Crutchfield Speaker Wire

Will these work with Magnepans?

The length going to the subwoofer would not matter in this case. However, depending on the type of subwoofer and receiver, it may be an RCA cable instead of a speaker cable. For detailed help with this project, please reach out to our advisors via online chat or phone at 1-800-324-9695.

[ ZACHARY Dec 01, 2022 ] Staff

[ DANWOOD Apr 08, 2021 ]

Will these work with the Denon S-960H Receiver and Klipsch Reference R-620F?

yes is the short answer. they will work with any type of speakers.

[ julio Apr 21, 2021 ]

[ ARNOLD Jan 18, 2021 ]

5 answers

Yes, it will work. If you are a fan of klipsch sound. They sound much different than other speakers.....They are "bright"' speakers. Very clear crisp sound. I used this same type of connection for the convenience of the plug and play connection.

[ Johnny Jan 18, 2021 ]

It will have enough power (sound) for about a 16 foot square stage. But I find myself wanting more sound. Yes it'll work. Speaker wires are a bit over kill.

[ Son Jan 18, 2021 ]

Hi, yes it will.. I have Monitor Audio Bronze 6 towers connected to Yamaha A-S1100 integrated amp to them with these wires.

[ IVAN Jan 18, 2021 ]

Yes that Crutchfield speaker wire should work perfect with both that Denon Receiver and Klipsch Speaker Combo. I have been enjoying the same speakers hooked up with similar wire and an older S930H Denon receiver for 2+ years now.

[ DANIEL Jan 18, 2021 ]

I don't see why not

[ JAMES Jan 18, 2021 ]

Are the terminations soldered on? Or do they just use a screw type fastener?

[ Jared Apr 29, 2020 ]

What is the country of manufacture? I don't want to support China due to the CCP lack of transparency amid COVID-19.

Mine are screw type.

[ GERHARDUS May 07, 2022 ]

I think the simple answer is NO they are not soldered. At least I can't tell for sure. The red and black Crutchfield cylinders ends are screwed on covering the banana plugs. If you screw these off so you can see the banana plug the cable case (black and silver) is pushed all the way up in there so I can't see if they are actually soldered. However on the sides of the banana plugs under these cylinders where the cable is pushed up inside there is a screw on each side. I assume these screws are how the actual wire(s) are attached to the plug. Being someone that wants to solder all my connections, I do like these. They have worked well. About the only complaint I have is minor. It is that the banana plugs sometimes are tight and hard to push into the speaker(s). Other than that I like these and have had good luck with them in my home AV system.

[ KEVIN Apr 29, 2020 ]

[ MARTIN Apr 04, 2020 ]

How many strand wire is in each conductor?

They look like rebranded monoprice cables with different plugs. They are very good quality but probably made in china.

[ ANDREW Aug 31, 2021 ]

Not sure. I threw away the packaging after I opened it and never looked, though I try to buy American whenever possible. I also looked on the product and nothing is reflected on the cables themselves. However, it's a good product for the price.

[ Steven Wade May 19, 2020 ]

[ ANTHONY Jun 15, 2018 ]

can these speaker wires be use for outdoor speakers?

Don't know

[ John Jun 15, 2018 ]

I have no idea. I bought four of them so I could bi-amp my Definitive Techology STL towers and my Denon H6400X AVR. They do a good job. GoodHeavy cable for my stereo listening....,,,,,

[ GARY Jun 15, 2018 ]

Not sure as my speaker wire has banana plugs. Strands vary from 71 to 295 in 14 ga wire. This would probably be a question for a Crutchfield specialist. I can tell you that this wire and the banana plugs are very good.

[ LAURENCE Jun 15, 2018 ]

[ EFREM Jun 02, 2020 ]

[ Bob77375 Apr 09, 2022 ]

Yes, but don't leave them exposed for moisture/foot traffic etc.

[ wesley Jun 02, 2020 ]

These speaker cables are very well built, with a jacket shielding the actual wires. I believe they could work for outdoor speakers. I would be more worried about the terminals on the speakers themselves than the cables.

[ Donald Jun 02, 2020 ]

outdoor?

I would like to know if this cables can go inside a wall??

