Crutchfield Canada
Free standard shipping
on most orders over $49 Details
Get email updates
Sign up
Expert Advisors
1-800-297-9469



 
  Home > >

  Sanus VMAA26 Black
  Sanus VMAA26 Black Flat-panel Wall Mount w/Tilt/Sw
 
Enter the Crutchfield Research Centre & A/V
Universal 30"-52" LCD/plasma wall mount



Stock Status: Discontinued


Product Code: 051VMAA26B

Description Crutchfield Hands-on Research
 

The Sanus wall mount makes it easy to position your compatible flat-panel display exactly how you want it. Designed for 30" to 52" TVs, this heavy-gauge steel bracket features an articulated arm that lets you extend your set from the wall, swivel it up to 90°, and tilt it vertically for optimal viewing. A "roll" adjustment allows you to level your TV horizontally after installation.

 
Details:
   » designed for flat-panel plasma and LCD TVs up to 52" (VESA 200 mounting standard)
   » heavy-gauge steel construction
   » TV mounting distance from wall: 3-1/4" to 25-3/4"
   » tilt range: +5° to -15° (may vary with size of TV)
   » swivel range: +90° to -90° (may vary with size of TV)
   » roll control: +6° to -6°
   » supports up to 130 lbs.
   » stud-mounting required
   » 29-1/4"W x 18-1/2"H x 3-1/4"D
   » warranty: 1 year

Average Customer Rating: Based on 10 Reviews.


 
September-02-10
Reviewer: kenB from Pleasanton, Ca.  
GREAT is about the best way to describe the Sanas VMAA26 mount. It took my son-in-
law 37 minutes to install the mount and and hang my 70 lb. 54" Panasonic plasma TV.  
I would recommend this unit to anyone who wants a quality product.


 
STURDY and pretty easy to install August-24-09
Reviewer: Schultz from Grand Rapids, MI  
It arrived fast and I had it up a day later with a 46" Samsung LCD TV.  The instructions are pretty good, especially if you've put together knock down/flat pack furniture before.  Believe the other comments -- you'll need two strong people to hang the TV on the mount, and you must find the centers of two wood studs because the whole thing is very heavy.  Once up, it moves easily and smoothly, like it weighs nothing.  I really bought it for the 26" extension feature.  When I'm done watching, I glide it back 2 feet to keep the TV well protected.  Pulling it out 2 feet before firing up the system has impressed a couple of neighbors! Recommended.


 
Great mount, but.... August-13-09
Reviewer: Vincent from NY  
... be prepared to improvise a bit during installation.  Right from step 1, the machine screws included did not work with my new Sony Bravia XBR 40". The short screws were too short & the long ones too long, so off to the hardware store for screws.  While I was there I picked up stainless lags (read the other reviews). Next, the allen wrench included with the hardware was the wrong size - very frustrating. Somewhere around step 6 I discovered the instructions were out of sequence, so I had to backtrack a bit. But once it's installed, the mount is like a tank & works very well.  Hardware & instructions issues aside, I'd give it a 5/5.


 
Highly recommend June-06-09
Reviewer: Robert from Hampton Roads, VA  
If there's a chance you'll change your viewing position, consider this instead of a cheaper tilt only mount.  My 83 year old mom can swivel it with a 52" Samsung LCD TV.  The listing here is for 50" or less sets: Sanus now lists it up to 56".  Install was very straightforward; you will need two adults and I'd plan for two hours.  The instructions are very clear and all parts are included.  Make very sure you've got the wall stud located and you're drilling into the center.  If there's an outlet close the floor near the stud you'll be using, then be a wire is probably stapled to one side of the stud.  Make a couple of extra passes with a stud finder (don't just bang on the wall and listen) to make sure you've got the stud located.  I did replace the screws used to mount the brackets to the set.  Sanus supplies two lengths of screws for every possible diameter for the set screw holes.  For me, one seemed to barely enter the set screws while the other seemed to make contact with something inside the TV at the last turn.  I bought a few screws of in-between  lengths (totaled under $4) but same size diameter and threading (metric) as those that fit my set.  They worked perfectly.  You'll need two adults to: help place the wall brackets, lift the TV onto the mount, and steady the TV while you make the final adjustments.  Both Sanus and Crutchfield have great sales and tech support.


 
Solid - few complaints March-07-09
Reviewer: Dave from Nebraska City, NE  
The product was solid and well built. Assembly was not difficult. A few minor gripes. While the loose parts were conveniently packaged in separate pouches sorted by the step in the assembly instructions, apparently the instructions changed at some point and no longer match the steps marked on the parts. Also, the Crutchfield web site says it is good up to a 52" set (which mine is), but the manufacturer's manual says it is only rated for up to a 50" set. The Crutchfield rep assured me that as long as the weight limits were not exceeded it would be fine. So far so good. I just recommend this discrepancy be reconciled to avoid future confusion.

[Editor's Note: While the manufacturers information only lists TV's up to 50", our research team has identified this will work with TV's up to 52".]


View All Customer Reviews

Browse for more products in the same category as this item:

Video
Home Theatre & Audio
Home Theatre & Audio > Cables & Installation > TV Wall Mounts
Home Theatre & Audio > Cables & Installation
Video > TV Accessories > Cables & Installation
Cables, Stands & Mounts


Sanus VMAA26 Black CAD $349.99
Alpine KTX-C10LP CAD $69.99
Bose® Acoustimass® 10 Series IV Black CAD $799.99
Phoenix Gold VRx.500 Series 2-metre (6.6 ft.) CAD $1.99
Bose® Acoustimass® 10 Series IV White CAD $799.99
Bose® Acoustimass® 16 Series II White CAD $999.99
Phoenix Gold VRx.500 Series 1-metre (3.3 ft.) CAD $1.99
Bose® Acoustimass® 16 Series II Black CAD $1,099.99
Alpine KTX-100EQ CAD $349.99
Infinity BassLink 4sc CAD $49.99