Alpine KTX-C10LP
John from Ronkonkoma, NY on 6/4/2025
Definitely worth the extra bucks on this one.
Pros:
Cons:
0 of 0 found this helpful
Fine Another Soliution
Crutchfield customer from CARTERSVILLE, GA on 12/26/2024
Total travesty in design. If you want to get pulled over for hiding the State name or year decal get this tag frame. Connection wires are fine as frog hair, good luck splicing. I'm so worn out returning crap these days I am just going to make it work with a screwdriver and a file. If not I'll just use the cam housing portion and trash the rest. The only positive is the lights do not illuminate directly at the camera lens causing the exposure compensation to dim. In the image attached is from me I slotting the top tag holes to show some portion of the state, but it hides the year sticker on the bottom right. The factory tag lights flooded the camera at night making it dim. However the light bars under the bumper took care of all that!
Pros: Lights do not interfere with cam exposure at night.
Cons: Just about everything. A design engineer who never tried installing it.
1 of 1 found this helpful
Alpine KTX-C10LP
Mike from Tappahanock, VA on 11/3/2024
0 of 0 found this helpful
Alpine KTX-C10LP
John from Deerfield Beach, FL on 5/4/2024
Frame is heavy weight aluminum and good quality works great on 2001 Dodge Ram 2500 the tailgate can be lowerd and not hit the camera Alpine makes good stuff
Pros:
Cons:
0 of 0 found this helpful
Works
Josh from Puyallup, WA on 4/15/2024
Works as advertised
Pros: Looks good
Cons: Mounting screw poor design
0 of 0 found this helpful
Worst Design Ever
Scott from MUNSTER, IN on 8/31/2023
This has got to be the most poorly engineered product in Alpine's history. The screws are the size of a grain of sand and the hardware requires way too many steps to assemble. This deserves a Negative 5 Star Rating! Never Again
Pros:
Cons:
0 of 5 found this helpful
well made but a bit pricey
Scot from Lexington, KY on 7/9/2023
2008 Toyota FJ Cruiser
I purchased this to make installing the Alpine backup camera easier and to improve the looks of the final installation. The product succeeds on both counts. Construction features a sturdy metal frame, convenient mounting, and lighting. My installation location only provides mounting holes at the top of the license plate. Despite having only two screws, as opposed to four, mounting this frame it mounts securely.
Pros: solidly built; nice protection for camera, includes lights
Cons: a bit expensive for what it is
2 of 2 found this helpful
Alpine KTX-C10LP
Ron from Mount Clemens, MI on 4/3/2023
Simple enough to install and does exactly what it is supposed to do.
Pros: Finish on product is nice
Cons: Super tiny screws that are difficult to work with.
1 of 1 found this helpful
Alpine KTX-C10LP
Garth from Beckley, WV on 3/20/2023
0 of 0 found this helpful
good but could be great
Fred from Burlison, TN on 2/24/2023
The screws that mount the camera tilt assembly to the plate are small enough to require a tiny electronics screwdriver. These must be removed to tighten the camera tilt assembly or remove the camera if you ever need to. Be VERY careful not to strip these as it's easy to do!!! I haven't bothered to connect the lights as of yet, but it would be nice if they shined rearward for lighting the area in reverse. Overall, the frame is very solid and the mount works as intended. If Alpine would address these two small issues, it would be perfect.
Pros: Beefy solid frame Hex plate mounting screws included to reduce the chance of someone swiping your tag and frame.
Cons: wimpy camera mount screws the lights need to shine rearward rather than throwing more light on the tag.
5 of 5 found this helpful
But did you die?
Sean from SNEADS FERRY, NC on 1/25/2023
Meh, nice chunk of what I believe is aluminum. Since it is designed to house Alpine's backup camera's, it would be nice if the organic lights aimed outwards instead of down. I already have license plates lights, but more illumination for backing up would be appreciated. Does Dante have a special circle for manufacturers who use cheap screws? I removed my camera once to install an upgrade and the jeweler size screws are already fatigued. Had to drill one out . Replacement stainless steel screws are inbound to replace them. I do believe the frame is formidable enough to protect the backup camera from minor bumper strikes and petty theft. TLDR, It's done, I'm keeping it. If I did it all over again I would try one of the Boyo brand backup cameras that mount to the top of your license plate.
Pros:
Cons:
2 of 2 found this helpful
Alpine KTX-C10LP
Crutchfield customer from MANCHESTER, MD on 1/14/2023
Well built and looks good. For my Jeep installation, took a bit of figuring to route the wires cleanly, but that's not an issue with the frame.
