Contact us
Close contact box
Connect ID #
454 003 39
Connect ID #
454 003 39

Sorry, chat is currently unavailable

Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

GoldenEar Invisa 650 In-ceiling speaker

Item # 317INVS650

This stealthy in-ceiling speaker delivers GoldenEar's signature sound without taking up any shelf or floor space.

This stealthy in-ceiling speaker delivers GoldenEar's signature sound without taking up any shelf or floor space.

Item # 317INVS650

In stock
C$595.00 each

Other options

About the GoldenEar Invisa 650

Kramer Crane

Dynamic GoldenEar sound with zero footprint

In-ceiling speakers like GoldenEar's Invisa 650 are an excellent choice for enjoying music and movies without taking up shelf or floor space. If you're building a GoldenEar home theatre, a pair of the Invisa 650s are a particularly good option for your system's Dolby Atmos® overhead effects channels.

Dynamic GoldenEar sound with zero footprint

In-ceiling speakers like GoldenEar's Invisa 650 are an excellent choice for enjoying music and movies without taking up shelf or floor space. If you're building a GoldenEar home theatre, a pair of the Invisa 650s are a particularly good option for your system's Dolby Atmos® overhead effects channels.

Crisp bass and textured midrange come courtesy of a 6-1/2" polymer woofer, while a HVFR™ (High-Velocity Folded Ribbon) tweeter dishes out ultra-smooth, ultra-revealing highs. 

A unique tweeter yields superb sound

The Invisa 650's HVFR tweeter is actually a trickle-down technology borrowed from GoldenEar's top-of-the-line Triton Series. It uses neodymium magnets to squeeze and pressurize the air and move a high-density Kapton film diaphragm. 

This no-resonance, low-distortion design helps the tweeter reach an astonishingly high 35,000 Hz while keeping a smooth, detailed response — even at high volume. There's almost no moving mass, so it isn't subject to the piston-like issues of traditional dome-style tweeters (namely, "wobble" or distortion). The resulting sound is terrific, with a wide soundstage and pinpoint stereo imaging.

DIY installation

If this is a do-it-yourself install, check out our guide to installing in-ceiling speakers, along with our selection of in-wall speaker wire. You can paint the included magnetic grille to have your speaker blend in with your décor.

Who is GoldenEar?

Since their founding in 2010, GoldenEar has racked up rave reviews across the audio industry for their high-tech speaker lineup and cutting-edge design philosophy. The company's goal is to create speakers that sound better than comparable models costing three, four, or even five times more. Their signature sound includes pinpoint stereo imaging, a spacious three-dimensional soundstage, and ultra-low distortion. Each of GoldenEar's custom-designed drivers, passive radiators, and carefully tuned cabinets help create an ultra-immersive listening experience with your favourite albums and movie soundtracks.


Product highlights:

  • ideal for an in-ceiling music system or overhead surround effects in a home theater system
  • 6-1/2" marble-infused polymer woofer for tight bass and articulate midrange
  • HVFR (High-Velocity Folded Ribbon) tweeter for natural and revealing highs
    • tweeter is aimable to direct high-frequency details towards you
    • multi-position tweeter level control cuts or boosts high-frequency output to best match your room's acoustics
  • frequency response: 25-35,000 Hz
  • recommended amplifier power: 10-250 watts
  • sensitivity: 90 dB
  • nominal impedance: 8 ohms
  • ultra-thin bezel and paintable magnetic round grille provide seamless integration into your décor
  • optional pre-construction brackets help provide a precise, secure installation
Dimensions and warranty:
  • cutout diameter: 7-3/16"
  • overall diameter: 8-3/4"
  • mounting depth: 3-9/16"
  • weight: 4 lbs.
  • warranty: 5 years
  • MFR # DKQA

What's in the box:

  • In-ceiling/In-wall loudspeaker
  • Grille
  • Owner's Manual
  • Cut-Out Template
  • Cardboard Paint Shield

Customer reviews for GoldenEar Invisa 650

Loading reviews...

Average review:

5.0 out of 5 stars
5 reviews

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on

This review was collected as part of a promotion



Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the GoldenEar Invisa 650

Stacey B.

Features & specs

Quantity in Package Single
Tweeter Folded Ribbon
Aimable Tweeter Yes
Woofer Composition Marble-Infused Polymer
Woofer Surround Rubber
Connector Type Spring post
Bi-Amp Inputs No
Built-in Back-box No
Moisture Resistance
Indoor (Moisture-resistant) No
Outdoor (Partial Exposure) No
Outdoor (Full Exposure) No
Tweeter Size ---
Midrange Size N/A
Speaker Shape Round
Woofer Size 6.5
Cutout Width 7.1875
Cutout Height 7.1875
Mounting Depth 3.5625
Power Range (Watts) 10-250
Sensitivity 90 dB
Impedance (Ohms) 8
Frequency Response 25-35kHz
Parts Warranty 5 Years
Labor Warranty 5 Years

Product Research


High Velocity Folded Ribbon (HVFR) Tweeter: The Invisa 650 features GoldenEar Technology's High-Velocity Folded Ribbon (HVFR) tweeter. The HVFR tweeter propagates sound waves and moves the air by squeezing it with its accordion-like pleated diaphragm, rather than pushing it as conventional drivers do. The result is better impedance matching to the air in the room with greater control, smoother more extended response with lower distortion and dramatically improved dynamic range. The tweeter is aimable and offers an integrated High Frequency EQ.

