Chat
Contact us
Close contact box
Connect ID #
952 597 29
Connect ID #
952 597 29

Sorry, chat is currently unavailable

Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Kicker 44DCWC102 Ported enclosure with dual 10" CompC subwoofers

Item # 206DCWC102

If you're thinking of big bass, odds are you're thinking about Kicker.

If you're thinking of big bass, odds are you're thinking about Kicker.

Item # 206DCWC102

Shop all Kicker Sub Boxes (Loaded)

About the Kicker 44DCWC102

Bob Bihlmayer

A perfect pair

If you're thinking of big bass, odds are you're thinking about Kicker. Their 44DCWC102 loaded enclosure features a pair of 10" CompC subs that will really add some low-end muscle in your music. The rugged ported box was designed as a perfect match for the subs, so you can count on getting maximum performance, no matter what kind of music you prefer.

A perfect pair

If you're thinking of big bass, odds are you're thinking about Kicker. Their 44DCWC102 loaded enclosure features a pair of 10" CompC subs that will really add some low-end muscle in your music. The rugged ported box was designed as a perfect match for the subs, so you can count on getting maximum performance, no matter what kind of music you prefer.

Two hard-hitting CompC subs

Each 10" CompC sub features a flex-resistant polypropylene cone for hard-hitting lows without distortion, with a ribbed foam surround that promotes long excursion and helps to keep the cones on target. A heavy-duty steel basket provides a reliable foundation for big bass, and extensive venting ensures long-lasting performance that won't break down when the bass gets heavy.

Heavy-duty enclosure

Sturdy medium-density fiberboard ensures long-lasting performance from the enclosure, and the special-design side port enhances bass production without getting sloppy. The enclosure's 2-ohm impedance draws maximum power from your mono amplifier.

READ LESS

Product highlights:

  • ported enclosure with two 10" CompC subwoofers
  • medium-density fiberboard construction covered with carpet
  • 2-ohm total impedance
  • power handling: 600 watts RMS (1200 watts peak power)
  • frequency response: 30-500 Hz
  • sensitivity: 98.4 dB
  • 28"W x 14"H x 16-3/8"D1 x 13-7/16"D2
  • warranty: 1 year
  • MFR # 44DCWC102

What's in the box:

  • Vented enclosure loaded with two 10" CompC subwoofers
  • 4 Mounting brackets
  • Four 1" Pan head screws
  • Eight 5/8" Flat head screws
  • Owner's manual (English/ Spanish/ German/ French)

Customer reviews for Kicker 44DCWC102

Loading reviews...

Average review:

5.0 out of 5 stars
40 reviews

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Kicker 44DCWC102

Pat M.

Features & specs

General
Woofer Size (inches) 10
Speakers Per Box 2
Woofer Material Polypropylene
Enclosure Type Ported
Color Black
Pieces in System 1
Width (inches) 28-1/8
Height (inches) 14
Depth (inches) 16-3/8
Connector Type Spring post
Frequency Response 30-500 Hz
Power Range (Watts RMS) 600
Maximum Wattage 1200
Sensitivity 98.4 dB
Impedance 2 ohms
Parts Warranty 1 Year
Labor Warranty 1 Year

Product Research

Features

Wire Terminal: The two 4Ω subwoofers are internally wired in parallel to present a 2Ω load at the single pair of spring post wire terminals. The terminals are mounted on the back of the enclosure and will accept pin connectors, single banana plugs, or bare wire up to 10 gauge.

Port: The slot port is on the front of the enclosure, between the subwoofers.

Loading accessories...

