About the Pioneer TS-A709
Don't overlook this little speaker
More and more automakers like Toyota, GM, and Chrysler equip their vehicles with 2-3/4" speakers in the dash, and Pioneer has the perfect upgrade. These Pioneer TS-A709 2-3/4" 2-way speakers flaunt surprising power-handling and solid construction. A carbon and mica-reinforced, injection-moulded polypropylene woofer adds sturdiness to your sound while the polyetherimide tweeter steps up the detail. Pioneer includes inline high pass filters with high-quality capacitors to protect the speakers from any damage that lower frequencies can cause. Overall, you can look forward to more clarity from your tunes than with your factory speakers.
Product highlights:
- 2-3/4" carbon and mica-reinforced injection-molded polypropylene midrange speakers
- polyetherimide dome tweeters
- inline crossovers
- handles up to 100 watts RMS (450 watts peak power)
- frequency response (using included inline crossover): 850-34,000 Hz
- sensitivity: 82 dB
- woofer top-mount depth: 1-5/16"
- grilles not included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # TS-A709
What's in the box:
Pioneer TS-A709 owner's manual
- Two 2-way speakers
- Two 10" lengths of speaker wire with in-line high pass crossover (female quick slides on one end and unterminated wire on the other)
- Warranty information
- Specs printed on box
Reviews
Customer reviews
Loading reviews...
Pioneer TS-A709 reviews
Average review:
Customer photos
More details on the Pioneer TS-A709
Features & specs
| General | ||
|---|---|---|
| Speaker Size | 2 3/4 | |
| Design | 2-way | |
| Tweeter Design | 16mm Dome | |
| Impedance (Ohms) | 4 | |
| Tweeter Composition | Polyetherimide | |
| Woofer Composition | Carbon and Mica reinforced IMP | |
| Woofer Surround | Rubber | |
| Parts Warranty | 1 Year | |
| Labor Warranty | 1 Year | |
| Specifications | ||
| Sensitivity (1W at 1 meter) | 82 | |
| Sensitivity at 2.83 volts | N/A | |
| Frequency Response | 850 - 34k Hz | |
| Minimum RMS Wattage | --- | |
| Maximum RMS Wattage | 100 | |
| Peak Power Handling (Watts) | 450 | |
| Top-mount Depth (Inches) | 1 5/16 | |
| Bottom-mount Depth (Inches) | 1 3/8 | |
| Cutout Diameter or Length (inches) | 2 3/8 | |
| Mounting Height (Inches) | 0.219 | |
Product Research
Features
Overview: Pioneer describes the TS-A709 as a wide range speaker (as opposed to a full range speaker), designed to replace the 2¾" tweeter used by several vehicle manufacturers. Please enter your vehicle information to confirm fit.
Crossovers: A 6 dB/octave, 850 Hz high-pass crossover is integrated in-line with each included 10" length of speaker wire. The output end of the wire has quick slides that plug onto the speaker terminals; the input end of the wire is not terminated. At the widest point the crossovers measure just under ¾" across.
Power: The 100 watt RMS power rating is valid only when using the included crossovers.
Frequency Response: The published frequency response is 101 Hz to 34 kHz (-20 dB), but the -3 dB point on the included high pass crossover is 850 Hz. (The included crossover should always be used, unless the speakers are actively filtered.)
Loading accessories...
Customer Q&A
Loading articles...
This little speakers brought forth amazing clarity from the stock Toyota receiver. Music sounds much cleaner and clearer. Especially vocals, and drums. So much sharper and enriched sound! Easy install in a 4-Runner! No mods needed!
John from Flagstaff, AZ