Chat
Contact us
Close contact box
Connect ID #
178 975 59
Connect ID #
178 975 59

Sorry, chat is currently unavailable

Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

2007-2013 Toyota Tundra Double Cab

How to upgrade the stereo system in your Tundra

2007 Toyota Tundra Double Cab

In brief: This Crutchfield Research Garage article gives you an overview of your Tundra's stock stereo system and your aftermarket upgrade options. We'll tell you all about:

Then, use our vehicle selector to find the gear that will fit your truck.

Overview of the Toyota Tundra Double Cab

When it comes to pickups, bigger isn't always better – but it sure can be helpful. Toyota spent years building tough, reliable trucks like the HiLux and the Tacoma, but as good as they were (which was very), small- to medium-size trucklets weren't quite enough in a country where full-size pickups generally sell faster than most cars – including Toyota's own Camry.

Toyota knew that if they were going to play with the big kids, they needed a big truck. The second-generation Tundra is big enough, tough enough, and strong enough to go head-to-head with the best of the Big Three. It's also a Toyota, though, which means the Tundra was available with a lengthy list of available features, including a not-bad factory JBL stereo system.

Bigger is almost always better when it comes to stereos, though. If you're looking to upgrade your Tundra's sound system, Crutchfield has the equipment and advice you need.

Toyota Tundra factory stereo

The Tundra's factory stereo (Crutchfield Research Photo)

The factory stereo system

The Tundra Double Cab had the option for either bench or bucket seats, depending on the owner’s preference. If you have the bucket seats, you'll need to disassemble the center console when you're replacing the factory radio.

Regardless of the interior setup, Toyota offered two different radio options in the Double Cab truck: an in-dash AM/FM/CD unit or the same radio with an in-dash 6-disc changer.

You could also choose between the standard 6-speaker system or an upgraded JBL system that features twelve speakers (including an 8" subwoofer) powered by a 440-watt amplifier.

Detailed stereo and speaker removal instructions

MasterSheet image
With step-by-step disassembly instructions and plenty of up-close, detailed photos, our exclusive Crutchfield MasterSheet™ takes the guesswork out of removing the factory stereo and speakers. It's free with your Crutchfield order, or you can purchase one separately for just $9.99.

Removing the factory radio

Removal and replacement of the factory stereo is somewhat complex because the dash enclosure employs a host of trim panels and accessory systems that you will have to contend with.

It'll take some time to remove the stock radio. The process begins with the removal of the interior knee panel and the cup-holder assembly, and also includes removing the ashtray, displacing and disconnecting the heater control panel, displacing the entire instrument panel, and removing a myriad of trim panels that protect hidden screws. All this simply to gain access to the receiver.

It's not an impossible task for the DIY-er, but it is challenging, so work carefully and stay organized.

Toyota Tundra stereo wiring bundles

A close-up of the stereo wiring bundles (Crutchfield Research Photo)

You can install a single-DIN or double-DIN radio in the Tundra. The radio cavity is 9" deep, so there's no shortage of space to work with. You'll need a mounting kit to trim out the new radio and a wiring harness that allows you to connect your new radio to the factory wiring.

If you have the JBL option, you will have to buy and install a special integration adapter that ties your new car stereo into the JBL's amplified speaker system. You'll need a stereo with two sets of full-range preamp outputs to interface with this adapter; otherwise, you'll need to purchase a 4-channel line output converter.

Crutchfield offers a deep discount on the kits and adapters needed for both the standard and the JBL systems.

When you replace the stock stereo, you'll lose factory options like the AUX input connection, satellite radio, and hands-free cell phone interface. Fortunately, you can replace and probably improve on all of those things with the right aftermarket receiver.

Tools needed: Phillips screwdriver, small flat blade screwdriver, panel tool, 10mm socket, ratchet & extension, pliers

Read our Car Stereo Buying Guide for shopping tips and advice.

Shop for car stereos that fit your Toyota Tundra

Steering wheel audio controls

In most cases, it's reasonably easy to retain your Tundra's steering wheel audio controls when you install a new stereo. When you enter your vehicle information, our database will choose the adapter you need to make your factory steering wheel controls work with a compatible aftermarket receiver.

Replacing your factory speakers

Depending on whether you have the vanilla factory package or the upgraded JBL entertainment system in your truck, the central differences between the two setups are the number and placement of each system’s speaker array.

Toyota Tundra dash speaker

Removing the dash speakers isn't too difficult. (Crutchfield Research Photo)

Standard speaker system

Dash speakers: In the case of the regular system, the factory setup includes a 2" tweeters at each corner of the dash just below the windshield. Replacing the dash speakers is considerably easier than working with the receiver installation, and primarily requires prying up each dash grille and removing two screws.

