Cambridge Audio Minx 400M

Very high quality build and easy to install. I mounted CA MinxMin 22 s 16 ft up on a wall. The only issue is the terminal posts interfere with the downward travel so I can't aim them exactly where I want them.

Have questions for
?

Almost perfect for the Minx speakers

Very good mounts for the small speakers but should project out a little more to allow more flexibility

Have questions for
?

Cambridge Audio Minx 400M

Very limited rotation.

Have questions for
?

Cambridge Audio Minx 400M

Nice mounts for the Minx speakers. They are very discreet and almost aren't seen behind the speakers. The mounts slide onto the wall mount in one direction, so pay attention to the orientation, particularly around window frames that might dictate which direction the speaker slides onto the mount. Note that mounts don't come with screws for securing the mount to a wall.

Have questions for
?

Cambridge Audio Minx 400M

Like the flexibility it gave to consider different locations for the speakers. 4 wall mounting holes gave plenty of support to secure the minx Min 22 speakers with just drywall anchors.

Have questions for
?

Does the job

Can be a bit fiddly to get mounted right, but works

Have questions for
?

Best speaker brackets!

Super easy to install. Let's me angle speakers to maximize listening pleasure. Great recommendation.

Have questions for
?

Cambridge Audio Minx 400M

Very nice mounts! Hassle free... Very clean look.

Have questions for
?

6+1=7

I have 6 of these in my wall now and i am adding a 7th. Very nice and easy to install

Have questions for
?

Ceiling Mount

I knew these may not work for me. But for the reasonable price. It was worth a try. These would be perfect if they would swing a little further . Then they could be used on either the wall or the ceiling. But they have a limited range of motion. I modified them for my application.

Have questions for
?

Cambridge Audio Minx 400M

I recommend these with the Cambridge Audio Minx Min 12!

Have questions for
?

Cambridge Audio Minx 400M

great sound from small speakers

Have questions for
?

Great for Atmos speakers

I bought 4 of these to use for atmos height speakers. They sound great and work perfectly above us on the ceiling. Would recommend these for full hometheater set up not just Atmos

Have questions for
?

Cambridge Audio Minx 400M

These offer flexibility in speaker mounting. I needed some height to get them positioned correctly and fabricated aluminum angle stock to get the desired position.

Have questions for
?

Just okay with some obvious flaws

These only allow the speaker to rotate about 45 degrees. It the standoff from the bracket was extended by about 1/2", they could allow the speakers to rotate closer to 90 degrees. Seems like an very obvious oversight.

Have questions for
?

Work great

These work great on the Minx 12 and 22. Range is slightly limited by the terminals on the back, but the installation is simple and I was able to direct the speakers right where I needed them.

Have questions for
?

Cambridge Audio Minx 400M

Bought these for my son for Christmas along with the Minx surround speakers. So simple to install and speakers attach effortlessly.

Have questions for
?

Cambridge Audio Minx 400M

These brackets work well but are a bit difficult to install because there is not much room between the speaker and the bracket.

Have questions for
?

Cambridge Audio Minx 400M

I love the speakers. They are nice and small, good looking and work great

Have questions for
?

Cambridge Audio Minx 400M

Works as intended. No issues. I turned them sideways so I could tilt them up and down. You need to supply your own screws.

Have questions for
?

No good for ceiling mount.

Did not work for ceiling mount. Found a great sleek looking ball joint style online.

Have questions for
?

Cambridge Audio Minx 400M

Easy to install, perfect fit.

Have questions for
?

Cambridge Audio Minx 400M

I really think they should just come with the speakers. If I had to buy more than two of these, I'd be bummed. Still, they do the job very well, allowing you to point the speaker pretty much where you want it with some creativity.

Have questions for
?

Cambridge Audio Minx 400M

They function as designed, but too expensive for what they do. The speakers should come with these already.

Have questions for
?

Cambridge Audio Minx 400M

It did it's job.

Have questions for
?

Cambridge Audio Minx 400M

Great, small and compact.

Have questions for
?

Average to Decent Mounts

Decent mounts for the Minx speakers. Small enough to hide behind speaker. I am a little skeptical about how the speaker part of the mount slides into the wall part of the mount. I just mounted them so I haven't had much time for a long time review. They do a good job so far. I am using them for front height speakers, they have limited range of angle. If you are mounting them high and need sharp angles you may need to think twice about these. Overall I am happy with my purchase... so far.

Have questions for
?

Great wall mounts

Great wall mount, actually sealing mount because I have them on the sealing of my apartment. They work great I just wish I could angle them a little more but I'm fine with where they are. Especially for the price. Thanks to Crutchfield. Amazing company. Would love to take a tour someday

Have questions for
?

No Debate, Just Right! My ten cents about screws...

