About the Install Bay SPHKC Speaker Installation Kit

Install Bay SPHKC kit
Install Bay SPHKC kit
Install Bay's SPHKC speaker hardware kit gives you the parts you'll need to deal with any problems installing new speakers in your vehicle. The kit supplies 3 feet of 18-gauge speaker wire as well as female spade connectors and butt connectors, which all come in handy if a speaker harness is not available for your vehicle. The included 10 feet of foam gasketing tape lets you fill gaps between your speakers and the speaker brackets or grilles to optimize bass response.
When drilling new holes in your vehicle or bracket is required, you can drill the 3/4" self-drilling wafer head screws directly into the mounting surface, while speed clips and nuts can help secure the speaker. This SPHKC kit gives you what you need to deal with the little issues that can arise when you're installing new speakers in your car.
Product highlights:
- Installation hardware package includes:
- 10-foot strip of foam gasketing tape
- 3 feet of 18-gauge speaker wire
- assortment of female quick slide terminals
- 8 butt splice connectors
- 8 speed clips and 8 speed nuts
- 3/4" self-drilling screws and 1" screws
- foam tape helps seal gaps around speaker location
- speaker wire, butt connectors, and spades can be used when a speaker harness is not available
- self-drilling screws are useful when drilling holes is required
- warranty: 1 year
- MFR # SPHKC
What's in the box:
- 10' Strip of adhesive backed foam gasket
- 3' Length of 18-gauge speaker wire
- Two 0.110" Crimp-on quick slide terminals
- Two 0.187" Crimp-on quick slide terminals
- Two 0.205" Crimp-on quick slide terminals
- Four 0.25" Crimp-on quick slide terminals
- Eight 1" Screws
- Eight 3/4" Self-tapping screws
- 8 Speed clips
- 8 Speed nuts
- 8 Butt splice connectors
Reviews (278)
Customer reviews for Install Bay SPHKC Speaker Installation Kit
Loading reviews...
Average review:
4.5 out of 5 starsCustomer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Install Bay SPHKC Speaker Installation Kit

Product Research
Package Contains
- Gasket: 10' Strip of adhesive backed foam gasket; 0.225" wide; 0.125" tall
- Speaker Wire: 3' Long; 18-gauge
- Female Quick Slide Terminals:
- Two 0.110" crimp-on quick slide terminals; for 14-18 gauge wire
- Two 0.187" crimp-on quick slide terminals; for 14-18 gauge wire
- Two 0.205" crimp-on quick slide terminals; for 14-18 gauge wire
- Four 0.25" crimp-on quick slide terminals; for 14-18 gauge wire
- Screws:
- Eight 1" Screws; steel; 0.16" diameter thread; 0.37" diameter head
- Eight ¾" Self-tapping screws; steel; 0.16" diameter thread; 0.4" diameter head
- 8 Speed Clips
- 8 Speed Nuts
- 8 Butt Splice Connectors: for 14-18 gauge wire
Loading accessories...
Customer Q&A
1 question already asked
Loading articles...
Nice kit of odds and ends. Didn't use most of it, but a few spare parts were handy to have for workarounds to a relatively standard install.
Frank from Edmonds, WA