Pros:
Cons:
1 of 1 found this helpful
Alpine KTX-C10LP
Aaron from Lake Stevens, WA on 12/2/2022
0 of 0 found this helpful
Alpine KTX-C10LP
Ed from Port St Lucie, FL on 11/23/2022
I have one on the front and the rear of my car. It works perfectly !
Pros: made to fit
Cons: none
0 of 0 found this helpful
High build quality and finish. Worth the premium.
Andrew from Olympia, WA on 9/26/2022
High build quality and finish. Worth the premium.
Pros: High build quality and finish. Worth the premium.
Cons: None - do it.
0 of 0 found this helpful
Money32
Darrick from Richmond, TX on 9/13/2022
Lights are bright and camera fits perfectly. Great product to get for your Alpine backup camera.
Pros:
Cons:
0 of 0 found this helpful
Alpine KTX-C10LP
Noel from Ponce De Leon, FL on 5/18/2022
0 of 0 found this helpful
Alpine KTX-C10LP
Mariano from Fontana, CA on 3/25/2022
0 of 0 found this helpful
Convenient
Greg from Greenville, NC on 3/16/2022
Mounts with Alpine camera. Only reason I didn't give it 5 stars is because it covers up too much of your license plate.
Pros:
Cons:
1 of 1 found this helpful
Camera plate
Scott from Sun City, AZ on 2/22/2022
So per easy to install and tap directly into existing backup plate lights. Of course you always have outstanding technical support when you need assistance!
Pros: Simple
Cons:
0 of 0 found this helpful
Alpine KTX-C10LP
Charles from Sitka, AK on 1/29/2022
Everything fit nice and worked just as good
Pros:
Cons:
0 of 0 found this helpful
Good quality
Crutchfield customer from Carolina, PR on 1/16/2022
Solid construction. The camera fit very good, although the assembly accessory need work to fit .
Pros:
Cons:
0 of 0 found this helpful
2012 Corvette install
Angelo from HEREFORD, AZ on 10/5/2021
0 of 0 found this helpful
A must Purchase
Crutchfield customer from Wilmington, NC on 5/17/2021
A must purchase - Worked perfectly with the Alpine Camera
Pros:
Cons:
0 of 0 found this helpful
Back up camera plate
Crutchfield customer from Carlisle, PA on 5/13/2021
Shipped quickly with great customer support for installation
Pros:
Cons:
0 of 0 found this helpful
Alpine KTX-C10LP
Crutchfield customer from Louisville, KY on 3/31/2021
2008 Lincoln MKX
0 of 0 found this helpful
Great fit!
Crutchfield customer from Cooperstown, NY on 3/23/2021
Perfect fit on 2004 Chevy Silverado 2500 HD.
Pros: Super easy to install
Cons: None
0 of 0 found this helpful
Solid, Secure Mount
Crutchfield customer from Norwalk, CT on 1/10/2021
Solid construction, easy mounting, very secure feeling.
Pros: Powdercoat finish, solid construction, easy mounting
Cons: A bit challenging to get the wires fed behind the mount so nothing is visible. It was doable just takes some time.
1 of 1 found this helpful
Integration Made Easy
Crutchfield customer from Ocean Gate, NJ on 12/10/2020
I ordered this for a resto-mod project I'm working on. The frame made integrating the back-up came into the car seamless. It is rather plain in appearance but not unattractive. It's also a bit pricey but by the time you fab an equivalent part you'll spend the price and then some.
Pros: Great license plate frame. Hides the back-up cam well. The built in license plate light is a nice touch as well.
Cons: Price point. Aesthetics are a bit boring.
1 of 1 found this helpful
Alpine KTX-C10LP
Crutchfield customer from Wheeling, IL on 12/8/2020
Easy install and it includes two lights for better night vision
Pros: Excellent product
Cons:
0 of 0 found this helpful
Expensive, but looks and works nicely.
Crutchfield customer from Silverdale, WA on 11/19/2020
Great frame to disguise camera. Quite expensive for what is though.
Pros:
Cons:
1 of 1 found this helpful
Nice place cover but not enough room for the plate
Crutchfield customer from Olympia, WA on 10/10/2020
Well made and good looking plate cover. Fits perfectly.
