About the iDatalink KIT-CAM1 Dash and Wiring Kit
iDatalink KIT-CAM1
iDatalink KIT-CAM1
Your Camaro is a great car, but the factory radio leaves something to be desired. The KIT-CAM1 dash and wiring kit allows you to install an iDatalink-ready car stereo in the dash panel, while maintaining your Camaro's climate controls, OnStar, backup camera, aux input, and other features. You'll also need iDatalink's Maestro ADS-MRR module (not included) for this installation.
Customizable controls
iDatalink's KIT-CAM1 package includes a dash console that matches the fit and finish of your Camaro's dash. You can operate your climate controls from your receiver's touchscreen and the customizable buttons built into the iDatalink dash console. The kit also includes a panel with 2 USB ports, an HDMI port, and a 3.5mm A/V input.
Keep your factory features
The included wiring harness lets you keep your factory amplifier (if equipped) and steering wheel audio controls, as well as your secondary display's functions including audio information, hands-free info display, and navigation information. Your new radio will also display gauge information, parking assist distance, and other vehicle information.
Product highlights:
- allows installation of new iDatalink-ready receiver in select Chevrolet Camaro vehicles
- requires the Maestro ADS-MRR module (sold separately)
- retains the use of your steering wheel audio controls, OnStar, factory amp, aux input, and backup camera
- retains your secondary display (with phone call, audio, and navigation information)
- displays engine performance and other data on new car stereo's touchscreen
- warranty: 1 year
- MFR # KIT-CAM1
What's in the box:
iDatalink KIT-CAM1 Dash and Wiring Kit owner's manual
- Dash kit
- Resistor plug
- External chime module
- Wiring harness
- Backup camera harness
- OBDII harness
- Antenna adapter
- 2 Brackets
- 6 Self-tapping screws
- 2 Machine screws
- Quick Start Guide
Customer reviews for iDatalink KIT-CAM1 Dash and Wiring Kit
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsCustomer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the iDatalink KIT-CAM1 Dash and Wiring Kit
Product Research
Features
Chevy Camaro Integration Dash Kit & Vehicle Harness: The iDatalink Maestro KIT-CAM1 consists of an integration dash kit and vehicle harness designed specifically for select 2010-2015 Chevy Camaros (all factory radio trim levels). In combination with the iDatalink Maestro RR or RR2 Car Radio Replacement Interface module (sold separately) the KIT-CAM1 lets you replace the factory radio of your 2010-2015 Chevy Camaro with a compatible Alpine, JVC, Kenwood, Sony, or Pioneer aftermarket head unit equipped with an iDatalink Serial Port.
- Vehicle Compatibility: Click here for a list of compatible Chevy Camaro vehicles.
- Radio Compatibility: Click here for a list of compatible aftermarket radios with an iDatalink Serial Port.
Note: The iDatalink Maestro KIT-CAM1 requires the purchase of the iDatalink Maestro RR or RR2 (sold separately) and the download of a vehicle specific firmware from iDatalink's Weblink Desktop (for Windows and Mac).
Head Unit Connection: The KIT-CAM1 supports iDatalink's Direct T-Harnesses (sold separately) for direct connection to select iDatalink Serial Port compatible head units (including Kenwood, JVC, Alpine, Sony, and Pioneer radios) - replacing the wiring harness that comes with your aftermarket stereo (some hardwiring may still be required). If connecting to an aftermarket head unit that does not support an iDatalink Direct T-Harness, you'll need to cut off and remove the 20-pin black connector from the KIT-CAM1's harness and splice each wire directly to the aftermarket radio's corresponding wire.
Factory Grade Dash Kit: The KIT-CAM1's dash kit features a factory grade fit & finish to match the contour and color of your Chevy Camaro's dash. The dash kit will fit select Double-DIN Alpine, JVC, Kenwood, Sony, & Pioneer aftermarket radios with an iDatalink Serial Port. The kit features integrated climate control & hazard buttons. In addition, the dash kit provides flush-mounted dual USB ports (one USB-A and one USB-C), one HDMI input, and one Aux 3.5mm input for your head unit (if applicable).
Retained Features: The follow factory features (if applicable) are retained when replacing your aftermarket head unit with a compatible iDatalink Serial Port head unit from Alpine, JVC, Kenwood, Sony, or Pioneer using the Maestro RR or RR2 car radio replacement interface module and KIT-CAM1 installation package.
- Factory Amplifier & Sub: Retains factory amplifier and sub with turn-on, fader, gain, & DSP control.
- OnStar & Bluetooth Hands-Free: The vehicle's factory OnStar emergency services system, along with facotry Bluetooth hands-free can be retained.
- Climate Display & Control: The factory climate display and control can be accessed from the touchscreen of your compatible iDatalink aftemarket head unit
- Vehicle Settings: Access and modify factory vehicle settings through the compatible aftermarket head unit's touchscreen.
- Secondary Vehicle Display: Secondary vehicle display is retained (if factory equipped) with audio information, hands-free information, and internal navigation.
- Steering Wheel Controls: Factory steering wheel controls are retained with two function buttons and expandable radio functions.
- Backup Camera & Park Assist: Factory backup camera is retained with dynamic parking guidelines and park assist chimes (chime speaker included); your aftermarket head unit must have a composite video rearview camera input. If you add an aftermarket front and/or side cameras (sold separately) to your idatalink compatible head unit that is equipped with multiple camera inputs, the vehicle's factory auto camera switching feature is also retained.
- RAP & Warning Chimes: The vehicle's RAP (Retained Accessory Power) & Warning Chimes (external chime module included) are both retained.
Extra Features: The following Extra features are added when replacing your aftermarket head unit with a compatible iDatalink Serial Port head unit from Kenwood, JVC, Pioneer, Sony, or Alpine using the Maestro RR or RR2 Car Radio Replacement Interface module and KIT-CAM1 installation kit.
- Vehicle Info: Tire Pressure Display, Battery Voltage Display, Read/Reset Engine Codes, and Door Open Status with Warning.
- Gauges: Selectable Performance Gauges, "Track Pack" Gauges, and Read/Reset Check Engine Codes.
Outputs: The KIT-CAM1 provides Navigation, Accessory Power, and Illumination Outputs to make installation simpler.
- Navigation: Parking Brake, Reverse Light, and VSS (Vehicle Speed Sense).
- Accessory Power Output: 12V/15A Accessory Power Output
- Illumination Output: Illumination Output
Loading...
Loading accessories...
Customer Q&A
10 questions already asked
Loading...
Loading articles...
Excellent product. Now if you a beginner in car audio installation the amount of wiring may seem a little over whelming but this product's ability to integrate all of my cars features such as the rear view camera, heated seats and A/C controls made this a must have. Highly Recommended
Robert from ROSENBERG, TX