These mounts are elegantly engineered to provide pan and tilt rotations in the minimal depth that is reasonable. They disappear behind even the tiny Minx Min speakers. There is some flex in the plastic wall base for getting a good level, even with slightly irregular screw anchor spacing. Come with installation illustrations if confused. These are precise fitting, well engineered speaker mounts that swivel left and right, and up and down, and hold the position for ten bucks each. It is like leaving Cambridge Audio a small cash tip for being willing to make great sounding speakers that are completely different technology than everyone else uses, and making it all look amazing, too. I like to choose my own ten cent wall anchors for the kind of wall and screw needed. No loss there! No way for Cambridge to know what kind your wall needs, and a waste for them to guess. If you are hanging speakers, spend an extra quarter on color matching screws and anchors. If you tried to make them swivel farther to either side, they would have to stick out too far from the wall, just a mechanical reality. Minx Min speakers are very wide dispersing, and not much angle adjustment is required in most settings. Nothing else would work the same way, easy choice! Worth the money in time saved alone, and flat out preferred if you are mounting on angled ceilings or other difficult scenarios. Just the right fit for the need. Would love a paper speaker template. Have screws, thanks!

Have questions for
?

Cambridge Audio Minx 400M

Easy to install and work great!

Have questions for
?

FLEXIBLE HANGING OPTIONS

Ordered these brackets to mount two Cambridge Minx Min 22's on the wall as surround speakers. it came with options to mount the speakers directly on the wall in a fixed position or brackets that allow you to aim the speakers up and down and to the sides. Worked perfectly and obviously the brackets were made to fit the speakers perfectly. Very happy with my purchase as I was able to aim the speakers exactly where I needed to.

Have questions for
?

Poor design

These brackets are good quality, but they are poorly designed! Minimal instruction included. It's almost impossible to place them accurately (i.e. Straight). The part which is placed against the wall has 4 small holes, one in ea. Corner. Unless u can drill 4 perfectly placed holes, the screws will be misaligned and the bracket will be crooked! Drywall anchors/molly bolts are impossible Trial and error required to make sure the part that attaches to the speaker is correctly oriented! The banana plugs r a good idea. Redesign should be considered

Have questions for
?

Cambridge Audio Minx 400M

Product performs as advertised.

Have questions for
?

Perfect match for the speakers

Perfect match for great soeakers

Have questions for
?

Cambridge Audio Minx 400M

Worked perfectly. Not a lot of adjustability, but just enough for me and my needs. Like all products from crutchfield, seems very well built.

Have questions for
?

Poor design but fits the speaker

This mount is made specifically for this speaker. For that reason I took away a star since they should have designed it with greater clearance for adjustability. You really only have 15 to 20 degrees of angle before the mount blocks the speaker. For this reason you should put it in the mount and try and position it before deciding on the final location of the mount. As others mentioned there are no supplied mounting screws. Inexcusable for the high price of the mount and low cost of 8 screws.

Have questions for
?

Cambridge Audio Minx 400M

these are perfect.

Have questions for
?

Cambridge Audio Minx 400M

enables professional looking "self" installation. provides flexible speaker positioning.

Have questions for
?

Minx 11 Wallmounts

I was looking into changing my rear sorround speakers that were in stands to wall mounts to have more space in the room. I found these wall mounts and looked at the reviews from other people. They were easy to install and can move them up and down and sideways. I was going to purchase the speakers that would apply to the wall mounts. However, the only available was black. I was able to find the white speakers thru another supplier.

Have questions for
?

Excellent mounts

Nice wall mounts for the Minx satellites.

Have questions for
?

Works as Advertised, Simple to Install

Simple to install on the wall. Need a drill and wall anchors. Goes up in minutes. Inexpensive.

Have questions for
?

Cambridge minx mounts

Great product. Great support for speaker. Great price point. A++++++

Have questions for
?

No Mounting Screws?!?!?

Mounts are sturdy, and the movement is quite natural. Once they become loose you can just tighten it up with the supplied allen wrench. Too bad they didn't even include mounting screws! Cambridge has high-priced products and can't even provide their customers with 8 measly screws for such pricey mounts. Not sure why there are two square-shaped holes for the wire to go through, when you can't really separate the black and red wires behind the wall...

Have questions for
?

Needs Improvement

Expensive little dudes. They are not particularly flexible. The limited extension from the mounting surface limits the amount of adjustment. In certain configurations, it is very difficult to use the Allen wrench to tighten. A ball and joint connection with a thumb screw compression would work much better.

Have questions for
?

Very good

This wall mount for the minx satellites works perfect. You can get it at just about any angle and the speaker stays. It comes with a supplied hex wrench that you can use to tighten the 2 hex bolts at just about any weird angle too. I have no regrets getting this.

Have questions for
?

High Quality

If you want a high quality wall mount, and are tired of the cheap, easily breakable type that don't hold position, this is the one for you. Works perfectly as you would expect, since it is designed and made for the Minx speakers. Great fit/function, if you want to wall mount your speakers, this is it. Low profile, just enough room to allow easy positioning of the speaker in the direction you need, and allow for speaker cable connection to the terminals.

Have questions for
?

wall bracketts

worked perfectly

Have questions for
?

400M speaker mounts

These mounts are well constructed and swivel side to side and up and down (although with limited range). Surprisingly, no mounting hardware is included. Seems like it would be cheap to include screws which would fit the countersunk holes in the mounts. It's annoying that I had to buy them separately.

Have questions for
?