Pros: Fits plate old location, holds camera securely Good looking
Cons: You have to take a small nic out of the plate if the camera is installed The wires are a little tight and don't fit quite as well as one might like
1 of 1 found this helpful
Does the job
Crutchfield customer from Corpus Christi, TX on 9/25/2020
It does what it's supposed to do. Hopefully I don't get pulled over because some cop is feeling jerky and tells me the lights cover half my state's name.
Pros:
Cons:
3 of 3 found this helpful
Alpine KTX-C10LP
Crutchfield customer from Springfield, OH on 7/10/2020
This was perfect for my rear alpine camera!! A must have for your alpine camera!
Pros:
Cons:
0 of 0 found this helpful
Alpine KTX-C10LP
Crutchfield customer from Diamond Bar, CA on 5/18/2020
Solid attachment point for the backup camera, looks sleek.
Pros:
Cons:
0 of 0 found this helpful
Great buy
Crutchfield customer from Springfield, MO on 3/18/2020
Perfect frame for the alpine camera, screws to install on vehicle didnt work for my ford truck. Had to buy diffrent ones.
Pros: Easy to install
Cons: Small screws for mounting bracket were hard to locate in packaging Screws for frame to mount know vehicle didnt work.
0 of 0 found this helpful
Alpine KTX-C10LP
Crutchfield customer from Scarsdale, NY on 3/11/2020
this is solidly built and looks great with the camera installed.
Pros:
Cons:
0 of 0 found this helpful
Alpine KTX-C10LP
Crutchfield customer from Alpine, TX on 2/17/2020
Makes camera mounting easy and provides a nice LED license plate light.
Pros:
Cons:
1 of 1 found this helpful
Covers the State Name
Crutchfield customer from Dallas, PA on 1/18/2020
The frame covers the license plate state name. It may draw a traffic ticket in some areas. Good idea but improperly designed. The perimeter frame should be taller with longer bolt ears to match the license plate. It's a quick way to mount the camera if you aren't concerned with covering parts of the license plate.
Pros: Quick to install
Cons: Design isn't well thought out
6 of 8 found this helpful
Installed on rear of 2001 Dodge Ram 2500
Austin from EDMONDS, WA on 1/13/2020
This mount paired perfectly with the HCE-1100 HDR camera. This is a very high quality all metal kit that comes with everything you need. Very thorough instructions (including Pickup Truck specific instructions). I was unaware that this has lights in it which i thought was neat even though I didn't use them.
Pros: All-metal Install hardware included
Cons: None
2 of 2 found this helpful
Alpine KTX-C10LP
Crutchfield customer from Hampstead, NC on 12/27/2019
Easy install. Fits perfect, and its pretty cool that it lights up with License plate lights.
Pros: Offers extra lights to plate area.
Cons:
0 of 0 found this helpful
A 'MUST' buy if purchasing an Alpine backup camera
Crutchfield customer from Avon, OH on 12/7/2019
I originally installed my recently purchased Alpine HCE-C1100 backup camera without using the KTX-C10LP frame and regretted not buying it at the same time as the camera, as I wished not to spend the additional money, but found myself spending a great deal of time and effort in the installation of the camera. I found the installation of the frame simple, as all I had to do is transfer the camera from its existing location above the license plate to the frame. The frame is very well constructed and made of high quality materials and hardware. Very well worth the price and I really like the LED lights. I did have to call Crutchfield technical support for assistance in determining which factory wires to splice into and they couldn't have been more helpful.
Pros: Quality construction and materials. Easy installation.
Cons: None
3 of 3 found this helpful
Alpine KTX-C10LP
Scott from AVON, NY on 10/29/2019
Works well with alpine backup camera. Good quality
Pros:
Cons:
0 of 0 found this helpful
Plate bracket
Crutchfield customer from Forest Park, GA on 10/15/2019
Best bracket ever I bought, pretty nice I recommend this item
Pros:
Cons:
0 of 0 found this helpful
Alpine KTX-C10LP
Crutchfield customer from New Smyrna, FL on 10/9/2019
This is a must have option for the Alpine HCE-C1100 camera. Perfect fit and easy installation.
Pros:
Cons:
0 of 0 found this helpful
Great rearview camera
Crutchfield customer from Rochester, MI on 9/16/2019
Great rearview camera for cars that did not have one. Easy to attach to the car and securely holds the license plate. Plenty of wire length to make it all the way to the dash. Installed this on a 2011 Crown Victoria, not a short car, and it worked great. The image provided is clear. The only complaints I have is the super-small hardware to attach the camera to the frame, and the lack of a clear wire channel in the frame to run the camera wires out of the frame. You need to have patience and a small, pointy Phillips screwdriver to tighten and adjust the screws. You will also need patience to get the wire routed in a way that does not let it get pinched, kinked, or otherwise crushed by the frame when you mount the frame to your car.
