness. It's pretty logical as to how it all goes together but having directions or a diagram would have made installation just that much easier.

Have questions for
?

Seamless Install - True Plug & Play

I would highly recommend this product to anyone who is planning to install the parrot CK3100, especially if they are trying to install it themselves. This harness is a must (made the install straightforward with no splicing of wires. It took me about 3 hours to install and test. It connected instantly with my BB Pearl. I was able to transfer my phone book directly from my BB with the push of a button. Took about a min to transfer around 250 entries. Will try to connect my wife's Motorola RZR tomorrow. I got the instructions to opening the fascia and factory installed stereo online. You need to search for instructions to install the cassette player & DVD player.

Have questions for
?

Honda Bluetooth Wiring Harness

This harness made it incredibly easy to hook up my Parrot. I was worried that it might not work with an aftermarket stereo, but because my stereo was installed with the Crutchfield wiring harness I was able to plug the Parrot harness into the original plug. I just wish I would have known to order this when I ordered the Parrot!

Have questions for
?

Honda Bluetooth Wiring Harness

Well-made and easy-to-install. Turns a complicated hook-up into an easy job!

Have questions for
?

Honda Bluetooth Wiring Harness

This is a high quality wiring harness. The connectors and wires are solid. I recently installed a Parrot CK3100 bluetooth car kit in my 2001 Honda Accord. This wiring harness makes installing the Parrot kit a snap. The wiring harness connects between the car and the factory radio and provides a set of ISO connectors that allow the Parrot to be connected between the radio and the car. The installation requires no cutting or splicing of any wiring. Highly Recommended!

Have questions for
?

A must have

A must have if you're going to install this product yourself. I didn't need to connect any wires beyond the harness (04 Honda Pilot EX). Worked great!

Have questions for
?