About the AudioControl AC-LGD 60
Bypass your factory radio's shut down circuit
Bypass your factory radio's shut down circuit
Some factory radios will not work without sensing that speakers (low-impedance loads) are connected to their outputs, so successfully installing an aftermarket sound processor or amplifier becomes a challenge. AudioControl's AC-LGD 60 Load Generating Devices solve this issue by generating an acceptable impedance load and stabilizing the signal for the amplified factory system in a 2015-up Chrysler-built vehicle.
The AC-LGD 60s plug directly into any AudioControl line output converter (LOC), signal processor, or amplifier with speaker-level inputs. You can also use AC-LGD 60s with almost any non-AudioControl device by unscrewing the connectors and connecting the wires directly.
Product highlights:
- load generating devices (pair)
- works in select 2015-up Chrysler-built vehicles
- plugs into AudioControl processors and amps
- compatible with most devices with speaker-level inputs
- maximum power handling: 150 watts or 25 volts per channel
- dimensions: 2-5/16"W (9-3/4" with connectors) x 1/16"H x 1"D
- warranty: 5 years
- MFR # AC-LGD 60
What's in the box:
AudioControl AC-LGD 60 owner's manual
- 2 Load generating devices w/ attached 6.5" harnesses
Customer reviews for AudioControl AC-LGD 60
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsCustomer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the AudioControl AC-LGD 60
Product Research
Features
Overview: The AudioControl AC-LGD60 Load Generating Device let you add an aftermarket amplifier or signal processor to a Dodge, Chrysler, Jeep, and Maserati factory amplified sound system. Many modern factory amplifiers feature built-in protection circuits that will mute the audio outputs of the factory radio if the factory speakers are removed. The AC-LGD60 has been designed to generate a load (60Ω) to stabilize the signal from the factory amplified system and provide the best possible audio.
Connection: The AC-LGD60 includes 2 load generating devices, each with connectors and 6.5" of attached speaker wire that's color coded to match most aftermarket speaker wire colors. If adding an AudioControl amplifier or processor, the included connectors simply plug into the sockets on the AudioControl device. If adding another brand of amp, set-screws on the connectors allow the wire to be easily removed and attached to the new amp. The Load Generators get placed in between the output of the factory amp and the input of the new amplifier or processor. Each channel can accept a maximum input voltage of 25Vrms (150W) and provides 60Ω of impedance.
- Note: The AC-LGD60 is designed for factory AMPLIFIED systems. If installing in a vehicle that's NON-AMPLIFIED, the AudioControl AC-LGD20 will be required.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Works perfect for my setup and solve the load of the factory amplifier to get the correct signal to my dsp
Dennis from East Haven, CT