About the Hertz DT 24.3
Big highs from a compact tweeter
Big highs from a compact tweeter
Add new dimension and detail to your music with Hertz's Dieci Series DT 24.3 tweeters. These 1" PEI domes, driven by high-energy neodymium magnets, deliver a smooth yet detailed sound with the assistance of included external crossovers. Hertz also gives you helpful hardware for surface- and flush-mounting, so you have the flexibility you need to install these tweeters closer to your ears.
The Hertz philosophy
Hertz believes that a good speaker should bring out the emotional power of the music you love. That's a high bar, but with their commitment to using premium components and boundary-pushing design, they're more than up to challenge. Comprised of music lovers, Hertz is committed to optimizing your car's sound system for total audio enjoyment.
Product highlights:
- 1" PEI dome tweeters
- neodymium magnets
- hardware for flush- and surface-mounting
- handles up to 40 watts RMS (80 watts RMS peak power)
- frequency range: 3,000-23,000 Hz
- external high-pass crossovers (3,500 Hz at 6 dB per octave)
- sensitivity: 94 dB
- top-mount depth: 7/16"
- warranty: 2 years
- MFR # DT 24.3
What's in the box:
- Two DT 24.3 Tweeters (with attached 6" length of speaker wire)
- Two DX 100.3 Crossovers
- 2 Flush mount trim rings
- 2 Flush mount clamps
- 2 Angled surface mount housings
- 2 Grilles (installed)
- 2 Rectangular adhesive foam pads
- 2 Round adhesive foam pads
- Owner's manual (English/ Spanish/ French/ German/ Italian/ Portuguese/ 20 Others)
Customer reviews for Hertz DT 24.3
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsCustomer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Hertz DT 24.3
Features & specs
| General | ||
|---|---|---|
| Speaker Size | 24mm | |
| Design | 1-way | |
| Tweeter Design | Dome | |
| Impedance (Ohms) | 4 | |
| Tweeter Composition | PEI | |
| Woofer Composition | --- | |
| Woofer Surround | --- | |
| Parts Warranty | 2 Years | |
| Labor Warranty | 2 Years | |
| Specifications | ||
| Sensitivity (1W at 1 meter) | 94 | |
| Sensitivity at 2.83 volts | N/A | |
| Frequency Response | 3000 - 23k Hz | |
| Minimum RMS Wattage | --- | |
| Maximum RMS Wattage | 40 | |
| Peak Power Handling (Watts) | 80 | |
| Top-mount Depth (Inches) | 0 7/16 | |
| Bottom-mount Depth (Inches) | N/A | |
| Cutout Diameter or Length (inches) | 1 7/16 | |
| Mounting Height (Inches) | 0.366 | |
Product Research
Features
Mounting: Brackets are included for flush mounting and angled surface mounting (60° or 30°) the tweeters.
Mounting Dimensions:
| Flush Mount | 60° Angled Surface Mount | 30° Angled Surface Mount | |
|---|---|---|---|
| Mounting Height | 0.366" | 1.232" | 1.515" |
| Depth | 0.426" | N/A | N/A |
| Frame Diameter | 1.605" | N/A | N/A |
| Cutout Diameter | 1.420" | N/A | N/A |
| Frame Width | N/A | 1.463" | 1.463" |
| Frame Depth | N/A | 1.535" | 1.255" |
Crossovers: The crossovers have input and output wires attached (25" input, 12" output). The crossover point is 3.5 kHz and the high pass slope is 6 dB/octave.
Crossover Dimensions:
- Width: 1.75" (2" including the wire)
- Height: 0.80"
- Depth: 1"
Loading...
Loading accessories...
Customer Q&A
7 questions already asked
Loading...
Loading articles...
Put these tweeters in my 2023 mazda3 . It fit right in the factory location I just had to do a little modification to the factory tweeter brackets but they sound so much better than the muddy factory tweeters.
Salam from Temple Hills, MD