| |
 |
 |
 |
|
Easy to mount and sturdy! |
September-30-10 |
| Reviewer:
Cris
from Lake Worth, FL
|
|
I bought this product for a 42" Panasonic TV and I was warned that I shoudn't attempt to
install it on a metal-studded wall. I took the risk and I bought 1/4" togglers and the whole
installation process was a breeze. I didn't even use the studs, the whole thing is supported
by the drywall! I like the fact that the mount is really slim and saves a lot of space, looks good
and is very sturdy.
|
|
 |
|
 |
|
| |
|
|
|
|
|
Sanus wall mount |
November-20-09 |
| Reviewer:
CraigB1
from Chicago suburb
|
|
Thanks for very fast delivery. This is a high quality, very solid product. Comes with all sizes of screws, nicely sorted, for all tv's. I used it for a 37" LCD, and it fit great. I really like the fact that once tv is mounted, you can slide it left or right to center it better on the wall. Just make sure you drill into the wall studs. I used a Zircon Stud sensor Pro SL-AC, which is very good. A rachet wrench also works best to drive in the lag bolts. No need to pay more, for a great low profile mount, unless you need one that tilts.
|
|
|
|
|
|
| |
|
|
|
|
|
Excellent Product |
September-25-08 |
| Reviewer:
Steve
from Montana
|
|
I purchased this wall mount to use with my new Panasonic Plasma.
It bolted up too it just fine and the brackets didn't cover up any of the inputs on the TV. I have an access room in back of the wall where I mounted it and I cut out a section to get at all the inputs, worked great!! I highly recommend making a small room in back of your entertaiment center and TV if you are making a Theater area from scratch, it makes things so much easier to get at.
I was also able to lift the tv up on too the bracket by myself but I highly recommend you have a lift buddy to help.....
One other thing, having that access room enabled me to put in studding and blocking exactly where I needed it at to be able to put in all six lags.
|
|
|
|
|
|
| |
|
|
|
|
|
August-04-08 |
| Reviewer:
Kyle
from Elko, Nevada
|
|
Mounted to a drywall, wood stud wall. Good thing I was going to run all the cables inside the wall because the high quality cables will not bend tight enough to to clear the wall as this is a LOW profile mount. Worked perfect for the 46 inch sony. Mounting hardware 8MM screws were a bit short, nothing a trip to the hardware store did not cure easily. Looks great tucked tight against the wall. Thanks Crutchfield
|
|
|
|
|
|
| |
|
|
|
|
|
|
August-04-08 |
| Reviewer:
Mike
from Cleveland, OH
|
|
This is a sturdy, solid mount - probably overkill for my 30 pound TV. It was
easy to install - took me about a half hour to locate the studs, line up the
holes, drill, and mount. My only gripe is the mount blocks some of the
cable inputs on the back of the TV. I bought some low-profile monster
cables to resolve that issue.
|
|
|
|
|
|
|
