Features

Overview: The Memphis Car Audio VIVREMV2 wireless bass control is an accessory for select models of the SixFive V2 series of power amplifiers. The VIVREMV2 automatically pairs with the amplifier when it powers up. The remote can be mounted horizontally or vertically with the included mounting clip. The dimensions of the VIVREMV2 are: 1.60"W, 2.53"H, 1.23"D.

Compatibility: The VIVREMV2 is compatible with the mono and 5-channel models of the SixFive V2 series amplifiers. This includes the following models: VIV1300.5V2, VIV2200.1V2, VIV1500.1V2, VIV1100.1V2, VIV750.1V2, VIV3000.1V2, VIV900.5V2, and VIVBELLE (subwoofer channel only for 5-channel models).

Operation: The VIVREMV2 wireless remote has a large 1-1/8" diameter rotary control that lets you adjust the output volume of the paired amplifier. It has a control range (attenuation) of 0dB to -26dB. When the remote is at maximum volume, the amplifier will be at the level set by the Gain Control. As you turn down the volume on the remote, the amplifier's level is attenuated. The rotary knob can be briefly pressed to mute the amplifier, and pressed again to un-mute. The VIVREMV2 uses EEPROM (electronic memory) to save the last volume setting when powering down, and will return to the same volume when powering up. You can clear the volume memory by pressing the button for 5 seconds, resetting the volume to MAX.

LED: The included LED will flash blue as you turn the volume up or down, and glow solid blue when the volume is set to Minimum or Maximum volume. When the amplifier goes into protection, the LED will glow solid red.

Power: The Memphis VIVREMV2 has a built-in rechargeable battery. The battery can be charged in 4 hours via the included USB type-C to type-A cable, and will provide approximately 3000 hours of battery life. You can also hardwire the VIVREMV2 to avoid having to charge the device. A USB type-C hardwire connection is included in the box.