  • Aimable Tweeter: The Invisa 650 speaker incorporates an aimable tweeter assembly to compensate for less than ideal placement situations, and to allow for an effective "toe-in" for in-wall applications. If your installation location is such that the primary listening area is well off axis from the speaker, the tweeter assembly can be rotated and tilted to allow it to be better aimed at the listening area.
  • High Frequency Equalization (HF EQ): Built-in high frequency equalization helps with integrating the Invisa 650 speaker into your room, regardless of the reflecting and/or absorbing surfaces you may have in your room. If you have a typical listening room with a balance of reflecting and absorbing surfaces, then start with the HF EQ control in the center position. If your listening room is overly "bright" due to many reflective and hard surfaces, then select the "-" position to effectively compensate for this type of room acoustics issue. If your listening room is filled with heavy furniture and fabrics or you are sitting fairly far from the speakers, making the sound seem "dull", select the "+" position to compensate for this type of room acoustics issue.

One-Piece Driver/Frame/Flange Assembly: The Invisa 650 utilizes a one-piece driver/frame/flange assembly. The 6.5" high-definition, wide-dispersion woofer is built as an integral part of the Invisa 650's frame/flange assembly to minimize footprint. The 6.5" woofer utilizes a proprietary computer optimized cone topology and is constructed of marble-infused polymer for an exceptional rigid cone that is extremely linear. The high-definition, wide-dispersion woofer also features a 1" high-temperatur Kapton Former voice coil and a High-Gauss Magnet Assembly for high power handling.

Complex Multi-Element Crossover Network: The GoldenEar Technology Invisa 650 incorporates a complex multi-element crossover to precisely blend the drivers for seamless, precise, and natural sound quality.

Magnetically Attached Micro-Perf Grille: The Invisa 650 has a flat, round, magnetically attached micro-perf grille that covers the mounting flange for an attractive, nearly "invisible" look. This low-profile grille only protrudes 0.1875" from the ceiling or wall. The micro-perf grille is white in color, but can be painted to blend in better with the color of your ceiling or wall. An optional square grille is also available (see Accessories Tab).

Spring-Post Terminals: The GoldenEar Technology Invisa 650 in-ceiling/in-wall speaker is outfitted with a set of high-quality spring-post terminals that will accept bare wire (up to 12AWG), pin-connectors, and banana plugs (single only).

Home Theater & Music Applications: The GoldenEar Technology Invisa 650 speaker is designed to work beautifully in a wide variety of applications. The Invisa 650 can be used as a main front left, main front right, center, surround or height speaker in a home theater system; as front left and right stage speakers of a 2ch music setup; or as part of a distributed audio system.

  • Front Speaker Placement: The front speakers should be positioned evenly on either side of the TV or projector screen. The front speakers should form an equilateral triangle with the main listening position. In the case of an in-wall installation, make sure the speakers are positioned at ear level when sitting in the main listening position.
  • Center Speaker Placement: Position the center-channel speaker between the left or right speakers and directly above or below the center of the TV or projector screen.
  • Surround Speaker Placement: When used as surround speakers in a home theater system, the Invisa 650 may be located on the side, above, or behind the listeners. When used on the side, take care never to locate the the speaker forward of the listeners. If the speakers are installed in the rear wall as surrounds, it is suggested that they be positioned fairly wide apart if possible. In-wall surround speakers can be installed at ear level or above ear level. In-ceiling installation in the rear corner of the main listening area is also a good surround speaker location.
  • Distributed Audio Placement: For In-Ceiling applications for "whole-home" music playback, position speakers in stereo left/right pairs so they are approximately as far apart as the distance to the average listeners' positions. For very large spaces, you may wish to install additional stereo pairs of speakers approximately every 20 to 25'.

Mounting Options: The Invisa 650 can be installed in the ceiling or a wall. It requires a round, circular cutout that measures 7.1875" in diameter and 3.5625" in depth. Four integrated locking-arms secure the speaker to the ceiling or wall. The locking-arms support a 0.25" to 1" thick ceiling or wall surface. Allow at least 0.875" of clearance around the inside edge of the cutout to accommodate the locking arms. Allow at least 0.75" of clearance around the outside edge of the cutout to accommodate the speaker frame and grille. An optional rough-in bracket is available for new construction (see Accessories Tab).

  • When installing the speaker in a wall, the tweeter should be at approximately ear level for the most accurate and natural imaging. Make sure to select locations that allow the sound to reach the listening area unobstructed by furnishings.
  • Placing the speaker in a corner will over-emphasize bass and reduce overall clarity. If possible, position the speaker away from side walls. This will ensure better bass performance and optimal midrange clarity

Note: When preparing to install the in-ceiling speaker, pick a location that has the required clearance between ceiling joists. Make sure to check for wiring, conduit, water pipes, HVAC ducts and other obstructions before cutting the installation hole.

Invisa Series: GoldenEar Technology's Invisa Series architectural speakers are engineered to deliver superb state-of-the-art sound quality, designed to blend perfectly with their surroundings and virtually disappear. The Invisa Series consists of three in-ceiling speakers (Invisa 525 / Invisa 600 / Invisa 650), a stereo input in-ceiling speaker (Invisa SP 652), a home theater engineered in-ceiling speaker (HTR 7000 / HTR 8000), a home theater engineered LCR in-wall speaker (SPS), and a home theater engineered surround in-wall speaker (MPX) - all sold separately.

Loading accessories...

Customer Q&A

Loading articles...

Compare the sound