About the Alpine SPV-65-JLT
Important: This speaker system is not compatible with factory-powered (OEM amplfied) systems.
Upgrade your Jeep's soundbar
Alpine promises good times for the gang in the backseat of your 2018-up Wrangler or your 2020-up Gladiator with this awesome speaker upgrade. Alpine's SPV-65-JLT component speaker system lets you upgrade the factory 3" and 4" speakers in your rear soundbar with 6-1/2" polymer woofers and 1" tweeters. Alpine has also designed this weather-resistant system to endure the environmental harshness of life in your Jeep, even when the top is off.
This 6-1/2" component system lets you use factory bolt holes and gives you two weather-resistant woofer cones and 1" Teteron dome tweeters. Alpine provides vehicle-specific connectors for easy installation, and premium grilles for a great look. Get ready for a serious sonic step-up.Important Installation Note: You'll have to enlarge the 4" openings in your soundbar to accept the larger 6-1/2" speakers, and Alpine includes a template for cutting the plastic. If you haven't attempted a project like this before, you should consult a professional installer.
- compatible with select 2018-up Jeep Wrangler and 2020-up Jeep Gladiator models
- package includes:
- 6-1/2" polymer woofers
- 1" Teteron dome tweeters
- speaker grilles
- vehicle-specific connectors
- template for cutting
- handles up to 90 watts RMS (225 watts peak)
- uses factory bolt holes
- modification required
- IP55 weather-resistant rating
- sensitivity: 87.8 dB
- impedance: 4 ohms
- warranty: 1 year
- MFR # SPV-65-JLT
What's in the box:
- One right speaker
- One left speaker
- Eight M4x20mm Machine screws (5mm Allen head)
- 2 Pollyfill sheets (10" x 13")
- Warranty information
- On-line product registration information
- Important Notice sheet
- Installation manual
Customer reviews for Alpine SPV-65-JLT
More details on the Alpine SPV-65-JLT
Features & specs
|Tweeter Design||1" Dome|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||87.8|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||50 - 22k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||90|
|Peak Power Handling (Watts)||225|
|Top-mount Depth (Inches)||2 3/4|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||5 1/2|
|Mounting Height (Inches)||1.42|
Overview: Alpine's SPV-65-JLT component speakers are designed for select 2018 and later Jeep Wrangler/Wrangler Unlimited models (JL body style) and 2020 and later Jeep Gladiator models. Each woofer/tweeter pair in this component set is mounted to a plate, which includes a grille covering both. They mount in the soundbar location and are compatible with the non-amplified factory sound systems (without the factory Alpine system).
Note: In 2018 Jeep built two versions of the Wrangler and Wrangler Unlimited, the JK (older body style) and the JL (new body style). These Alpine speakers fit the newer JL body; they do not fit the older JK body.
Wiring: These Alpine speakers have the same input plug as the Jeep factory woofers, so the factory harness is directly compatible. No cutting into the factory wiring is required.
Modification: The panels behind the factory grilles must be modified to accommodate the larger Alpine woofers. A template to mark the cut patterns is included. Once the soundbar is modified, the factory speakers cannot be reinstalled.
4 questions already asked