About the Kicker 42IQI
Kicker's high IQ system
Kicker's high IQ system
Building a competition system? Kicker's IQI Bluetooth® network hub allows you to control up to four connected Kicker IQ amplifiers from one device using the TWEEQ™ tuning app. TWEEQ identifies each IQ amp in the network, and gives you access to the controls of every channel of every amplifier. The ICI also lets you stream music from your compatible device, as well as make hands-free calls. A microphone is included.
Kicker Q-Class products incorporate cutting-edge technologies and superb construction to deliver an extraordinary musical experience in your vehicle. These products are only sold by select dealers chosen by Kicker.
Product highlights:
- control up to four IQ amps via TWEEQ app
- Bluetooth® streaming
- supports hands-free calling — microphone included
- dimensions: 3-3/16"W x 1"H x 2-13/16"D
- warranty: 3 years
- MFR # 42IQI
What's in the box:
- IQI amplifier interface
- Microphone with attached 16.9' cable (3.5mm plug)
- Dual-sided 3M adhesive
- Four 48" amplifier DIN cables (8-pin connectors on each end)
- 2 Self-tapping screws (length 3/4")
- Quick Start Guide
Customer reviews for Kicker 42IQI
Loading...
Loading reviews...
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kicker 42IQI
Product Research
Features
Overview: The Kicker IQI Bluetooth Interface is an add-on accessory for any IQ-series amplifier. IQI lets you wirelessly stream music directly to your amplifier, and control your amplifiers through the TWEEQ app. You can also control your amp using voice commands, using the included microphone. Up to 4 Kicker IQ-series amplifiers can be connected to the IQI. Dimensions: 3-1/8"W x 15/16"H x 2-13/16"D.
Bluetooth Streaming: With Bluetooth 2.1 EDR on board, you can stream music from your smartphone or tablet directly to your amplifier. Pressing the Pair button on the IQI makes the interface discoverable by your mobile device. Up to 4 devices can be connected at once. Once your device is paired, you can play music through your favorite app or streaming service. Bluetooth range is up to 116 feet, line of sight with no obstructions. The range is reduced to 23 feet with one body obstruction, and 14 feet with two bodies. Supported Bluetooth profiles include: H2DP, AVRCP, HFP, IAP, and SPP.
TWEEQ: Kicker's TWEEQ tuning software gives you a wide range of audio tools and adjustments for your IQ-series amplifiers. Using the IQI, you can configure your amplifiers through the TWEEQ application wirelessly on your mobile device. The app is compatible with iOS (8.0 or later) and Android (4.0.3 and up) devices. TWEEQ DSP software is also available for download to a PC (Windows 7, 8, or 10), connected via USB (Mini-USB cable required). The TWEEQ Software offers the following adjustments (iOS version example):
- Home Page:
- Amplifier Connected: (name)
- Amplifier Temperature: (displayed)
- Gain: 0-32dB (1dB increments)
- Bass Boost: 0-18dB (1dB increments)
- EQ Page:
- Adjustment: -12dB to +12dB
- Center Frequencies: 20, 25, 31.5, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, 800, 1k, 1.25k, 1.6k, 2k, 2.5k, 3.15k, 4k, 5k, 6.3k, 8k, 10k, 12.5k, 16k, 20k
- Crossover (Basic):
- Channel Select: Ch 1, Ch 2, Ch 3, Ch 4, Ch 5 (dependent upon number of channels)
- High Pass:
- Type: Butterworth, Linkwitz-Riley
- Slope (dB/octave): Off, 6, 12, 18, 24
- Frequency: (enter numeric value)
- Low Pass:
- Type: Butterworth, Linkwitz-Riley
- Slope (dB/octave): Off, 6, 12, 18, 24
- Frequency: (enter numeric value)
- Advanced:
- Level: 0-32dB (0.5dB increments)
- Time Delay:
- Master Delay (Channel Select): Ch 1, Ch 2, Ch 3, Ch 4, Ch 5 (dependent upon number of channels of connected amp)
- Increment (ms): 1.0, 0.1, 0.02
- Delay Times (ms): 0-20
Power Requirements: The IQI requires no additional power connections. It draws power from the amplifier connected at AMP 1 port. When the amplifier powers on, the "PWR" LED on the IQI will illuminate, indicating it is receiving power.
Connections: The Kicker IQI has the following connections:
- Amplifiers (Amp 1, 2, 3, 4): The IQI has four 8-pin DIN connectors for IQ-series amplifiers. Four 48" DIN cables are included in the box.
- Microphone: A 3.5mm mini-jack is provided for the included voice-control microphone. The microphone has a push-to-talk button to enable voice-control.
- Pairing: The interface has a recessed pairing button. A small pointed device, approximately 1/8" in diameter, is required for activating the Bluetooth pairing sequence.
- FW Load: This USB port is for internal Kicker use only.
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...