About the Kicker CompRT 43CWRT81
A thin sub with fat bass
A thin sub with fat bass
If you're looking for bass for a tight space, Kicker designed their CompRT subs with compact cars, pickup trucks, and ATVs in mind. The low-profile 43CWRT81 8” subwoofer performs just like a full-size sub, but without killing all your cargo space. This high-performance CompRT sub stands less than 3" tall, so your installation options are wide open.
Built with boom in mind
The 43CWRT81 comes equipped with a rigid injection-molded polypropylene cone that won't flex and cause distortion while you're cranking the bass. Its rubber surround will last through years of heavy use, combining with a special-design back and top plate to give you more excursion (which equals more bass) than other skinny subs.
Made to work with many systems
This sub handles up to 300 watts RMS so make sure you've got a solid amp to power it. You can wire the dual voice coils for either 2- or 1/2-ohm total impedance, giving you more wiring options when setting up your system. This versatile sub sounds great in sealed or ported enclosures.
Important Note: If you are wiring this DVC sub for extremely low impedance, make sure that your amp is compatible. You can damage or destroy your amp by exceeding recommended minimum impedance.
- 8" subwoofer with dual 1-ohm voice coils
- injection-molded polypropylene cone
- rubber surround
- power handling: 300 watts RMS
- peak power handling: 600 watts
- frequency response: 30-500 Hz
- sensitivity: 81.8 dB
- top-mount depth: 2-11/16"
- sealed box volume: .20 - 1.0 cu. ft.
- ported box volume: .80- 1.2 cu. ft.
- grille not included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 43CWRT81
What's in the box:
- One 8" Dual 1-ohm voice coil subwoofer
- Kicker logo sticker
- 4 Adhesive backed screw covers
- Manual (English/ Spanish/ German/ French)
- Template on box
More details on the Kicker CompRT 43CWRT81
Features & specs
|Impedance (Ohms)||0.5, 2|
|Ideal Sealed Box Volume (cubic feet)||N/A|
|Ideal Ported Box Volume (cubic feet)||N/A|
|Port diameter (inches)||N/A|
|Port length (inches)||N/A|
|Dual Voice Coil||Yes|
81.83 dB at 1 watt |
|Frequency Response||30 - 500 Hz|
|Max RMS Power Handling||300|
|Peak Power Handling (Watts)||600|
|Top Mount Depth (inches)||2 5/8|
|Bottom Mount Depth (inches)||3 1/2|
|Cutout Diameter or Length (inches)||6 15/16|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Dual Voice Coils: This woofer features dual 1Ω voice coils, offering wiring flexibility. When the voice coils are wired in parallel, the woofer presents a 1/2Ω load. When the voice coils are wired in series, the woofer presents a 2Ω load.
Shallow-Mount: Kicker's CompRT series is designed to minimize depth, giving you subwoofer options where standard enclosures don't fit. The vent-less, solid-pole design allows the woofer to be mounted directly against the rear wall of a sealed enclosure.
All-Weather: Although not marine certified, Kicker describes the CompRT series as weatherproof.
Sealed Enclosures: Sealed enclosures provide the most control over a woofer and provide accurate sonic reproduction, making them suitable to all types of music. Kicker recommends sealed enclosures from 0.2 ft³ to 1.0 ft³.
Vented Enclosures: Vented (or ported) enclosures typically provide better overall efficiency than sealed so they are suitable for use with smaller amplifiers, giving you more bass output from less power. Kicker recommends ported enclosures in the following range:
- Minimum Enclosure Volume: 0.8 ft³ with an 8" x 1-1/2" x 20-3/4" slot port
- Maximum Enclosure Volume: 1.2 ft³ with an 8" x 2" x 19-1/8" slot port
22 questions already asked