Customer Q&A

13 questions already asked

Q
What is the length and width of the box?
lucas  May 30, 2023
1 answer
A
I would be happy to help, Lucas. The listed dimensions from Kicker are below to help: 28" Wide 14" High 16-3/8" Depth 1(bottom of box) 13-7/16" Depth 2(top of box) Please reach out anytime you need us!
bo  May 31, 2023 (Staff)
Q
Would a 600 watt amp be sufficient for this speaker?
tbell  Apr 12, 2023
1 answer
A
An amplifier capable of offering 600 watts RMS at 2-ohms would be perfect for these subs.
zachary  Apr 12, 2023 (Staff)
Q
What is the tuning frequency of the box?
jose  May 28, 2022
1 answer
A
I reached out to Kicker directly. the tuning frequency for this enclosure is 35 Hz!
thomas  Jun 01, 2022 (Staff)
Q
Is my CXA400.1 amp going to work in my 2011 Ford Edge?
christina  Jan 01, 2022
1 answer
A
Not if you don???t have a back seat. It???s too big to fit under a pickup seat.
ben  Jan 01, 2022
Q
How much does the box weigh with out the speakers?
tracey  Sep 30, 2021
1 answer
A
They come preloaded so I don't have any specs on an empty box. As it stands the shipped weight is 65 pounds. You may be able to contact Kicker for further information.
kenneth  Sep 30, 2021 (Staff)
Q
What gauge are the speaker wires inside the box?
jay  May 28, 2021
2 answers
A
We do not know the gauge of the wire inside the box, but we do know that Kicker makes sure the wire they do use inside the box fully supports the RMS watts that each subwoofer is expected to get which is 300 watts RMS.
jason  Jun 12, 2021 (Staff)
A
I bought this box straight from crutchfield i dont no what guage wire they used as it all together with speakers installed
omar  Jun 10, 2021
Q
If the subs max out at 250rms each when wired in parallel, how is this box rated at 600rms?
paul  Apr 14, 2021
1 answer
A
We have not received any answers from other customers on your question. I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your question.
thomas  Apr 28, 2021 (Staff)
Q
If the subs max out at 250rms each when wired in parallel, how is this box rated at 600rms?
paul  Apr 14, 2021
1 answer
A
I can???t answer that. All I can tell you is I have this box under the bed in my sleeper of my semi truck and it will vibrate the seat going down the road if you want it to. I???m happy with mine but you may be wanting to blow the windows out of your car idk. I can???t remember how I even wired mine up but it does good I think.
ben  Apr 14, 2021
Q
KICKER - CX 400W Class D Digital Mono Amplifier with Variable Low-Pass Crossover - i have this amp for now will it work or do I got go bigger ?
manuel  Jan 16, 2021
2 answers
A
You should get a bigger amp. They recommend 600 Watts for that sub box. I have those subs paired with a Infinity Reference 6001A and it works great.
matt  Jan 17, 2021
A
I???m running a 300.1 kicker amp and it does great so yes your amp will be fine
aaron  Jan 17, 2021
Q
I have a Kicker zx- 700.5 powering my whole system I have these Sub set up in 2-ohm which makes my amp give feed 420 Watt RMS to them and they sound great. You don't have to feed them 600 Watt RMS but it's best to try and not use a under powered amp?
joshua  Jan 07, 2018
1 answer
A
Ideally you'd want to power the Kicker 44DCWC102 with an amplifier rated somewhere between 400-800 watts RMS x 1 (at 2-ohm) to get the best output. For more details or to discuss further, please contact an Advisor directly by phone (888.955.6000) or online chat. Thanks!
david  Jan 16, 2018 (Staff)
Q
JBL GTX500 Mono subwoofer amplifier ??? 500 watts RMS x 1 at 2 ohms Would this be a good amp to pair with this set?
tyler  Dec 01, 2017
1 answer
A
The JBL will not realize the full potential of this enclosure (up to 600 watts RMS) but will power it very well, sure. I hope that helps. My bio: https://www.crutchfield.com/bio/Ryan
ryan  Dec 05, 2017 (Staff)
Q
What amp could you use for this sub?
brandon  Oct 23, 2017
1 answer
A
Thanks for your question. For information on selecting the best amp for your sub I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system.
kristina  Oct 30, 2017 (Staff)
Q
I have the P500X1BD 500 RMS amp. If I bridged the amp to these subs to put approximately 1000 watts to the 1200 peak watts it advertises, will it be a good pairing?
david  Oct 14, 2017
1 answer
A
First off, you cannot bridge a mono amplifier. That particular amp that you mentioned is wired as parallel internally, so even if you see two pairs of outputs, it really is just one channel. Second, putting out 1000 watts to this particular sub is not a good thing. While 1200 watts peak is a specification, that means it'll handle 1200 watts in a really short burst, not continuously. The amp you have will put out 150 watts at 4 ohms, 300 at 2 ohms and 500 at 1 ohm. This sub is 2 ohms and will handle 600 watts RMS(continuously). If you pair your amp to this sub, you will give it only 300 watts. Crutchfield recommends being within 75% to 150% of the RMS rating so you will need an amp that can deliver that much wattage at 2 ohm, should you decide to buy this sub. If you rather keep your amp and get a different sub, find one that will closely match the output of your amp at the varying ohms resistance.
mark david  Oct 15, 2017
SHOW MORESHOW LESS

Loading articles...

Compare the sound