About the Kicker 43CVR154

Built to handle abuse
Built to handle abuse
Kicker's CompVR Series 43CVR154 sub delivers serious bass without tearing a hole in your wallet. This 15" sub handles up to 500 watts RMS, thanks to a tough, injection-moulded polypropylene cone supported by a reliable Santoprene™ surround. The unique SoloKon™ cone with its 360-degree back bracing keeps going strong when the bass gets heavy, while perimeter venting in the strong steel basket keeps the voice coils cool for dependable performance.
Dual voice coils for wiring flexibility
The sub's dual 4-ohm voice coils give you more wiring options when setting up your system. The sub's cool-looking black finish highlights the potent low end you'll hear and feel.
Note: If you are wiring this DVC sub for lower impedance, make sure that your amp is compatible.
Product highlights:
- 15" subwoofer with dual 4-ohm voice coils
- injection-molded polypropylene cone
- ribbed Santoprene rubber surround
- power handling: 500 watts RMS (250 watts per coil)
- 1,000 watts peak power handling
- frequency response: 25-500 Hz
- sensitivity: 89.2 dB
- top-mount depth: 8-3/16"
- sealed box volume: 1.8-5.2 cu. ft.
- ported box volume: 3.0-5.0 cu. ft.
- grille not included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 43CVR154
What's in the box:
Kicker 43CVR154 owner's manual
- One 15" Dual 4-ohm voice coil subwoofer
- Kicker logo sticker
- Manual (English/ Spanish/ German/ French)
- Template on box
Reviews
Customer reviews
Loading reviews...
Kicker 43CVR154 reviews
Average review:
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kicker 43CVR154

Features & specs
Size | 15 -inch | |
Impedance (Ohms) | 2, 8 | |
Cone Material | Polypropylene | |
Surround Material | Rubber | |
Ideal Sealed Box Volume (cubic feet) | N/A | |
Ideal Ported Box Volume (cubic feet) | N/A | |
Port diameter (inches) | N/A | |
Port length (inches) | N/A | |
Free-Air | No | |
Dual Voice Coil | Yes | |
Sensitivity |
89.2 dB at 1 watt | |
Frequency Response | 25 - 500 Hz | |
Max RMS Power Handling | 500 | |
Peak Power Handling (Watts) | 1000 | |
Top Mount Depth (inches) | 8 3/16 | |
Bottom Mount Depth (inches) | N/A | |
Cutout Diameter or Length (inches) | 13 11/16 | |
Vas (liters) | 143.82 | |
Fs (Hz) | 24.6 | |
Qts | 0.381 | |
Xmax (millimeters) | 15 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year |
Product Research
Features
Dual Voice Coils: This woofer features dual 4Ω voice coils, offering wiring flexibility. When the voice coils are wired in parallel, the woofer presents a 2Ω load. When the voice coils are wired in series, the woofer presents an 8Ω load.
Break-in Period: The high-performance suspension system makes the speaker very stiff out-of-the-box. Approximately 2 weeks of daily playing will allow the suspension to break-in and reach its optimum equilibrium. A broken-in subwoofer will exhibit stronger bass performance, smoother response, and greater low-bass extension.
Sealed Enclosure Applications: Kicker recommends sealed enclosure volumes from 1.8 ft³ to 5.2 ft³. Sealed enclosures provide the most control over a woofer, will handle a lot of power, and provide accurate sonic reproduction, making them suitable for all types of music.
Ported Enclosure Applications: Kicker recommends ported enclosure volumes from 3 ft³ to 5 ft³. Slot port dimensions are given in the manual for the minimum enclosure volume (15-1/2" x 2-3/4" x 25-3/4") and the maximum enclosure volume (15-1/2" x 3" x 22"). Ported (or vented) enclosures typically provide better overall efficiency than sealed, so they are suitable for use with smaller amplifiers, giving you more bass output from less power. However, this efficiency comes at the expense of very low frequency output.
Loading accessories...
Customer Q&A
1 question already asked
Loading articles...