The only bit of complexity comes when you try to find tweeters that'll fit in these locations. You will have to fabricate mounting brackets for any tweeters you select, and you'll either have to splice into the factory wiring or use a set of Posi-Products speaker connectors.

Toyota Tundra front door speakers

You can install 6-1/2" or 5-1/4" speakers in the front doors (Crutchfield Research Photo)

Front door speakers: Along with this tweeter complement, the Tundra has an oddly shaped 6"x9" speaker built into an integrated bracket installed in each front door. Aftermarket 6"x9"s won't fit because of that integrated bracket, so your best bet is a set of 6-1/2" or 5-1/4" speakers that will drop right in with the help of mounting brackets.

Speaker harnesses are available for both locations. They'll allow you to attach the new speakers to the plugs that connect to the Toyota factory speakers, and they make it easier to reinstall the factory speakers if you ever sell your truck. Crutchfield offers these speaker mounting brackets and wiring harnesses at a deep discount with every speaker order.

The process of installing door speakers is simply requires removal of the door’s sail panel, followed by several hidden screws placed under trim covers, disconnection of the electric door controls and, finally, removal of the entire arm-rest assembly. Once those components are free and clear of the door panel, simply unscrew the door panels, take the panel off the assembly, set it aside, and unscrew four speaker fastenings.

toyota tundra rear door speakers

The Double Cab's rear door (Crutchfield Research Photo)

Rear door speakers: In the Double Cab truck, the rear door factory speaker is a 6-3/4" that's also built into a bracket. And, again, your best bet is a set of 6-1/2" or 5-1/4" speakers that will drop in with the help of mounting brackets. Speaker harnesses are also available for the rear door locations. Replacing the rear speakers is very similar to the front doors except that the process begins with the rear window trim panel.

toyota tundra front door tweeter JBL system

The JBL system includes front door tweeters (Crutchfield Research Photo)

JBL speaker system

JBL's 12-speaker system includes a center dash speaker, two dash tweeters, 6"x9" speakers with separate tweeters in the front doors, 6-3/4" speakers and tweeters in the rear doors, and an 8" subwoofer in an enclosure behind the left rear seat.

The Toyota brochure cites a 440-watt power rating for the JBL amp that powers this system, but these ratings are usually combined peak wattage ratings. That said, you'll still get good results using that special adapter to tie your new car stereo into the JBL system.

If you decide to replace all your speakers while keeping the JBL amp, keep in mind that they're all 2-ohm speakers. You'll want to pick speakers with lower impedances (like JBL or Infinity) to replace them or you'll hear a significant loss of volume. Harnesses are available for all locations except for the tweeters – you'll have to splice into the factory wiring to replace the factory tweeters.

Tools needed: Phillips screwdriver, small flat blade screwdriver, panel tool

Read our Car Speakers Buying Guide for more information

Shop for speakers that fit your Toyota Tundra

jl audio stealthbox

This JL Audio Stealthbox is designed to fit your Tundra

Bass in your Toyota Tundra

JL Audio makes a Stealthbox for the Tundra, which offers one 8" sub in a ported enclosure. This option eliminates the need to remove the under-seat utility box in the Tundra’s extended cab version. The system is placed under the driver-side rear seat. The enclosure is available in Black or Gray.

Learn more about building a bass system in our Car Subwoofer Buying Guide.

Shop for vehicle-specific subwoofers for your Toyota Tundra

weathertech custom floor liners

Protect your truck's carpeting with a set of custom-fit WeatherTech FloorLiners

Other options for your Tundra

Here are some other ways to improve your Tundra:

iPod adapters

If you want to keep your Toyota radio, you'll find several options for connecting and controlling your iPod with the factory radio. You'll want to pay close attention to the qualifiers for these adapters, as some use the changer control port on the factory radio while others use the satellite radio connection.

Remote start and security systems

Adding remote start capability to your vehicle lets you warm it up in the winter or cool it down in the summer. The iDatastart system is incredibly convenient and makes it easier than ever to install a remote start system, so we highly recommend it. The module requires a vehicle-specific T-harness (sold separately) to connect with your vehicle's computer, security, and ignition systems, so we ask that you call to order so that we can make sure you get the right harness for your ride.

You can also talk to your Crutchfield Advisor about a security system. They’re not as easy to install (we usually suggest letting a professional do the job), but we can help you choose a system that’ll work in your Tundra.

Let's get started!