Pros: Great camera image Plenty of wire for connection
Cons: Super small screws to secure the camera to the frame Wire routing in the frame itself is challenging to not kink or pinch the wires.
1 of 1 found this helpful
Alpine KTX-C10LP
Crutchfield customer from Holland, PA on 9/14/2019
0 of 0 found this helpful
Must Have Acc.
Crutchfield customer from Abilene, TX on 6/29/2019
Works as advertised. Would buy again.
Pros: Looks good.
Cons: Overpriced.
0 of 0 found this helpful
Alpine KTX-C10LP
Crutchfield customer from Estero, FL on 5/13/2019
1 of 1 found this helpful
Out of the stone age.
Craig from Camarillo, CA on 4/22/2019
Upgraded my 2005 Chevrolet Silverado 2500HD stereo system and included a Alpine HCE-C1100 backup camera. The frame easily accepted the camera I purchased and the frame was easy to install.
Pros: Seemless integration with other Alpine product.
Cons: I am a little concerned of theft, but at least the screw heads are hex to add a bit of difficulty to a potential thief.
1 of 1 found this helpful
Alpine KTX-C10LP
Crutchfield customer from Middle River, MD on 4/20/2019
Nice mounting option, wires way too short making it more difficult than it should be.
Pros: Simple install because your not looking for a place to mount the camera.
Cons: Wires should be longer so you can actually reach what you need to tap into for ground and positive without having to splice an additional wire.
1 of 1 found this helpful
Alpine KTX-C10LP
Crutchfield customer from Sparks Glencoe, MD on 3/24/2019
0 of 1 found this helpful
Alpine KTX-C10LP
Crutchfield customer from Kennewick, WA on 2/3/2019
0 of 1 found this helpful
Alpine KTX-C10LP
Crutchfield customer from Bowersville, GA on 1/12/2019
0 of 1 found this helpful
Professional looking
Scott from Clearwater, FL on 12/23/2018
Solid and easy way to mount the camera.
Pros: Solid and stable camera mount. Easy install
Cons: A little pricey, but then again it's good quality and worth it
1 of 1 found this helpful
Back-up
WBA from Alexandria, VA on 10/1/2018
Worked perfectly for adding a back-up camera to my Mercedes SLK without it looking like an add-on. Camera image is high quality.
Pros: Good video quality, looks nice installed
Cons: partially blocks license plate, may be difficult to route wiring in some applications.
2 of 2 found this helpful
Alpine KTX-C10LP
Crutchfield customer from Waikoloa, HI on 5/23/2018
0 of 1 found this helpful
Nice and appealing styling
John from Longview, TX on 4/16/2018
Design covers too much of license plate. Modified plate to bring more of the State name into view, but still is partially obscured. Nice look and lights work great. Once camera installed it's nigh impossible to adjust camera when it vibrates loose from bad roads. Used silicone to hold it in place.
Pros: Easy install
Cons: Design covers too much of state name on plate requiring modification to plate to get more plate visibility. Still partially obscured. But better.
2 of 4 found this helpful
mounts camera securely
Kirk from Salisbury, NC on 3/14/2018
Gave a solid mount to my Alpine backup camera. Looks good on my truck.
Pros: gives a protected secure mount for the camera
Cons: none
2 of 2 found this helpful
Alpine KTX-C10LP
Crutchfield customer from Brooklyn, NY on 3/6/2018
This product is by far the best one I've seen on the market. It provides a very unique OEM look for any vehicle. I would highly recommend. Quality product and great pricing. Most value for your dollar
Pros:
Cons:
0 of 0 found this helpful
Camera Accesssory
CAPT John from Madison, AL on 2/9/2018
This is an accessory that compliments the Alpine stereo and the camera generally well. Had to alter the rear bumper to make the installation by removing the tag anti-vibration bumpers.
Pros:
Cons: Not a universal fit
0 of 0 found this helpful
Looks great!
Gary from Marion, IN on 1/30/2018
0 of 0 found this helpful
Alpine KTX-C10LP
Richard from West Bridgewater, MA on 11/11/2017
Great product. Looks sharp and frames the picture well. Hardly even know it is a license plate frame. Great combo with the Alpine Camera.
