About the JL Audio 10WXv2
Built for hard-hitting, long-lasting performance
Built for hard-hitting, long-lasting performance
JL Audio builds their hard-hitting WX Series subs for the long haul. Patented cooling and construction technologies allow these subs to pump out accurate, lifelike bass, while standing up to the inevitable abuse that every sub will see. Plus, JL Audio designs the sub's inner works to deliver a one-two punch of extended cone excursion and precise response.
Ideal when space is tight
The 10WXv2 works great in both sealed and ported enclosures, utilizing a polypropylene cone with a foam surround for powerful, reliable bass reproduction. The rear gasket provides improved sealing in your enclosure, while the heavy-duty 4-ohm voice coil resists breakdown under extreme conditions. The customizable trim ring lets you add a personalized look to your setup.
Product highlights:
- 10" 4-ohm subwoofer
- polypropylene cone with foam surround
- power range: 50-200 watts RMS
- frequency response: 25-250 Hz
- sensitivity: 86.06 dB
- top-mount depth: 4-13/16"
- sealed box volume: 0.625 cubic feet
- warranty: 1 year
- MFR # 92175
What's in the box:
JL Audio 10WXv2 owner's manual
- One 10" Single voice coil 4-ohm subwoofer
- Owner's manual
Customer reviews for JL Audio 10WXv2
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsCustomer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the JL Audio 10WXv2
Features & specs
Features and Specs | ||
---|---|---|
Size | 10 -inch | |
Impedance (Ohms) | --- | |
Cone Material | Polypropylene | |
Surround Material | Foam | |
Port diameter (inches) | 3 | |
Port length (inches) | 13.5 | |
Free-Air | No | |
Dual Voice Coil | No | |
Sensitivity |
86.06 dB at 1 watt | |
Frequency Response | 25 - 250 Hz | |
Max RMS Power Handling | 200 | |
Peak Power Handling (Watts) | 400 | |
Top Mount Depth (inches) | 4 13/16 | |
Bottom Mount Depth (inches) | N/A | |
Cutout Diameter or Length (inches) | 8 13/16 | |
Frame Width | 10.537 | |
Frame Length | 10.537 | |
Vas (liters) | 47.01 | |
Fs (Hz) | 29.38 | |
Qts | 0.45 | |
Xmax (millimeters) | 9.5 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Box Requirements | ||
Ideal Sealed Box Volume (cubic feet) | 0.625 | |
Minimum Sealed Box Volume (cubic feet) | N/A | |
Maximum Sealed Box Volume (cubic feet) | N/A | |
Ideal Ported Box Volume (cubic feet) | 1 | |
Minimum Ported Box Volume (cubic feet) | N/A | |
Maximum Ported Box Volume (cubic feet) | N/A |
Product Research
Features
Enclosure Compatibility
Features
Dynamic Motor Analysis (DMA): DMA is a JL Audio proprietary method of improving dynamic motor behavior. As a result of DMA optimization, the woofer's motor remains linear in motor force over a long excursion range, and maintains a stable fixed magnetic field in the gap over a wide power range. The result is reduced distortion, faithfully reproduced transients, and tight, clean, articulate bass.
Elevated Frame Cooling: The elevated frame design of the 10WXv2 delivers cool air through slots directly above the top-plate to the voice coil. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.
Rear Gasket: The woofer has an integrated foam rear gasket which provides an optimal seal when installing into the enclosure.
Enclosure Compatibility
Sealed Box Volume: JL Audio recommends a 0.625 cubic foot sealed box. A diagram is provided in the owner's manual for a sealed box with external dimensions of 17-1/4" W x 11" H x 9" D, assuming 3/4" thick material. (If using 5/8" thick materials, you should subtract 1/4" from each dimension.)
Ported Box Volume: JL Audio recommends a 1.0 cubic foot ported box. A diagram is provided in the owner's manual for a ported box with external dimensions of 22" W x 12" H x 10-1/2" D, assuming 3/4" thick material. (If using 5/8" thick materials, you should subtract 1/4" from each dimension.) A single 3" diameter x 13-1/2" long port is recommended, resulting in a tuning frequency of 35 Hz.
The JL Audio 10WXv2 replaces these items
JL Audio 10WX-4
- polypropylene cone with foam surround
- 50-200 watts RMS power range
- top-mount depth: 4-7/8"
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...
Put one of these in my 79 GMC pick up powered by a 120w rms Clarion 2way amp bridged with a Kenwood deck and 4 Clarion 6X9s. Sounds like a concert in my cab with any type of music I play.
thumperluv from Tucson, AZ