I wouldn't if exposed to the element's. You may just want to use standard roll of speaker wire and use bare wire to hook up instead of banana plugs

[ DONNIE E Apr 09, 2022 ]

I don't know I got mine hook up to my Home theater speaker

[ HAROLD Apr 09, 2022 ]

I only have them on my inside stereo speakers. My outdoor speakers on my deck are run with plain copper speaker wire.

[ KERRY L. Apr 09, 2022 ]

[ Abel Jan 16, 2022 ]

I'm worried about the braided outer sheath. I purchased a cable with a braided outer insulation, and it felt like glass. The cable tore up all my furniture like a giant rat-tail file, as I pulled it to my speakers. I had to return them. Is it smooth, not coarse?

I don't believed that they are inside wall certified, I've have used them for my front Dolby Atmos high speakers inside wall and I haven't had any problems with them, excellent wires. Hope this helps you.

[ Maximo Jan 17, 2022 ]

Well as a fellow consumer I'd have to say these cables have a sturdy outer casing that would stand up to being run thru a wall well so I'd feel confident using them in that way

[ ERIC EDWARD Jan 16, 2022 ]

Not sure. I used a 'Romex' (multi wire electric cable) style speaker wire for my inside wall install and made my own connections. No worries of cutting shield jacket on speaker wire. Good luck...

[ ROBB Jan 16, 2022 ]

[ Peter Mar 26, 2019 ]

can this speaker wire be ordered in longer lengths?

I have not experienced any problems.

[ ROGER Apr 02, 2019 ]

Yes it is smooth. No worries

[ Kalvin Apr 01, 2019 ]

I did not experience any negative effects of running this speaker cable. I find it ribbed but not coarse. Feed it around furniture slowly and carefully and you shouldn't have any problems. These cables produce sound as good as speaker cable costing a lot more.

[ LAURENCE Apr 01, 2019 ]

[ Carlos Mar 18, 2018 ]

Hello there, My question is : Is there any deterioration in sound quality in one of the speakers (both Spica TC-50-s) if I connect one with a 6 feet long and the other one with a 15 Ft long 14 AWG speaker wire? If yes, will the difference be obvious? Are the banana connections of your wires will work with the Spica speakers and a Rotel RX950Ax receiver? Thank you for your assistance. Gabor Meray

20ft is the longest available in the Crutchfield brand wire with the pre-attached banana connectors.

[ Ryan Mar 30, 2018 ] Staff

[ GABOR Dec 27, 2022 ]

Do you make a 3ft version?

That is a great question, Gabor. I cannot confirm for certain, but it does look like many models of the vintage Spica TC-50's have a banana connection port on the rear. Banana plugs are confirmed go on the rear of the Rotel RX950Ax, a highly favored unit for sure! For best imaging use the 15-footer in the link below for both connections, even the short one. The symmetrical cable lengths will assure the sound reaches the speakers as the exact same time. https://www.crutchfield.com/p_007CBB15/Crutchfield-Speaker-Wire-15-feet.html

[ Bo Dec 27, 2022 ] Staff

[ TRAVIS Sep 14, 2021 ]

I am currently using a bare wire connection at both the amp and the speakers. I believe it is 12 gauge wire. Is a banana plug a better connection?

I'm sorry, no. These come in 6', 10', 15', and 20'.

[ KENNETH Sep 15, 2021 ] Staff

[ GARY Apr 24, 2020 ]

Will banana plug work with speakers that have spring clips?

yes

[ WILLIAM Nov 10, 2020 ]

A banana plug allows for more contact area than bare wire and also ensures that the speaker wires do not accidentally pull out or short against the other wire.

[ Donald Jun 02, 2020 ]

[ RODNEY Apr 16, 2020 ]

will this cable be able to connect to both Audioengine speakers or do i need to buy 2 of them ?

[ JOHN Apr 17, 2020 ]

No must be screw down

[ Mr. Kenneth Apr 17, 2020 ]

[ CLAUDIA Feb 04, 2020 ]

Can these connectors be replaced with pin connectors?

You will need two cables to connect two speakers. Each cable has a positive and negative for one speaker.

[ CASEY Feb 19, 2020 ] Staff

[ Than Aug 12, 2018 ]