About the Alpine HCE-C125

Be a parking lot superhero

Be a parking lot superhero
Why on earth would you need a rear-view camera when you have eyes and a neck that turns? Well, be honest, how many times have you backed up with something blocking your vision, and you were just... winging it? It's been more than a few times, hasn't it?
Alpine's HCE-C125 rear-view cam lets you back up with confidence, instead of pushing your luck. Measuring about one cubic inch, this ice-cube sized camera pairs stealthily with Alpine's low-key KTX-C10LP license plate mounting kit to give you a 131º horizontal viewing angle on the world behind you. Thanks to its automatic imaging function, this camera intuitively adjusts white balance, showing you a crisp, bright mirror image, day or night. With a view this expansive and clear, you'll dare to parallel park in spaces most people would avoid. In some cities, that's a super power.
This camera is compatible with any in-dash receiver or front-mount screen with a composite video input.
Note: A rear-view camera provides an additional view when reversing your vehicle. It is intended to be used in conjuction with your rear- and side-view mirrors to give a fuller picture of what's behind you. It is not intended as a replacement for your mirrors.
Highlights:
- NTSC rear-view camera with standard RCA and direct connectivity
- automatic imaging function — metering and white balance adjustment
- mirror image view
- high low-light performance
- fits Alpine KTX-C10LP license plate camera mounting kit
- camera dimensions: 0.935"W x 0.935"H x 1.175"D
- black-box dimensions: 1.5"W x 0.59"H x 0.98"D
- warranty: 1 year
- MFR # HCE-C125
What's in the box:
Alpine HCE-C125 owner's manual
- Rear-view camera (with attached 20" cable terminated by a 5-pin connector)
- 23' Power/Ground/Signal harness (w/ 5-pin connector on one end and 6-pin connector on other end)
- 9.5' Power/Ground/Signal harness (w/ a 6-pin connector on one end and a male composite video RCA connector on other end along with power/ground signal wire)
- 2-Piece mounting bracket
- 4 Machine screws
- 4 Self-tapping screws
- Rubber sleeve
- Rubber wedge
- 3M tape
- 5 Wire-ties
- Owner's Manual (En/Fr/Sp)
Customer reviews for Alpine HCE-C125
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsCustomer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Alpine HCE-C125

Features & specs
Features and Specs | ||
---|---|---|
Camera Type | Rear | |
Resolution | 307,200 | |
Parking Guidelines | No | |
Lux Rating | 1.5 lux (min) | |
Selectable Views | N | |
Reversed Image | Mirror | |
Horizontal Viewing Angle | 131 deg | |
Vertical Viewing Angle | 103 deg | |
Wireless | No | |
Plug type | Composite video |
Product Research
Features
Rearview Camera: The rearview camera assists you (the driver) in checking behind your vehicle by sending images to your vehicle's in-dash monitor, showing conditions behind the car. The camera uses a wide-angle lens, therefore, there is a difference in distance perspective between what is normally seen and what appears on the screen. Also, the images shown by the camera are reversed, so as to appear the same as what is seen through the rearview mirror. The Alpine rearview camera offers the following additional features.
- Weatherproof housing
- 1/3.7" color CMOS image sensor with a 4:3 aspect ratio
- 640 x 480 (300,000) effective pixels
- 131° horizontal viewing angle, 103° vertical viewing angle
- Illumination Range of 1.5 lx to 100,000 lx
- F=1.34 focal length
- F=1:2.2 brightness
Compatibility: The HCE-C125 rearview camera can be used with Alpine multimedia & navigation receivers which feature a proprietary multi-pin camera input, as well as Alpine & other brands of receivers with a composite video camera input.
- Proprietary Harness: If you are connecting an Alpine receiver with a proprietary camera input, then use the included 23' harness with proprietary multi-pin connectors on each end (you will not use the composite video harness).
- Composite Video Harness: If you are connecting an Alpine or other brand of receiver with a composite video jack, you will use both the 23' proprietary harness and the 9.5' composite video harness.
Optional License Plate Mount Kit: The HCE-C125 rearview camera is compatible with Alpine's KTX-C10LP rearview camera license plate mounting kit (500KTXC10L, sold separately).
Optional Multi-Camera Selector Interface: The optional Alpine KCX-C250MC Multi-Camera Selector Interface (500KCXC250, sold separately) allows as many as three camera systems (Front, Rear, & Side) to be connected to and controlled from select Alpine in-dash navigation receivers.
The Alpine HCE-C125 replaces these items

Alpine HCE-C115
- rear-view camera with composite video converter
- 1.5 lux camera sees well day or night
- 128-degree wide viewing angle

Alpine HCE-C117D
- rear-view camera for select Alpine A/V receivers
- 1.5 lux camera sees well day or night
- 128-degree wide viewing angle
Loading...
Loading accessories...
Customer Q&A
7 questions already asked
Loading...
Loading articles...
Was a little apprehensive about the camera and which one should I pick. Glad I did I can see everything clearly... Had more than enough cable to reach the head unit in the cab, I have a Titan. Worth the money.
JK,Fallbrook from California