Pros:
Cons:
0 of 0 found this helpful
Great mount
Ian from Chandler, AZ on 8/3/2017
I wasn't sure about this at first, but I bought the Alpine HCE 125C, and the new Alpine ilx 107. I wired it all up in an afternoon and I love all three. Mounting options are limited on my truck, and I didn't want to drill into anything so this license plate frame was perfect. I didn't want to spend the extra money, but it's sturdy, provides a great mounting base for my camera, and it was easy to deal with. Good purchase
Pros: sturdy, all the needed supplies are included.
Cons: A little thick on the top portion of the frame.
0 of 0 found this helpful
Clean Looking Instal
Excellent compliment to the Alpine camera! makes for a clean professional looking install and it is lighted.
Pros: Looks Good, All Aluminum construction, Lighted
Cons: A little tight fit for the camera/lighting wires
0 of 0 found this helpful
Alpine KTX-C10LP
Crutchfield customer from Renton, WA on 9/26/2016
Works great. Sturdy. Camera fits into the plate perfectly. Easy to install
Pros:
Cons:
0 of 0 found this helpful
Decent but overpriced
john from englewood, CO on 3/23/2016
OK, so it holds a brand specific camera. It's still a license plate frame. Decent construction but it should include some theft resistant screws.
Pros: Fairly solid, hold an alpine back up camera
Cons: Wires are a tight almost pinchy fit in the back, price.
3 of 3 found this helpful
A Good Mount for Hooking Up Trailers
Steven M from Big Lake,, AK on 3/9/2016
I wanted a camera mount like this for use with hooking up trailers, and it works well for that. You have to provide an exit for the camera cable through the channel of the frame, depending upon where you want it to exit, so be aware that you'll need tools for that if you're planning to install it yourself.
Pros:
Cons:
0 of 0 found this helpful
Good fit/looks nice
Kevin S from Louisiana on 12/18/2015
Good fit. Looks nice. Good construction.
Pros: Camera fits securely.
Cons: You'll need a jeweler's screwdriver to mount your camera with the tiny screws. Fortunately, I had some.
0 of 0 found this helpful
Solid
69vetteguy from South Carolina on 11/24/2015
Nice solid construction. Paired with the Alpine HCE-C157D camera; perfect match. Love the built in LED lighting.
Pros: Metal construction, secure camera mounting.
Cons: Wire for the LED light was odd; single conductor shielded cable? Not such a god idea to use the shield as a conductor.
0 of 0 found this helpful
Alpine KTX-C10LP
Marc from Boston, Ma on 8/19/2015
Perfect for my pickup truck. fast shipping. real heavy frame as well. very easy to put it on. very happy how it turned out.
Pros:
Cons:
1 of 1 found this helpful
KTX-C10LP
JK,Fallbrook from California on 12/26/2014
Made installation easy... Didn't think it was worth the money but I have never been so wrong.
Pros: Heavy metal frame, didn't have to make anything.
Cons: None
2 of 2 found this helpful
Great spot for camera on truck
Ed from New Jersey on 12/16/2014
This puts the camera in a perfect spot to see my trailer hitch when hooking up the boat or jetski. Was always a pain to get in and out of truck to see where I was doing it by myself
Pros:
Cons:
1 of 1 found this helpful
alpine ktx-c10lp
jrj from robbinsville,nc on 8/18/2014
great product. quality made and great construction from alpine. definite purchase if considering.
Pros: great buy .quality construction.sturdy
Cons: n/a
1 of 1 found this helpful
What a view!
Rich from Floresville, Tx on 7/24/2014
The view is awesome. My Mustang is lowered and from this view your just few inches from the ground, but you get a wide view.
Pros: Great product mounts easily and great view.
Cons: Can be stolen if they know what they are looking for.
2 of 2 found this helpful
Perfect fit
Love the way to attach this and great viewing angle from above the license
Pros: Easy to mount
Cons: Had to mangle my license plate to get the wire to route correctly from the camera.
1 of 1 found this helpful
Solid frame, tricky to install
Sam from Decatur, IL on 3/20/2014
Solid metal frame, bright LED lights and several mounting options for cameras. Installation was tricky. Screws are very tiny, and I could not get any of the mounting holes to align with the supplied mounting brackets that attach the camera to the frame. Luckily I was able to modify the mounting brackets to complete installation of an Alpine HCE-C155 camera. Tip- Rather than drill new holes, I modified 2 out of the 4 holes to make them 'C' shaped. This allowed enough room to align all 4 screws and mount the camera.
