About the StreetWires Power Station PSK08Bi
StreetWires Power Station amp kits provide the insulated power cables, fuses and connectors you need to install your amplifier and add an impressive, professional edge to your installation. Fine-strand, silver-plated oxygen-free wire reduces interference, so your power flows clean and pure at higher power levels.
The Power Station PSK08Bi amp wiring kit handles amplifier systems with a rating of up to 300 watts, and includes a stereo patch cable with built-in turn-on lead for hooking up the audio signal from your receiver. Each 8-gauge power and ground cable is protected by a durable, Poly Flex jacket, and the cables are finished with nickel-plate ring terminals for a secure connection to your amplifier. Streetwires also includes a firewall bushing, and assorted connectors and cable ties.
Note: One stereo patch cable is provided you'll need a second patch cable if you're installing a 4-channel amp.
Product highlights:
- amplifier wiring kit with power, ground, and audio connections
- 18-foot 8-gauge blue power cable with ring terminals
- 4-foot 8-gauge silver ground cable with ring terminals
- 16-foot RCA patch cable (clear jacket, silver conductors, molded black connectors) with turn-on lead
- AFS in-line fuse holder and 60-amp AFS fuse
- assorted connectors, spade terminals, and wire ties
- warranty: lifetime
- MFR # PSK08BI
What's in the box:
StreetWires Power Station PSK08Bi owner's manual
- One 18' length of 8-gauge power wire in a translucent blue jacket (has attached battery ring terminal)
- One 4' length of 8-gauge ground wire in a clear jacket (has attached ring terminal)
- 16' Interconnect cable with turn-on wire (has left and right RCA audio connectors on each end)
- In-line AFS fuse holder
- One 60-amp AFS fuse
- Two 8-gauge crimp-on spade terminals (one has a black insulator boot and one has a translucent blue insulator boot)
- One 18-gauge crimp-on spade terminal (has a translucent blue insulator boot)
- 1 Red butt connector
- Six 4.5" wire ties
- Instructions on package
Customer reviews for StreetWires Power Station PSK08Bi
Loading...
Loading reviews...
Average review:
4.0 out of 5 starsCustomer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the StreetWires Power Station PSK08Bi
Product Research
Features
General Overview: This is a single amplifier wiring kit that includes the power and ground cables, interconnect cable with integrated turn-on lead, and accessories required to install one amplifier. Speaker wire is sold separately.
In-line Fuse Holder: The in-line fuse holder is waterproof and comes with a 60-amp AFS fuse. The fuse holder's set screw input and output accept bare 8-gauge wire (no ring terminal required). Integrated tabs allow you to mount the fuse holder using optional self-tapping screws. The fuse holder has the following dimensions: L=3.218", W=1.887" (including integrated mounting tabs), H=0.994".
Note: The set screws require a 3mm Allen wrench.
Power and Ground Cables: The 8-gauge power cable has a translucent blue insulation jacket while the 8-gauge ground cable has a clear insulation jacket.
Interconnect Cable: The interconnect cable has a clear insulation jacket. An 18-gauge wire is attached to the interconnect cable for use as a remote turn-on lead, so you don't have to run an extra wire.
Crimp-on Terminal Dimensions: The crimp-on terminals have the following dimensions:
- Power Ring Terminal (installed): W=0.592", Inner Diameter=0.335"
- Ground Ring Terminal (installed): W=0.477", Inner Diameter=0.216"
- 8-gauge Spade Terminals: W=0.327", Prong Spacing=0.152"
- 18-gauge Spade Terminal: W=0.273", Prong Spacing=0.147"
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Pro: Great Kit I like that the ground and power already have one side crimped. And patch cable has the remote wire ran alonge with it Con: The cables could be just a little longer and it could come with a extra fuse
Aaron from Oklahoma