Features

Camera System: The Thinkware F800PRODH two-camera system features an F800PRO dash camera, designed to mount to any windshield and record a wide 140˚ viewing angle of the road ahead, along with a BCFH-200 rear-view camera.

• F800PRO: The dash cam features a 2.13 Megapixel CMOS sensor, for full HD 1080p recordings, and a wide dynamic range that can provide the right exposure and contrast in any type of environment. The dash cam is also designed to work in low light conditions with minimal picture noise.
• BCFH-200: rear-view camera is an interior-mounted camera that can monitor incidents inside your vehicle or can be used to record a constant rear-facing view of the road. The BCFH-200 connects to the F800PRO via the provided USB Micro-B cable, allowing the dash cam to record both views while driving and when parked, for added security.

Recording Modes: The F800PRO supports 4 recording modes for different situational needs:

• Continuous Recording: This mode is automatically activated when the engine is started. Recorded video is saved in a series of one minute clips, with the oldest footage getting overwritten when the included memory card is full.
• Incident Recording: The camera is constantly recording while driving and if the built-in gyro detects an impact, the F800PRO will start saving footage from both cameras 10 seconds before the collision is detected and 10 seconds afterwards.
• Motion Detection Recording: The F800PRO monitors the supply voltage to determine if the engine is running. If not, the unit can automatically switch to Parking Mode, enabling Motion Detection Recording. In this mode, if the camera detects motion or an impact, it will save footage 10 seconds prior to and 10 seconds after the impact. The F800PRO can also detect motion in front of either camera and can start recording if a person approaches or is lurking around your vehicle. Along with Motion Detection, the camera includes other handy options while in Parking Mode:
  • Time Lapse: If the vehicle will be parked for long periods of time, power can be conserved by putting the camera into Time Lapse mode. This records video at a rate of 2 frames per second (fps) for 10 minutes, which then gets compressed into a 2 minute long file for storage. If an impact is detected during this time, video is recorded for 100 seconds at a rate of 2 fps, 50 seconds before and 50 seconds after an impact.
  • Energy Saving: In this mode the camera monitors impacts to the vehicle, but only records when an impact is detected. At this point, a video is recorded for 20 seconds from within 1 second after detection.
• Manual Recording: Recording can be done by manually pressing the REC button on the back of the camera. This will record from 10 seconds before to 50 seconds after pressing the button.

Super Night Vision: This mode allows both the dash and rear cameras to record bright, high resolution videos while parked at night.

Storage and Filing: All recorded video is stored on the included 32GB MicroSD card. Additional MicroSD cards can be used, up to 128GB. Each of the different types of recording files are stored in folders named for that type of recording, making it easier to review and archive footage. The 4 different storage files include: Continuous Recordings, Continuous Recording Incidents, Manual Recordings, Motion Detection, and Parking Incidents.

Thinkware Cloud: Control and configuration of the dash camera can be managed on your smartphone using the Thinkware Cloud app, available for download from the Apple App and Google Play stores (Android: 4.4, KitKat or higher/ iOS: 8.0 or higher). The smartphone gets connected to the F800PRO via a WiFi connection, allowing you to view recorded files and change menu settings. The Thinkware Cloud app lets you check your vehicle's location and status and will send notifications directly to your compatible iOS or Android smartphone.

Other Thinkware Cloud features include:

• Vehicle Location: This feature can help drivers, parents, or fleet managers to find a vehicle's location. The F800PRO features a built-in GPS antenna allowing it to display the vehicle's location, speed, and direction of travel, using Google Maps display. GPS information is updated every 10 seconds.
• Geofencing: This feature allows you to pre-select a geographic zone, that if the vehicle enters or exits, will send a push notification through the Thinkware Cloud. The desired zone radius can be set from approximately 110 feet (100m) up to approximately 373 miles (600km). Up to 20 geofences can be set.
• Driving Impact: In the event of a crash, this feature can help the driver notify other of an emergency situation when the driver is not in a condition to do so. If the vehicle is impacted with a g-force level greater than 3g or 4g while driving, the dash cam will automatically send a push notification alert to all parties logged into the Thinkware Cloud app on their smartphones. A 20 second video of the incident (10 seconds before and 10 seconds after) is saved on the Thinkware Cloud server and a push notification alert of the video is sent out that can be viewed and downloaded from the app.

PC Viewer: Recorded videos can also be viewed and managed from your home computer by downloading the latest PC viewer software found here. System requirements include:

• PC: Windows 7 or higher (64-bit recommended)
• MAC: OS X 10.8 Mountain Lion or higher
• Other: DirectX 9.0 or higher, Explorer v. 7.0 or higher

Advanced Driver Assistance System: The F800PRO includes several additional safety features for use while driving:

• Lane Departure Warning System: The dash cam can detect when the vehicle is veering out of its current lane via real-time images.
• Forward Collision Warning System: Can warn the driver of impending road hazards or stopped traffic.
• Safety Camera Alert: Alerts the driver of upcoming speed and red light cameras.

Hardwire Installation: The F800PRH includes a 118" power and ground cable for powering the camera system from the vehicle's fuse box or from a 12 volt power source. The BCFH-200 rear-view camera is powered through its Micro-B USB connection to the dash camera.

Specifications (Both Cameras):

• Camera Type: 2.13 MP Sony Exmor STARVIS
• Camera Resolution: 1080p HD
• Frame Rate: 30 fps.
• Viewing Angle: 140˚ Diagonal
• Operating Temperature: 14˚F - 140˚F
• Storage Capacity: MicroSD card up to 128GB (32GB included)
• Input Power: 12/24VDC
• Dimensions (F800PRO): Width - 4.23", Height - 1.23", Depth - 2.40"
• Dimensions (BCFH-200): Width - 2.375", Height - 1.250", Depth - 1.0"