Pros: LED lights, solid metal frame
Cons: Tricky to install
2 of 2 found this helpful
Alpine KTX-C10LP
AlexG from Fort Worth,TX on 2/9/2014
Great product looks nice works great the lights on my truck were to bright the lights on the mount work great for the camera best thing about the camera bolts right up to it.
Pros:
Cons: None
1 of 1 found this helpful
Great product
Crutchfield customer from Honolulu hi on 1/13/2014
The lighting is nice. My reverse camera fit perfectly. The frame is metal and super durable.
Pros:
Cons:
1 of 1 found this helpful
Alpine KTX-C10LP
Jeff from Wheeling wva on 12/28/2013
0 of 0 found this helpful
Excellent mount
Douglas from Murray, UT on 7/27/2013
Very high quality mounting frame. I loved the fact that I did not need to modify my truck in any way to mount the camera.
Pros: Very high quality mounting frame.
Cons: I needed to trim my license plate to get it to fit behind the frame and allow the cable to go through without subject to damage. It's a cheap, government issues piece of junk (the license plate), so I was happy to cut it up.
1 of 1 found this helpful
Great Product
damonl from Park City, UT on 5/24/2013
This Alpine License Plate Holder and Camera mount are a nice fit and easy to install. Just be careful not to lose the screws they are tiny. I saw the other reviews before purchasing so I opened the packaging up carefully and was mindful while installing the camera about these tiny screws and it was good advice to follow. The plate holder is high quality and looks nice. The camera sits in there perfectly, the only thing was I did need to make a V notch in my license plate to allow the wire coming off the back of the camera to not get pinched. The notch is hidden by the plate holder so its no big deal. The result is a professional look and a sturdy mount for my Alpine 117 camera.
Pros:
Cons:
1 of 1 found this helpful
Excellent Quality
Mike from Maine on 5/6/2013
The quality of this item exceeded expectations. Yes, it is a little pricey, but very worth it. This isn't a cheap plastic piece, it's a nicely finished metal piece with high quality fasteners.
Pros:
Cons:
0 of 0 found this helpful
Great buy
R.L. from Webster MA on 3/20/2013
This item is great, I actually have it installed on all 3 of my cars. I see people complain about the price but you need to realize this isn't some plastic piece of crap. It's all metal and has lights for the plate, which look real cool at night.
Pros: Metal, LED plate light
Cons: needs to come in more than just black
0 of 0 found this helpful
diy
jamie from calhoun ga on 12/10/2012
tools needed: tiny 4 way, itty bitty flat head, file, drill, and courage to hack up fifty dollar part for no good reason. maybe HCE-C104 camera wasn't supposed to fit this tag, if so, why didn't someone tell me? The only way to get camera clocked correctly was to disassemble brackets and rotate inside bezel. More trouble than you'd think.
Pros: LED tag lights
Cons: camera bracket and tag had to be finessed together with a small hammer
1 of 5 found this helpful
Works great
smokytrail from Poquoson, VA on 11/23/2012
Works great with the camera.
Pros: LED lights are a nice touch
Cons: Make sure you have the proper tools (Dremmel, Drill, etc.) to modify the frame to run the wires. Also, the mounting screws are about the same size as sunglass hardware--you'll need a TINY phillips head screw driver for the included hardware. Finally, don't drop the screws--you'll never find them! Now my camera is attached with 3 screws instead of 4.
1 of 1 found this helpful
ktx c10lp alpune rear camera license plate mount
potsiewebber from collegeville pa on 8/12/2012
Good unit. No probs. Works well. Wish it was less expensive. Best price and fastest shipping at crutchfield.
Pros:
Cons:
0 of 2 found this helpful
Good accessory with 2 areas for improvement
JC from Pennsylvania on 8/2/2010
This product is metal and it is sturdy. It holds the camera quite well and the fit and finish is nothing short of excellent. 2 small gripes are that Alpine could have pre-cut a channel in the top rear for wire routing. IMHO, this would not have detracted from the visual quality even if the wires are routed another way. I had to use a dremel and paint the bare metal. I was able to get a decent match, and you really can't tell, but this could have been done for all that have to run wires behind and out the top. Secondly, the included screws will rust - mine are all ready rusting less than a month after install. I was very careful when screwing in, but these will just rust. For this price, We could have had better screws included ie. power coated stainless... Those are small gripes - this is an excellent product.
Pros:
Cons:
27 of 27 found this helpful
