About the Morel MXR240.4

Crossovers for your Hybrid Series speakers
If you're custom-building a Morel Hybrid 2-way component system and you're not using an active crossover, you'll need a pair of Morel's MXR240.4 crossovers. These crossovers ensure that the speakers in your system receive the right frequencies for premium performance. You can set two different levels for the tweeter to control the overall tone in your vehicle.
Product highlights:
- pair of passive crossovers networks for Morel Hybrid components
- designed for use with a 2-way system
- crossover point: 2,200 Hz at 12 dB per octave
- tweeter attenuator with level adjustment (-2 dB, 0 dB, or +2 dB)
- warranty: 2 years
- MFR # 327134-325
What's in the box:
- Two MXR240.4 Crossovers
- Six 3/4" Screws
- Installation guide
- Warranty card
Customer reviews for Morel MXR240.4
Loading reviews...
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Morel MXR240.4

Product Research
Features
Overview: The MXR240.4 passive crossover is designed for use with the Morel Hybrid series components. The crossovers are sold as a pair to cover the left and right channels.
Terminals: Each crossover's inputs and outputs are screw terminal strips (0.315" wide); they will accept bare wire or spade connectors.
Tweeter Output Level: A jumper inside each crossover allows you to adjust the tweeter output level; choose -2 dB, 0 dB, or +2 dB.
Crossover Point/Slope: For both high-pass and low-pass, the crossover point is 2.2 kHz. The high-pass slope is 12 dB/octave and the low-pass slope is 18 dB/octave.Dimensions:
- Width: 5.55"
- Height: 1.42"
- Depth: 4.17"
Loading accessories...
Customer Q&A
Loading articles...