Ready to shop? Use our vehicle selector to find the gear that will fit your car or truck. If you have questions, give us a shout via phone, chat, or email

  • Melvin from Elko

    Posted on 3/7/2021

    Can you get pandora through your jbl stereo on 2007 tundra

    Commenter image

    Jon Paul from Crutchfield

    on 3/8/2021

    Melvin, To the best of our knowledge, you'll need an aftermarket stereo to play Pandora in your Tundra. When you enter your vehicle's info into our Outfit My Car tool, you'll see which stereos fit your truck, plus the correct harness. If you have any questions, our advisors are available via phone or chat.
  • Kevin

    Posted on 6/27/2020

    Any recommendations on where to mount the Bluetooth mic? I read that you shouldn't use the A-pillar since it has airbags.

    Commenter image

    Jon Paul from Crutchfield

    on 6/29/2020

    Kevin, We usually mount the mic on the top of the steering column.
  • Andrew Magill from Rocky Mount

    Posted on 6/14/2020

    I have an 07 tundra with jbl system/nav. Bought a pioneer head unit and want to swap them out. The pioneer supports backup camera which I have but looks like the connections are different. Don't really care about the steering wheel controls but would be nice to still be functional. Guess I need the amp turn on harness you sell? Right now it's all apart and I have no way to connect anything.

    Commenter image

    Jon Paul from Crutchfield

    on 6/15/2020

    Andrew, If you bought your gear from Crutchfield, you can call Tech Support for free help troubleshooting your system. If you purchased your equipment elsewhere, you can still get expert Crutchfield Tech Support - 90 days-worth for only $30. Check out our tech support page for details.
  • Robert Koski from Portland

    Posted on 3/28/2020

    Interested in upgrading the stock system in my 2003 Tundra Access Cab. Thinking 6.5" components in the front doors (mine has the tweeters up high), 6.5" 2- or 3-ways in the back, possibly adding that woofer unit that goes under the back seat. A decent single din head unit should be adequate. But, I am lost when it comes to how to amplify such a setup. Any assistance will be appreciated!

    Commenter image

    Jon Paul from Crutchfield

    on 3/29/2020

    Robert, Sounds like a nifty project! I've sent your question to our sales team, and they'll be contacting you via email soon. For immediate help, you can contact them via phone or chat.
  • David from Madison WI.

    Posted on 9/9/2019

    1 have a stock stereo system in my 2011 Toyota Tundra double cab (no nav, no steering wheel control, no jbl systems). There is only an aux connection which looks to be 1/8" female and I want to add a usb to use my iPhone for pandora, a usb storage device etc. so it needs to connect to the factory head unit. Is there a wiring harness that connects/plugs in directly to the back of the stock unit, that provides a female USB port that I can add to the aux spot or another empty spot next to it? This is just to get me by until I can buy an aftermarket unit and build a system. Please help...any way to do this? Thanks!

    Commenter image

    Jon Paul from Crutchfield

    on 9/10/2019

    David, We can help you figure out a solution. I've sent your question to our sales team, and they'll be contacting you via email soon. For immediate help, you can contact them via phone or chat.
  • Wayne Welch from Milan

    Posted on 11/25/2018

    Been looking at Rockford Fosgate replacement door speakers for my 13 Tundra factory system, w/o JBL or nav. Can I use the 6-1/2 R165X3 3 way speakers for fromt and rear? Website say R1525X2 5-1/4 2 way for the rear. Would like to use the 3 Way 6-1/2s front and rear if possible and would you send the correct adapters to use both? Thanks! Wayne.

    Commenter image

    Jon P. from Crutchfield

    on 11/26/2018

    Wayne, We can help you with that. I've sent your question to our sales team, and they'll be contacting you via email soon. For immediate help, you can contact them via phone or chat.
  • Commenter image

    Jon Paulette from Crutchfield

    Posted on 1/12/2018

    Ricco, This happens, but it's totally fixable. There's a bad connection somewhere, so you (or your installer) will need to go through the system and see what's loose or crossed.

  • Ricco from Paducah

    Posted on 1/11/2018

    I just got a aftermarket pioneer head unit put in my 07 tundra and now my truck it won't stay running

  • Gary L from Cincinnati

    Posted on 9/1/2017

    I have a 2012 Tundra Double Cab with the big box under the back seat. I would love something that puts out more base. Do you just pull that and use the base speakers you have mentioned?

  • Commenter image

    Jon Paulette from Crutchfield

    Posted on 5/24/2017

    Byron, If you bought your gear from Crutchfield, you can call Tech Support for free help troubleshooting your system. If you purchased your equipment elsewhere, you can still get expert Crutchfield Tech Support - 90 days-worth for only $30. Check out our tech support page for details.

Looking for
car stereos?

Car Stereos Shop our selection

Find what Fits your vehicle

Remove

Checking fit...

Compare the sound