JL Audio Stealthbox®

Features

Overview: JL Audio's Stealthbox subwoofer systems are designed to hide away in a specific vehicle. Please consult "Outfit My Car" to confirm compatibility with your vehicle.

Enclosure Construction: Stealthboxes are hand-crafted from fiberglass and/or Advanced Molded Composite (AMC) materials. Fiberglass delivers a level of enclosure rigidity and dimensional stability not possible with other enclosure materials, allowing wall thickness to be reduced compared to a typical wood enclosure. This gives you more interior box volume for a given external volume. Fiberglass and AMC materials are very strong and can be molded into very complex shapes; giving JL Audio the ability to design your Stealthbox to fit perfectly into tight spots and minimize intrusion into your vehicle's useful space. Each Stealthbox is laminated, ground, joined, and finished by hand in the USA. Proprietary techniques and materials developed by JL Audio through years of fiberglass manufacturing experience ensure consistent quality and performance.

Thin-Line Woofer: This JL Audio Stealthbox contains one JL Audio 13TW5v2 Thin-Line subwoofer in a sealed enclosure. The 13TW5v2 supports up to 600 watts power (RMS) with a recommended amplifier power range of 250-600 watts. The enclosed 13TW5v2 is a 4-ohm woofer and is wired for a 4-ohm mono load at the enclosure's speaker terminal.

• Thin-Line Design: The patented thin-line woofer technology compresses the architecture of the JL Audio 13TW5v2 subwoofer and allows it to deliver great bass performance in the tightest space applications that are only 2.5" deep. Central to the technology is the "concentric tube" structure that supports the oversized voice coil and the suspension attachments. This permits placing the motor of the woofer much further forward in the speaker than with conventional designs, while maintaining excellent linear excursion capability. Equally important is the fact that the 13TW5v2 design is optimized for extremely small box volume applications. Whereas a typical "small-box" 12-inch driver operates in well over one cubic foot, the larger 13TW5v2 is optimum in only 0.80 cu.ft. (significantly less volume than any other JL Audio 13-inch woofer).
• Concentric Tube Suspension: The challenge in any low-profile woofer design is to permit enough mechanical clearance for the speaker to handle power and generate good output at low frequencies. JL Audio's patented solution employs a molded structure which spans over the edge of the motor system, supporting the spider on the outside of the motor's boundaries and the large diameter voice coil on the inside. The large voice coil permits the magnet to sit inside it, rather than surrounding the coil as is typical in most woofers. The concentric tube structure and the elimination of a conventional top-plate helps JL Audio to place the motor system higher up into the cone body's space to further compress depth, while still permitting excellent mechanical excursion.
• Mica-Filled Polypropylene Woofer: The JL Audio 13TW5v2 subwoofer features an injection-molded, mica-filled polypropylene cone woofer with a santoprene rubber surround for added durability, woofer excursion and bass response.
• Dynamic Motor Analysis (DMA): DMA is JL Audio's proprietary method aimed at improving dynamic motor behavior. As a result of DMA optimization, the 13TW5v2 motors remain linear in motor force over a very long range of excursion, and also maintain a highly stable fixed magnetic field in the gap over a wide power range. The result is vastly reduced distortion, faithfully reproduced transients, and tight, clean, articulate bass.
• Floating Cone Attachment Method (FCAM): JL Audio's patented FCAM technology is an innovative method of bonding the surround/cone assembly to the voice coil/spider assembly. This assembly technique ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.
• Extra Large Voice Coils: To counteract the efficiency tradeoff of small box volumes, the 13TW5v2 is designed to handle very high power levels thanks to the use of a very large 7-inch diameter voice coil.

Installation: This Stealthbox installs behind the rear bench of your 2007-up Toyota Tundra CrewMax. One notch of the seat travel is lost with installation and full-recline of the seat-back is only available when the seat is in its more forward positions. If the vehicle is equipped with the factory JBL subwoofer, you must do one of the following to install the Stealthbox: A) Permanently modify (cut) the factory trim panel. B) Obtain a replacement "no-subwoofer" trim panel from Toyota Parts prior to installation.